Refrigerator Ice Maker & Related

Restore reliable dispensing with this replacement ice container assembly. It stores the ice beneath the icemaker and feeds it to the dispenser, replacing cracked or worn bins that cause jams, noise, or poor ice delivery.

• Stores and holds ice cubes in the freezer until dispensing
• Guides and feeds ice toward the chute when the dispenser is activated
• Maintains proper alignment with the drive to reduce jams and grinding
• Common signs it's needed: cracked/broken bucket, ice won't dispense or is intermittent, loud grinding during dispense, bin won't seat securely

• Disconnect power before service; empty any ice from the old bin
• Press the release, slide the old container straight out; align and slide the new one in until fully seated
• Ensure the rear drive coupling is engaged; do not force the bin
• Restore power and test the dispenser

The Ice Maker is an OEM replacement part for Frigidaire refrigerators. Located inside the freezer compartment, it produces batches of cube-shaped ice automatically on demand. The ice maker features a freshwater inlet, ice-forming tray, and harvest mechanism to eject fully formed ice cubes downward into the storage bin below.

Causes of a bad icemaker can include mineral or scale buildup that interferes with the freezing and ejection mechanisms over time, worn components like the harvest arm or water valve, or problems with the water supply line.

Symptoms of a bad icemaker include:

• Inadequate ice production or none at all
• Partially formed or misshapen ice cubes
• Frequent jams or failures during the harvest cycle
• Leaking water from the production area.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.

The Icemaker Complete Add-On Kit is an OEM replacement part for Whirlpool side-by-side refrigerators. The kit includes the icemaker head, auger motor assembly, wire harness, installation hardware, and more. These allow ice production capability to be added to older refrigerators that were not initially equipped with icemaking.

Causes of a bad icemaker can include wear and tear from regular use, mineral buildup from hard water, and electrical issues that affect the ice production cycle.

Symptoms of a bad icemaker include:

• No ice production or slow ice-making
• Ice cubes that are irregularly shaped or smaller than usual
• Leaks or water pooling in the ice maker area
• Unusual noises during the ice-making process

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This ice container stores the ice made by your refrigerator and feeds it to the dispenser. Replacing a cracked or jammed bin restores smooth dispensing and helps prevent spills, jams, and stray ice in the freezer.

• Holds and organizes ice produced by the icemaker
• Interfaces with the dispenser mechanism to deliver cubed or crushed ice
• Keeps ice contained and accessible for in-door dispensing
• Common symptoms: cracked bin, broken tabs, ice not dispensing or dispensing intermittently

• Unplug the refrigerator and turn off the icemaker/water supply before servicing
• Open the compartment, remove and empty the old bin
• Slide the new container in until it fully seats and engages the drive
• If your model reuses any hardware on the bin, transfer it from the old unit; restore power and test dispense

The Icemaker is an OEM part for GE refrigerators. This part automatically produces ice within the freezer compartment, ensuring a consistent and convenient supply of ice cubes for your household needs. 

Over time, the icemaker may require replacement due to common issues like wear and tear, malfunctioning components, or a failure to produce ice properly.  

Symptoms of a bad Icemaker include:

• Failure to produce ice or producing very little ice
• Ice cubes are smaller than normal or not uniform in shape
• Water leaking inside the freezer compartment
• Strange noises coming from the icemaker unit

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Ice Maker Auger Drive Coupler is an OEM replacement part for GE refrigerators. It is located inside the automatic icemaker assembly. The coupler works together with the auger motor shaft to drive the rotation of the ice transport auger. 

Over time, the drive coupler can wear out or become damaged due to regular use, jamming, or improper handling. If the coupler is compromised, it can hinder the ice dispensing process.

Symptoms of a bad Auger Dispenser Drive Coupler include:

• Ice not dispensing properly
• Grinding or unusual noises from the dispenser
• The auger not rotating when the dispenser is activated
• Loose or wobbly coupler connection

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Ice Cube Tray is an OEM part for LG refrigerators. It is located in the freezer section of the refrigerator and provides a designated space for freezing water into ice cubes. It is designed with individual compartments to form ice cubes in a specific shape and size.

Causes of a faulty ice cube tray can include regular wear and tear, physical damage, or improper handling. These factors can result in issues such as the tray cracking or breaking, difficulty in removing ice cubes, or improper freezing of the cubes.

Symptoms of a bad ice cube tray may include:

• Cracked or broken tray
• Difficulty in removing ice cubes from the tray
• Irregularly shaped or improperly frozen ice cubes

This OEM LG part can also be used on Kenmore/Sears appliances. 

The Ice Container Assembly is an OEM replacement part for Frigidaire refrigerators that stores ice made by the ice maker. It includes the container, auger for ice dispensing, and other mechanisms for storage and dispensing. 

A bad Ice Container Assembly can result from container cracks or damage, causing ice spills, auger wear affecting dispensing, blockages halting ice movement, and parts wear hindering efficient ice dispensing.

Symptoms of a malfunctioning Ice Container Assembly include:

• Inability to dispense ice.
• Ice clumping together, indicating a possible air leak or temperature issue within the container.
• Unusual noises during operation, which could point to a mechanical problem with the auger or other components.
• Leakage or water accumulation, suggesting a crack or damage to the container.

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Ice Container Assembly is an OEM part for Frigidaire refrigerators. This part stores ice produced by the icemaker, allowing for convenient access and organization of ice within the freezer compartment.

Causes of a bad ice container assembly can include wear and tear over time, damage from frequent handling, or cracking due to extreme temperature changes.  

Symptoms of a bad ice container assembly include:

• Cracks or damage to the container
• Leaking water or melted ice
• Ice not dispensing properly
• Unusual noises from the ice storage area

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Ice Container Assembly is an OEM part for Frigidaire refrigerators. This part collects and holds the ice produced by the icemaker.

Causes of a bad Ice Container Assembly can include physical damage from impact or mishandling, freezing and cracking due to extreme temperatures, or general wear and tear over time.

Symptoms of a faulty Ice Container Assembly include:

• Ice not dispensing properly or getting stuck
• Cracks or damage to the container itself
• Leaks or water accumulation around the container
• Difficulty removing or reinserting the container

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Ice Maker is an OEM part for LG refrigerators. It is designed to produce ice within the refrigerator, ensuring a consistent supply of ice for your household needs. The ice maker unit fits seamlessly into the freezer compartment and is responsible for the automatic production and harvesting of ice cubes, providing convenience and efficiency.

Causes of a bad ice maker can include a faulty water inlet valve, issues with the ice maker module, or a malfunctioning thermostat. Additionally, mineral buildup or clogging in the water line can impede the ice-making process.

Symptoms of a bad Ice Maker include:

• No ice production
• Ice cubes are smaller than usual
• Ice maker not dispensing ice
• Unusual noises from the ice maker area

This OEM LG part is also compatible with Sears/Kenmore.

The Icemaker is an OEM part for Whirlpool refrigerators. It is responsible for producing ice within the freezer compartment. The icemaker automates the ice-making process, ensuring a steady supply of ice without manual intervention.

Causes of a bad icemaker can include wear and tear over time, clogging or blockage in the water supply line, electrical issues affecting the icemaker's functionality, or damage due to mishandling or impact. It is important to maintain the icemaker and ensure the water supply is clean and free from obstructions to prolong its lifespan.

Symptoms of a bad icemaker include:

• No ice production
• Slow ice production
• Ice cubes are smaller than usual
• Ice cubes are malformed or hollow
• Leaking water around the icemaker

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Ice Container is an OEM replacement part for Frigidaire refrigerators. It is responsible for storing ice produced by the ice maker.

Causes of a bad ice container can include wear and cracks that develop over repeated use and cleaning. Minerals or scale deposits may also accumulate inside over time.

Symptoms of a bad ice container include:

• Ice spilling or leaking out of the container 
• Cracks or breaks that compromise the storage cavity
• Chipping of the plastic coating inside the container

This OEM Frigidaire replacement part is compatible with refrigerators from Electrolux, Gibson, and Kelvinator as well.

The Refrigerator Ice Maker Assembly is designed to restore the ice-making functionality of your Samsung refrigerator. This genuine OEM part ensures a perfect fit and seamless integration with your appliance, maintaining the high performance you expect. The assembly is crafted with durable materials, providing reliable ice production and consistent cooling. Replacing a faulty ice maker can enhance the convenience of your kitchen, allowing you to enjoy fresh ice whenever you need it. Installation is straightforward, making it a suitable choice for DIY repairs and saving you time and money on professional services. The Refrigerator Ice Maker Assembly not only brings back the essential feature of ice making but also helps maintain the overall efficiency of your refrigerator. Compatible with a range of Samsung refrigerator models, this genuine OEM part guarantees longevity and optimal performance. By choosing this high-quality replacement, you ensure your appliance continues to operate smoothly, offering the best possible experience in your home.

The Ice Crusher Bucket is an OEM part for Whirlpool refrigerators. It serves as a container for holding and crushing ice from the icemaker. The bucket houses the crushing mechanism that breaks down ice cubes into smaller pieces, making it convenient for dispensing crushed ice through the refrigerator's door.

Over time, the ice crusher bucket can become worn out or damaged due to regular use, exposure to moisture, or accidental impact.  

Symptoms of a bad ice crusher bucket include:

• The bucket not holding ice properly
• Issues with dispensing crushed ice
• Unusual noises during ice crushing
• Visible cracks or damage to the bucket

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Ice Container is an OEM part for Whirlpool refrigerators. It is designed to store ice produced by the in-door ice maker, ensuring easy access and efficient ice management within the freezer compartment.

Common issues include cracks or breaks in the plastic, which can lead to ice spilling or difficulty in handling the container. 

Symptoms of a bad ice container include:

• Ice spilling out or leaking from the container
• Difficulty inserting or removing the container
• Visible cracks or damage
• The container not sitting properly in its designated space

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.