Whirlpool Handle

The Oven Door Handle is an OEM part for Whirlpool wall ovens. This handle allows for easy, safe opening and closing of the oven door during use. 

Causes of a bad door handle can include wear and tear from repetitive use over time, damage from improper cleaning methods, or cracks/breaks from accidental impact.

Symptoms of a bad oven door handle include:

• Loose, wobbly, or unstable door grip 
• Cracks or splits in the handle material
• Handle completely detached from door

This replacement handle is also compatible with select Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore wall oven models.

The Rotating Handle is an OEM part for Whirlpool mixers. It allows you to raise and lower the mixing bowl for convenient access during the mixing process.

A bad rotating handle can be caused by regular use, accidental damage, or excessive force applied during operation. If you notice cracks, a loose or wobbly fit, or difficulty in rotating the handle smoothly, it may indicate a problem with the handle itself.

Symptoms of a bad rotating handle include:

• Cracked or damaged handle surface
• Loose or insecure fit of the handle on the mixer
• Inability to raise or lower the mixing bowl 

Replace your faulty handle with this genuine OEM part to restore your mixer. 

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

Color: Grey

The Handle End Cap is an OEM part for Whirlpool refrigerators. It covers and protects the end of the refrigerator's door handle.

A bad door handle end cap can be caused by regular wear and tear, accidental damage, or exposure to harsh cleaning chemicals. If you notice cracks, discoloration, or a loose fit of the end cap on your refrigerator's door handle, it may indicate a problem with the cap itself.

Symptoms of a bad door handle end cap include:

• Cracked or damaged 
• Discoloration or fading 
• Loose or wobbly fit on the handle

Replace your faulty door handle end cap with this genuine OEM part to restore your refrigerator's handle. 

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

Color: Black

The Handle is an OEM part for Whirlpool refrigerators. It provides the means to easily open and close refrigerator and freezer doors with an ergonomic grip.

Causes of a bad door handle can include cracks, breaks, or missing components that compromise secure closing of doors. Over time, handles can lose tension or experience wear to moving parts.

Symptoms of a failing door handle include:

• Difficulty opening or closing doors securely
• Excessive movement or wobbling of the handle
• Detached or missing handle components
• Inability to open doors fully without force

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement door handle restores a secure, comfortable grip for opening and closing your appliance door. Swap a cracked or loose handle to improve safety, function, and appearance. What it does:

• Provides the handhold needed to open and close the door safely
• Replaces cracked, broken, or wobbly handles
• Helps prevent further door damage from a loose or missing handle
• Common symptoms include a loose handle, broken posts, or difficulty opening the door due to handle failure

• Includes 1 door handle

• Disconnect power to the appliance before servicing; allow hot surfaces to cool
• Support the door and protect glass/finishes while working
• Use correct tools for the mounting screws; transfer any existing trim as needed
• Tighten hardware snugly without overtightening to avoid damage

This genuine replacement door handle restores a secure grip and smooth operation to your appliance door. It replaces a worn, cracked, or broken handle so you can open and close the door safely and comfortably. What it does:

• Provides a sturdy handhold for opening and closing the appliance door
• Replaces cracked, loose, or broken handles that cause difficulty operating the door
• Restores proper alignment and fit where the original handle has worn or failed
• Helps reduce accidental slippage or dropping of the door during use

• One door handle

• Handle requires basic hand tools for removal and installation; refer to your model's service instructions
• Keep the appliance unplugged or power disconnected when working near electrical components
• Tighten mounting fasteners securely but avoid over-torquing to prevent cracking
• If the handle mounts to an inner door panel or trim, support the door edge to avoid damage during installation

This door handle pad sits between the handle standoffs and the door panel. Replacing a worn or missing pad cushions and stabilizes the handle, helps reduce rattles, and protects the door finish at the handle mounting points. What it does:

• Cushions handle-to-door contact to help prevent scuffs and wear
• Helps stabilize the handle and maintain proper spacing/alignment
• Reduces vibration and rattling during door operation
• Replaces a missing, flattened, or deteriorated pad

• 1 door handle pad

• Disconnect power before servicing
• Remove handle mounting screws and note the original pad's placement/orientation
• Position the new pad and reinstall the handle; do not overtighten screws
• The handle is secure and the door opens/closes smoothly

Replacement handle set for refrigerator doors that restores a secure grip and smooth door operation while refreshing the appliance's appearance. Direct-fit replacement designed to match original mounting points for a factory look. What it does:

• Replaces cracked, broken, loose or missing refrigerator door handles so doors open and close safely.
• Provides the proper leverage and grip for normal door operation.
• Matches original mounting locations for a secure, aligned fit.
• Refreshes the appliance's appearance when handles are worn or damaged.

• Unplug the appliance or switch off power as a safety precaution before starting work.
• Remove any trim or decorative covers to access mounting screws; retain original fasteners unless replacements are provided.
• Use the correct hand tools and avoid overtightening screws to prevent cracking the handle.
• Check handle alignment and door operation after installation; adjust if necessary.

This door handle spacer fits between the handle and the door panel, providing the correct standoff and a clean, finished look. Replacing a worn spacer helps keep the handle secure and aligned.

• Maintains proper spacing between the handle and door surface
• Helps stabilize a loose or wobbly handle
• Replaces cracked, discolored, or missing spacers
• Color: Bisque (cream/tan finish) to match compatible appliances

• Disconnect power and allow the appliance to cool before servicing
• Support the door and handle while removing mounting screws
• Transfer or replace spacers on both sides of the handle if needed; do not overtighten screws
• Wear gloves to protect hands and avoid stressing glass panels

Color: Stainless

The Door Handle is an OEM replacement part for Whirlpool refrigerators. It serves as a convenient and comfortable grip for opening and closing the refrigerator door.

A bad handle can occur due to physical damage, wear and tear, or improper installation. If you notice symptoms such as a loose or broken handle, difficulty in opening or closing the door, or an unattractive appearance, it may be time to replace the door handle.

Symptoms of a bad refrigerator door handle include:

• Loose or broken handle
• Difficulty in opening or closing the door
• Unattractive or worn-out appearance

Restore your refrigerator by replacing the faulty or damaged door handle with this genuine OEM part.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

This mid-length handle replaces a damaged or missing pull on compatible Whirlpool-built units, restoring a secure, comfortable grip and the original look so your door or drawer opens smoothly and stays aligned with adjacent handles.

• Provides the handhold needed to open and close the appliance door or drawer
• Replaces broken, cracked, loose, or missing handles to restore function and appearance
• Helps correct wobble or misalignment caused by a fatigued handle
• Typical symptoms: difficulty opening, handle spins or falls off, visible cracks or scuffs

• Disconnect power and your model's parts diagram for the correct handle location and hardware layout
• Protect the finish with painter's tape; align the handle and start both fasteners before tightening
• Use the proper driver (Allen/hex or Torx as required) and hand-tighten—do not overtighten
• Transfer any reusable mounting hardware from the original handle per your model's instructions

Color: Stainless

The Door Handle is an OEM part for Whirlpool microwaves. It is an external component consumers interact with frequently for opening and closing access to the microwave interior.

Causes of a bad door handle can include normal wear and tear affecting functionality over thousands of uses. Thin plastics or loose hardware holding the handle can deteriorate more quickly.

Symptoms of a bad door handle include:

• The handle no longer latches the door securely  
• Difficulty opening or closing the microwave door
• The handle coming loose or detaching completely
• Issues using locking/unlocking mechanisms

This OEM replacement Whirlpool door handle ensures smooth, dependable performance for the lifespan of the microwave. Its sturdy construction and precise fit maintain usability. This OEM part is also compatible with Maytag, Roper, Jenn-Air, Admiral, KitchenAid, and Frigidaire microwaves.
 

A white replacement door handle that restores a usable grip and appearance to your appliance door. Ideal when the original handle is cracked, loose, or missing so the door can be opened and closed reliably. What it does:

• Provides a secure grip for opening and closing the appliance door.
• Replaces cracked, broken, loose or missing handles that make the door difficult to operate.
• Matches original mounting points for a direct-fit replacement.
• Restores the door's finished appearance and basic function.

• Disconnect power (and water, if applicable) before beginning any repair.
• Access the handle mounting screws by opening/removing the door panel per the OEM service instructions.
• Use basic hand tools and retain all original fasteners and trim for reassembly.

Color: Stainless

This genuine-style refrigerator door handle provides a secure grip for opening and closing the fridge while restoring a finished look. Durable replacement for a damaged, cracked or missing handle to help maintain normal door operation and appearance. What it does:

• Replaces a broken, cracked or missing refrigerator door handle
• Restores proper pulling surface so the door opens and closes easily
• Helps keep the door sealed by enabling correct operation of the latch and hinge area
• Matches OEM fit and mounting points for a straightforward replacement

• Turn off power to the appliance or disconnect power supply before servicing
• Remove any trim or end caps to access mounting screws; a Phillips screwdriver or nut driver is commonly needed
• Handle screws may be hidden under cosmetic covers—retain all fasteners and trim pieces during disassembly