Need Help?
Call
Complete fuel tank assembly for gas line trimmers. Includes translucent plastic tank, fuel filter, cap, and fuel line. Replaces cracked or leaking tanks.
Usually ships within 4 - 14 days
Replace a damaged or worn control cable for your wheeled gas line trimmer. Installs to enable forward propulsion and stopping control functions.
Complete engine gasket kit for gas leaf blowers. Replace when engine runs rough, overheats, or loses power. Includes all essential gaskets. Verify fit.
Cylinder head for gas leaf blowers. Caps the cylinder block to seal the combustion chamber. Replace if cracked, warped, or damaged from overheating.
Piston ring seals the cylinder wall and piston groove in gas trimmers, edgers, and blowers. Replace if cracked, broken, or worn to restore proper seal.
This air cleaner element is a genuine Echo replacement part for small engines that operate hedge trimmers. The function of an air cleaner element is to create a seal that protects the engine from collecting and taking in external dirt and debris that might debilitate the engine's infrastructure. The air cleaner element could fail from overuse; it is a part that must eventually be replaced as a part of routine maintenance, even with ordinary long-term use. If the air cleaner element is not effectively sealing, the rate at which the engine takes in air is lessened, thereby reducing the power and the fuel economy of the engine. If this occurs and it is determined that an overused or over-aged air cleaner element is at fault, as opposed to the air filter or another closely associated part, the air cleaner element should be replaced immediately and the appliance at hand should not be in use until it has been replaced. This air cleaner element is compatible with Echo brand hedge trimmers. This part sold individually.
Replacement muffler for gas leaf blowers. Reduces engine noise and maintains proper exhaust pressure. Replace if cracked, rusted, or excessively loud.
This is a chain bracket ensures the chain on the equipment remains attached and stable when the lawn tool is being used. This chain bracket is made of durable materials but over time, it can wear out or experience damage. If there is substantial damage or the chain bracket has broken, it will need to be replaced.If a replacement is needed, work gloves and a wrench set will be needed. Make sure the chainsaw is powered off and the spark plug wire has been removed from the equipment. The clutch itself will first need to be removed to get access to the chain bracket. Remove the old chain bracket using a wrench and take the new bracket and place it in the same location. The chain will interlock with it. Make sure it is tightened properly before putting the spark plug wire back on.This is a genuine OEM replacement chain bracket that is directly sourced from the manufacturer. It is sold as an individual component. The chain bracket is designed to be used with chainsaws and string trimmers manufactured by Poulan, Poulan Pro, and Craftsman.
If your edger won't start or shut off, the on/off switch may have failed. This switch assembly controls engine operation and is straightforward to replace.
Reversible slide shoe for edgers. Installs on the base to protect and guide the unit. Replace when cracked, worn through, or damaged on both sides.
Fix trimmer that won't accelerate, makes grinding noises, or emits burning smell. Clutch assembly connects engine to cutting head. Moderate DIY repair.
This gasket kit features replacement gaskets for use in a range of gas-powered handheld lawn and garden machines. The kit includes a range of O-rings, seals, and gaskets used as a means to provide tight seals between elements of the engine to prevent leaks from air, fuel, oil, and so forth. Even durable gaskets such as those found in engines will start to wear down over time. They can start to crack and break, and sometimes they will shrink. When this happens, they no longer provide a tight seal and will need to be replaced. It is recommended that the gaskets and seals are replaced whenever the owner is servicing their small engine. This will ensure a proper seal when the engine is reassembled. This gasket kit has genuine OEM parts to ensure a proper fit and a tight seal. The kit is sold individually and works with many models of string trimmer and edger. Compatible brands include Craftsman, Husqvarna, Weed Eater, and Poulan.
Trimmer head won't spin or engages slowly? The clutch drum assembly connects the clutch to the flex shaft and cutting head. Direct replacement part.
This replacement oil tank for a pole pruner or chainsaw is an authentic OEM replacement part. The inner workings of an engine consist of many moving parts. These parts are mostly made of metal and they thrash about against each other to produce and transfer energy. Engines use oil to lubricate these parts so that they do not rub and create friction as this would cause the engine to overheat. This oil tank lets operators quickly top up their engines with oil without having to take apart the inner mechanics. Oil tanks are made of durable reinforced plastic but it is still possible to bang, dent, or even puncture them. Should this happen, oil will leak from the tank and the engine will be starved of lubrication. For safety purposes, it is important to immediately replace a broken oil tank. To do so, use a wrench to remove the old tank and install the new part with the same bolts. This oil tank is compatible with Poulan and some Husqvarna appliances, and as a high-quality replacement part, it comes sourced from its original manufacturer. This part includes an oil tank and oil tank cap but it does not include an oil line.
This authentic OEM part is a replacement momentary switch meant for a chainsaw or edge trimmer. Also known as a kill switch, a momentary switch acts as a safety measure to immediately shut off the appliance's motor. If the user begins to lose control of the appliance, they can simply hit the momentary switch and the engine will disengage even if it is not currently in the off position. This helps to prevent accidents and bodily harm. When engaged, the engine requires a five second waiting period before it can restart. Over time and through repeated use, switches can naturally become worn out. They may also be damaged if knocked against something hard on accident. Replacing this switch will require a screwdriver to access the switch located in the handle of the appliance. Once accessed, the switch can easily be replaced by detaching the wires and inserting the new part. Be sure to follow the user's manual as this process will vary depending on the appliance. This part is sourced directly from its original manufacturer and will work with Poulan and Weed Eater appliances. This part ships individually.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.