Wall Oven Touch Pad

This is a control panel overlay for the electronic oven control on select ranges and wall ovens. It restores clear, readable button labels and refreshes the panel appearance while shielding the control face from everyday wear.

• Provides printed legends/icons for clock, timer, and oven functions
• Adheres to the EOC face to protect it from splashes and cleaning abrasion
• Use when the original overlay is faded, peeling, bubbled, cracked, or illegible
• Model-specific layout ensures the correct key positions and markings

• Disconnect power to the appliance before beginning any disassembly
• Remove the control panel/trim to access the old overlay; retain all hardware
• Carefully peel off the old overlay and clean residual adhesive; allow the surface to dry completely
• Align the new overlay with the display and key openings and apply evenly to avoid bubbles

This is the graphic control panel overlay for the oven/range user interface. It restores legible labels and a clean appearance for touchpad buttons, helping you see and select functions accurately when the original film is worn, bubbled, or damaged. What it does

• Adheres to the control panel/touchpad to provide printed button labels and icons
• Protects the underlying keypad from spills and cleaning wear
• Helps resolve faded, peeling, or unreadable control markings
• Can improve button feel and responsiveness when the old overlay is lifting
• Restores a finished, factory look to the control panel

• One control panel graphic overlay

• Disconnect power to the appliance before starting
• Clean and dry the control panel surface thoroughly; remove all adhesive residue
• Align carefully before applying—once set, adhesive may not reposition cleanly
• Press firmly and evenly to ensure full adhesion and avoid bubbles

The Overlay is an OEM part for Frigidaire ranges. It is a cosmetic component that covers and protects the control panel of the range. With a scratch-resistant surface, the overlay shields control buttons and displays from wear and spills in the kitchen. 

Symptoms of a bad overlay include:  

• Cracks, peels, or missing pieces in the overlay surface
• Faded or discolored graphics that are difficult to read  
• Exposed wiring or components under a broken overlay

Causes can be normal wear and tear over time, exposure to heat from the nearby cooktop, or damage from impacts or sharp objects.

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This is a Whirlpool range control panel assembly. It houses the display, user interface buttons, and has space for temperature control knobs. With extended use, the buttons on a control panel may wear out or stop responding to user input.Before installing this part, be sure to cut power to the appliance and allow it to cool completely. The stove may need to be pulled away from the wall to access the screws holding the old control panel in place. Remove the screws from each side of the old control panel to disconnect it, then carefully remove any boards or other components installed within the panel. Once it has been completely removed, the new control panel can be installed in its place.This is a genuine OEM part compatible with ranges manufactured by Jenn-Air, but may also work with other Whirlpool brands, including Maytag, KitchenAid, Amana, Magic Chef, Admiral, Norge, Roper, and others. This product is just the panel and contains no additional parts or hardware.

Color: Black

The Overlay is an OEM part for GE gas ranges. This overlay is a part that adheres to the front of the electronic control panel, providing a clear, labeled interface for the user. It details the button functions, temperature settings, and various other controls.

Causes of damage to the overlay often involve regular cleaning with abrasive materials or harsh chemicals that can wear away the print and adhesives, exposure to heat and steam, or accidental scratches and impacts during kitchen activities.

Symptoms of a bad Overlay on a gas range include:

• The labels on the overlay fading or peeling away
• Damage such as cracks, bubbling, or tears in the overlay, which can allow moisture or grease to get behind it, possibly damaging the electronic control panel.
• General wear and tear that diminishes the aesthetic appeal of your gas range

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Includes the touchpad membrane switch.

This complete parts assembly replaces a damaged or worn internal assembly to restore proper fit and function. Use it to repair an appliance component assembly and help the unit operate as intended. What it does:

• Replaces the original internal assembly that secures or connects related components
• Restores mechanical and/or electrical connections to help correct intermittent operation
• Can address symptoms like a non-functioning subassembly, degraded performance, or unusual noises tied to a damaged assembly
• Matches OEM form and mounting points when the correct part number is used

• One parts assembly

• Disconnect power (and water, if applicable) before beginning any repair
• Use basic hand tools and avoid force when removing clips or fasteners
• Retain all fasteners and orient the new assembly to match the original

This adhesive graphic overlay covers the electronic control panel, restoring clear, readable button labels and a clean, factory appearance. It helps you operate settings confidently when the original overlay becomes worn, faded, or damaged. What it does:

• Provides printed labels/icons for the electronic control's buttons and display
• Protects the control face from everyday use, spills, and cleaning
• Common symptoms: peeling edges, bubbling, cracking, discoloration, or unreadable text
• Cosmetic component; if keys don't respond, the keypad or control board may require service

• 1 adhesive control panel overlay

• Disconnect power before servicing
• Remove the control panel/EOC as needed to fully access the old overlay
• Carefully peel off the old film; remove all adhesive residue and clean the surface with isopropyl alcohol
• Test-fit alignment, then peel and apply from one edge while smoothing to avoid bubbles

This control panel overlay (T09-B) is the decorative face for the appliance control console, restoring button labels and appearance while protecting the underlying switches and electronics from spills, grease and everyday wear. What it does:

• Provides labeled button and indicator surfaces so controls are clear and easy to read.
• Protects the control board and switches from splashes, food residue and dirt.
• Replaces faded, cracked, peeling or scratched overlays that hurt appearance and usability.
• Can help with button errors caused by a worn or damaged overlay by restoring proper button contact surfaces.

• Disconnect power to the appliance before starting any repair to avoid shock or injury.
• Remove the control console or trim per the service manual to access the overlay; avoid forcing parts.
• Peel away the old overlay, clean and dry the mounting surface, then align and press the new overlay evenly; some overlays use adhesive and may require light pressure.

This control panel assembly is the front console that houses the oven/range user interface and display, restoring visible controls and user input so you can select cycles, set temperatures, and monitor settings. What it does

• Contains the control interface (buttons/touchpad and display) used to select functions, temperatures and timers.
• Re-establishes visible feedback and input when buttons are unresponsive or the display is blank or flickering.
• Helps restore control of oven/range functions when the console is cracked, damaged, or failing.
• Works as the direct replacement for the damaged or nonworking control console to return normal user operation.

• Disconnect power at the breaker or unplug the appliance before starting—electrical shock hazard.
• Handle the display and trim carefully to avoid damage; some wiring harnesses or connectors must be disconnected and reattached.
• Keep track of screws and retainers; a basic screwdriver set is usually required.

This factory-specified parts assembly replaces a damaged or missing original assembly in your appliance. Restoring the correct fit and function of the affected components helps the unit operate as designed after wear, damage, or prior service.

• Direct replacement for the assembly identified in your model's parts diagram
• Can help resolve loose or misaligned components, vibration/rattling, or incomplete installation
• Matches original design for consistent fit and performance
• Useful when original pieces are lost or damaged during service

• Disconnect power before service; shut off gas or water if applicable
• Allow the appliance to cool; wear cut-resistant gloves for sharp edges
• Use your model's service manual/parts diagram to take reference photos
• Reassemble panels and test operation after installation

This control panel is the front user-interface assembly for your range/oven. It restores a clean, readable console so you can see the display and reliably select settings after the original panel is damaged or unresponsive.

• Provides the front control surface for selecting cooking modes, temperatures, and timers
• Supports and aligns the user interface components and display behind the console
• Replaces cracked, warped, or discolored panels to restore appearance and usability
• Typical symptoms include unresponsive or intermittent keys, blank/dim display, and worn or broken fascia

• Disconnect power at the breaker before servicing; for gas ranges, also shut off the gas supply per the manufacturer's instructions
• Remove console/backguard fasteners and carefully release any ribbon cables and harnesses
• Transfer any reusable items (overlay/keypad, lens, brackets, screws) from the old panel if required by your model
• Use ESD protection when handling electronics and ensure all connectors are fully seated before restoring power

This part is a replacement control panel assembly. This part can be used to replace a broken or defective control panel in a variety of oven models. The control panel ensures the user can properly and safely adjust and maintain the oven temperature and settings. The appliance may not work properly, if at all, if this part is broken in any way. Thus, it will need to be immediately replaced. Always disconnect power from the appliance before starting any work or repairs. It is recommended that work gloves are worn to protect the hands.This is a genuine OEM part made by GE and has been sourced directly from the manufacturer. As an authentic replacement part, this control panel assembly is suitable for use on ovens that have been manufactured by General Electric, Hotpoint, and some other brands. This is a genuine part made of high-quality, durable materials and is sold individually.

Color: White

Replace a damaged or worn console with this control panel assembly. It restores a clean, secure mounting surface for the user controls and helps protect internal components so your appliance looks right and operates as intended.

• Houses and supports the user interface components (buttons/knobs/keypad and display bezel)
• Keeps controls aligned and securely mounted for proper operation
• Shields internal wiring and control electronics from incidental contact
• Helps resolve issues like loose controls, cracked or warped console fascia, and heavy cosmetic wear

• Disconnect power at the breaker or unplug the appliance before starting; shut off gas supply if applicable
• Remove any knobs/trim and the screws securing the old panel; support the panel while detaching
• Transfer required hardware, bezels, and brackets from the original panel to the new one
• Reassemble carefully and verify controls move freely before restoring power