Need Help?
Call or text
Oven won't ignite or clicks but doesn't light? This bake burner with spark igniter fixes grounding issues and ignition failures. Easy DIY repair.
Replaced igniter under oven floor panel. Read more
Fix burners that click but won't light with this gas range surface burner igniter. DIY-friendly repair takes about 10 minutes with basic tools.
First I watched the repair video, and then was successful in changing out two of the Ignitor's on the surface Burners, it worked great ! Read more
Fix a broil burner that won't light or clicks repeatedly. This spark electrode generates the ignition spark needed for reliable broil operation.
Replaced the igniter. Read more
Fix burners that won't click or ignite without turning on another burner. This spark electrode creates the spark needed to light gas burners. DIY repair.
Of course, before disassembling anything, I unplugged and turned off the gas supply. To replace the spark electrode, I removed the drip pan/surface to gain access to the burner assemblies. Next, I unscrewed (with a 1/2" open-end wrench, I think) and disconnected the gas supply tubing from the burner assembly with the cracked electrode, and then unscrewed the assembly itself from the base surface. With the assembly detached, I flipped it over and removed the screw that secured the cracked... Read more
Fix a gas burner that won't light or clicks but doesn't ignite. This range surface burner igniter creates the spark to light your stovetop. 15-30 min repair.
I removed the burners and replaced the igniters. The burners must be removed because the igniters go underneath them. This job turned out to be very difficult because my stove is 16 years old and the screws holding down the igniters were completely rusted and bound to the stove top, so I had to drill out all of the screws. Also, the burners were bound to the gas flues by mineral deposits and separating them was very difficult. Once I got the stove top up, I threaded the igniter wires to the... Read more
If your gas burner won't light or clicking but no spark, the spark electrode may be faulty. This part generates the spark to ignite gas burners.
Oven won't light or smells gas? This bake burner spark electrode creates the ignition spark to light the flame. Simple DIY fix restores reliable ignition.
Had a repair person come into my home and he suggested a different ($200) part, labor would have been another $125. Seeing that it would cost almost $400 fix it, we were just going to buy a new oven. The next day, I called Appliancepartpros and spoke to someone from their support. I explained the symptoms and they suggested this $50 part and told me that I could return it, even if it didn't work. Figured I had nothing to lose. Based on the diagram they sent, I was able to fix the oven (I'm... Read more
Burner won't light or clicks continuously? This spark electrode creates the arc that ignites gas at the burner. Simple DIY repair restores ignition.
Took apart the top of the stove and replaced ignitor Read more
Oven won't heat but igniter glows? This flat-style igniter draws 3.2-3.6 amps to open the gas valve. DIY-friendly repair with wire connectors included.
Replaced the oven igniter, following the general instructions on the ApplicancePartsPro.com website. It took me a little while to figure out how to get to the wiring for the igniter, as I had no access panel on the back to get to the wires. In my particular Whirlpool oven (very old model) it turned out that you have to remove the pots/pans drawer under the oven to get to the exposed wiring at the back. Once I figured this out, the rest of the replacement was a snap. Read more
Burner won't spark or light? This range top burner igniter creates the spark to ignite gas burners. Easy 15-minute DIY fix for cracked igniters.
I found the model number on the stove and ordered a replacement. It arrived in two days. I replaced the old one and it works great. Read more
Fix a burner that won't light or clicks repeatedly with a new spark electrode. Creates the electrical arc that ignites gas at your cooktop burner.
I replaced all 4 ignitors and new clips. Read more
Fix burners that won't light with this spark igniter electrode. Simple DIY repair—hardest part is accessing the back panel. Test for continuity first.
Internet suggested if yellow light happened time to replace. Bought two since I was having trouble with both for years. Would have been nice for a video to exist. The removal was nothing like what is out there and extended the time of the job. Read more
Fix burners that won't light or spark intermittently with a new surface burner igniter. Most DIYers complete this repair in 20 minutes with basic tools.
I disassembled the top of the range and looked at the problem burner. It looked like there was a spark at all three other burners but not the problem burner. There was a visible spark at the connector between the wiring harness and the ceramic igniter but that spark wasn't making it up to the top of the igniter where it can light the burner. I ordered a new igniter for $19 and it was on my doorstep the next day. I replaced the part and now my wife thinks I am a genius. Don't tell her that... Read more
Fix burner clicking or failure to light with a new surface igniter. Restores reliable spark ignition on gas cooktops and ranges. DIY repair in 15 minutes.
Fixes burners that won't light or require manual ignition. This electrode creates the spark to ignite your range's surface burner flame automatically.
Burner won't light or clicks excessively? This spark electrode ignites the gas on your cooktop. Simple repair restores reliable ignition in minutes.