Wall Oven Control Board

The part I ordered was easy to replace and it fixed the problem! Read more

Not having any local Thermador support I took the advise from KC on the repair forum. The repair consisted of removing and replacing the control and relay board. The hardest part of the job was working behind the stove while it was pulled from the wall. ( didn't want to scratch my floor ). Over all the repair was simple just pulling wires from old board and installing on new board. The directions sent with the parts are excellent and easy for anyone to follow. I am glad I found this site... I... Read more

1. I ordered a new burner. It didn't fix it. 2. I ordered a new burner switch. It didn't fix it. But still needed to be replaced because I cold see itt had burned out. 3. I checked the wires to the burner, then to the switch, they were all fine. I probably should have done this first. My last possible solution was the simmer switch board. I couldn't visually see any points of failure but it really was my last resort before calling a repair man or buying a new stove. 4. I ordered new... Read more

Replaced with this igniter. Read more

Changed the motherboard Read more

After researching on line what the error code meant I ordered a new electronic control board and oven sensor. It is important to make sure you have all the details of your model number when looking for a part. The oven technician looked at our oven said the replacement parts were no longer being made. I went on line and got the same answer until I saw my model number and a 13 after it. I clicked on the link and the control panel was exactly the same as mine. With a flashlight I was able to look... Read more

I started searching for the model number online and GE did not have any info but I found appliancepartspro.com, they had the control board which I was looking for, so I called them before I bought it, they confirmed the part and put the order in. I had the part the next day and installed that night, it worked perfect and is continuing to work. With the warrantee of 365 day I can't go wrong. Thanks Read more

We replaced it with new Oven Control. Read more

I ordered a new control online and replaced it in about twenty minutes. Read more

I replaced the digital oven controller. Read more

This couldn't have been simpler! Removed the glass panel by taking out 4 screws on the bottom that were accessed by opening the oven door. Lifted up, then pulled the panel forward, released one electrical connection, and the panel was disconnected and could be laid on a flat surface. Unscrewed the four nut screws on the old control board with a socket set (you could use a small wrench, but it would be tedious), un-clipped the wide ribbon connection ( had to pry it off very gently to avoid... Read more

Replaced control board/clock/timer Read more