Whirlpool Handle

Color: Black

Color: Stainless   Note: Comes with Allen wrench, spare set screw, and instructions.

This Whirlpool Dishwasher Handle is an OEM part compatible with various Whirlpool dishwasher models. As a crucial component for the user interface of the dishwasher, this handle ensures effortless opening and closing of the appliance. 

The deterioration of dishwasher handles typically stems from regular wear and tear. Frequent usage, accidental impacts, or environmental factors can contribute to the handle becoming loose, misaligned, or entirely broken. 

Symptoms of a malfunctioning dishwasher handle include:

• Resistance or difficulty in opening or closing the dishwasher door.
• The handle feels loose or unstable.
• Visible cracks or damages on the handle.
• The door does not seal correctly, leading to potential leaks.

This genuine Whirlpool OEM replacement part is also compatible with Maytag, Jenn-Air, and some Kenmore models
 

This freezer door handle restores a secure, comfortable grip on your refrigerator's freezer door. Replace it when the original is cracked, loose, or missing to maintain safe operation, clean appearance, and easy everyday access.

• Provides the handhold used to open and close the freezer door
• Attaches to the door's existing mounting points/fasteners for a secure fit
• Helps resolve issues such as a broken, cracked, or wobbly handle
• Can improve ease of opening if the old handle has failed

• Disconnect power before servicing; wear cut-resistant gloves
• Support the old handle, then loosen/remove its fasteners; note their placement
• Position the new handle on the existing mounts and tighten fasteners evenly
• Do not overtighten; verify alignment and that the handle is secure

Color: Stainless

Color: Pewter

This door handle provides a sturdy, comfortable grip for opening and closing the appliance. Replace a cracked, loose, or missing handle to restore safe operation and refresh the appearance of your kitchen or laundry equipment.

• Provides the handhold needed to open and close the appliance door or drawer
• Transfers pulling force to the door without stressing the latch or hinges
• Restores usability and appearance when the original handle is damaged or worn
• Common symptoms: cracked or broken handle, looseness, missing handle, difficulty opening the door

• Disconnect power before servicing; allow hot surfaces to cool if applicable
• Protect surrounding finishes; support the door or drawer to reduce strain while removing/installing the handle
• Refer to your model's parts diagram for fastener type and location; reuse model-specific screws/caps if applicable
• Align the handle and tighten fasteners evenly—do not overtighten

Color: Stainless

The Handle is an OEM component specifically designed for Whirlpool refrigerators. It provides easy access and convenient opening of the refrigerator door.

Symptoms of a bad handle include: 

• Difficulty or instability when opening the refrigerator door
• Looseness, wobbling or detachment from the door 
• Cracks or breaks that compromise safety and function

Causes can include normal wear and tear over prolonged use, excessive force, or damage from falls or impact. 

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Color: Stainless
The Handle is an OEM part for Whirlpool refrigerators. This handle attaches to refrigerator doors, allowing for intuitive opening and closing.

Causes of a bad handle can include wear from frequent use over multiple years, damage from excessive force or impacts, or deterioration of mounting brackets and fasteners.

Symptoms of an issue with the handle include:

• Loose, unstable or wobbly handle movement
• Difficulty opening/closing the refrigerator door
• Discomfort gripping the handle during use
• Visible cracks, breaks or detachment from the door

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This handle end cap secures the end of a door handle to the appliance door, covering the mounting point for a finished look. Replace a cracked or missing cap to restore a tight, clean handle attachment.

• Holds the handle to the door and conceals the fastener
• Can help resolve a loose, wobbly, or misaligned handle
• Replaces a broken, cracked, or missing end cap
• Restores proper handle appearance and feel

• Disconnect power and, if applicable, shut off water before servicing
• Support the handle while removing old cap to prevent dropping
• Use the correct driver for set/retaining screws to avoid stripping
• Do not overtighten; align the handle and cap before final snugging

Color: White. For black order WPW10202217. For almond order 8522446. If your unable to use your old mounting screws order WP3196164.

The Handle-Door (stl) is an OEM replacement part for Whirlpool brand gas ranges. It is the stainless steel handle assembly attached to the oven doors. 

Causes of a bad door handle can include wear and tear from regular use over time, as well as damage from exposure to high oven temperatures or accidental impacts.

Symptoms of a bad door handle involve: 

• Looseness, lack of grip or difficulty opening/closing doors
• Cracking, separation or failure of the handle mounting  
• Discoloration, melting or warping of the handle surface
• Issues safely accessing the oven interior

This Whirlpool replacement part is also compatible with KitchenAid, Jenn-Air, and some Kenmore models.

This white oven door handle restores a secure, comfortable grip and a clean, factory look on your range. Replace a damaged or worn handle to bring back confident, everyday door operation.

• Provides a sturdy handhold to open and close the oven door
• Direct replacement for a cracked, loose, or missing handle
• Helps maintain safe, controlled door movement during use
• Refreshes the appliance's appearance with a color-matched white finish
• Common symptoms: handle broken, loose, missing, or discolored

• Disconnect power (and shut off gas, if applicable). Allow the oven to cool completely.
• Access the handle's mounting screws from the inner door; support the outer panel/glass while removing hardware.
• Note the original screw locations and orientation before removal; transfer any trim pieces specific to your model.
• Start screws by hand and do not overtighten to avoid damaging the door skins.

Color: Black. Used on some dryers and broiler drawers.

Color: Black

The Rotating Handle is an OEM part for Whirlpool mixers. It allows you to raise and lower the mixing bowl for convenient access during the mixing process.

A bad rotating handle can be caused by regular use, accidental damage, or excessive force applied during operation. If you notice cracks, a loose or wobbly fit, or difficulty in rotating the handle smoothly, it may indicate a problem with the handle itself.

Symptoms of a bad rotating handle include:

• Cracked or damaged handle surface
• Loose or insecure fit of the handle on the mixer
• Inability to raise or lower the mixing bowl 

Replace your faulty handle with this genuine OEM part to restore your mixer. 

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.