Need Help?
Call or text
Usually ships within 4 - 14 days
Replacement drive control cable for wheeled line trimmers. Connects the control lever to the transmission. Replace if cable is frayed, broken, or worn.
This genuine Husqvarna replacement fuel tank contains the fuel that is responsible for running the engine of the lawnmower. Fuel tanks are also responsible for preventing leaks and keeping the fuel from running dirty.The fuel tank of a lawnmower might need to be replaced in the case of punctures or cracks in the exterior of the tank. If there is a noticeable amount of fuel leaking or there is dirt or debris found in the fuel tank, the fuel tank should be removed and replaced immediately. The lawnmower should not and cannot be used until the fuel tank has been replaced. A replacement generally takes about 20-30 minutes and can be performed using a flathead screwdriver and clamps.This OEM fuel tank is compatible with the following lawnmower brands: Husqvarna, Craftsman, Poulan, Roper, and Weed Eater. This part is sold individually.
Choke control cable for riding mowers and lawn tractors. Connects engine choke to control panel. Replace if cable is frayed, broken, or stuck.
Push nut fastener for riding mowers and lawn tractors. Secures panels, guards, and trim components. Replace if cracked, missing, or no longer gripping.
Upstop bracket for walk-behind mowers. Mounts to the deck to support and position the handle assembly. Replace if bent, cracked, or damaged from impact.
This genuine Husqvarna oil cap can be used as a replacement part for string trimmers, chainsaws, pole pruners, and pole saws. An oil cap in a small engine appliance provides a shield between the fuel line and the exterior of the appliance such that dirt, debris, pebbles, or other external materials cannot enter into the fuel line and such that fuel cannot leak out of the appliance.If an oil cap shows visible signs of damage, it should be removed and replaced immediately with this genuine OEM replacement part. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This oil cap is compatible with the following brands: Husqvarna, Poulan, and Weed Eater.
This replacement driver spring is a genuine OEM part for a string trimmer with a starter rope ignition. When an operator pulls the starter rope, the rope must recoil back into the starter assembly before it can be used again. This spring connects to a driver pulley in the starter assembly and maintains the right amount of tension needed to recoil the pulley. Over time, driver springs will begin to lose some of their tension. This is especially true if the operator is quite rough on their appliance. Pulling too hard on the starter rope can wear out the spring more quickly, making it less effective. Without a properly tensed driver spring, the starter rope will not recoil into the assembly. To change out the spring, use a nut driver to open the starter assembly and remove the pulley to get access to the old spring. Carefully remove it and install the new part. This replacement driver spring is a high-quality part designed to match the exact specifications for a Husqvarna or Jonsered appliance. This part is sourced from its original manufacturer and ships individually.
This starter spring is a genuine OEM replacement part for chainsaws that operate using a starter rope. When an operator pulls the starter rope out, there is a pulley around which the rope then has to recoil. The starter spring maintains tension in the pulley so that the rope will naturally recoil. The starter spring also provides enough tension to prevent the operator from yanking the rope all the way out of the assembly. Through repeated use, and especially if an operator is rough on their appliance, the starter spring can loosen up and will no longer work as effectively. When this happens, the starter pulley will not recoil and the starter rope will hang loose from the appliance. Fortunately, switching out the starter spring is an easy repair that should only require a wrench and a pair of pliers. Be careful when pulling the old spring out. Although it isn't as tense as it once was, it still has the potential to snap back. This replacement starter spring is a high-quality part for Husqvarna, Poulan, and Weed Eater appliances, and as such, it is sourced from its original manufacturer. This part does not ship with any additional hardware.
A new rope kit may be necessary if the original rope becomes deteriorated or frays with regular equipment use.This rope is part of the recoil starter assembly, an essential component that enables the motor to be pull-started. Due to frequent usage and wear and tear, the rope can easily fray. Without this rope the engine cannot be manually pull-started. It is manufactured from durable nylon.This Husqvarna rope kit is a genuine OEM replacement part that has been sourced directly from the manufacturer. This replacement Husqvarna rope kit fits various different models of Husqvarna, Poulan, and Craftsman blowers, trimmers, and hedge trimmers. Please note this is sold individually. Handle grip not included.
Keep your trimmer running clean with this air filter. Catches dirt and debris to protect the engine. Replace when clogged or damaged for optimal performance.
Trimmer won't start or rope won't retract? This recoil starter assembly includes pulley, rope, and handle for reliable pull-start operation.