Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Parts for Crosley CDG4205AWW: 01 - Base (Gas) Parts

Parts for Crosley CDG4205AWW: 01 - Base (Gas) Parts

Location on Diagram
Part Description
Price & Availability
1
Best Seller
Product photo
4.9 (541)
By: Whirlpool
Part Number: WP33002535

Replace your dryer drum belt if the drum won't turn or makes squealing noises. Essential for rotating the drum during drying cycles. Verify fit by model.

More
$27.37

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
2
Product photo
4.7 (3)
By: Whirlpool
Part Number: WPY015825

This is a metal clip that secures the drive motor in place within the dryer cabinet. It clamps around the motor housing to prevent movement during operation. Replace this clip if it is broken, missing, or bent, which can cause the motor to shift and create excessive vibration, rattling noises, or belt misalignment.

More
$14.41

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
3
Product photo
5.0 (1)
By: Whirlpool
Part Number: WPY313561

A single mounting screw designed to secure panels, brackets, or components on your appliance for reliable fit and reduced vibration. Use this genuine replacement when a fastener is missing, stripped, or rusted. What it does:

  • Fastens panels, trim, or mounting brackets to restore proper alignment
  • Helps eliminate rattling or vibration caused by loose or missing screws
  • Replaces corroded or damaged hardware to maintain safe operation
  • Restores secure attachment for parts that no longer hold in place
What's included: One mounting screw Install notes:
  • Disconnect power to the appliance before starting any repair
  • Use the correct driver bit to avoid stripping the screw head
  • Tighten until snug; avoid overtightening which can strip threads or damage parts

More
$9.07

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
4
Best Seller
Product photo
4.9 (12)
By: Whirlpool
Part Number: WP33002795

This genuine replacement part is a drive motor for dryers. The drive motor is the main engine that allows the dryer drum to rotate. If the drum is no longer spinning properly, the drive motor might need to be replaced. Luckily this is a relatively simple process.To replace the drive motor, begin by unplugging the dryer. Once it is powered off, uninstall the front panel of the dryer by removing the screws that attach it. After that, lift the top panel above the drum so that it is vertical and no longer covering the drum. Then disconnect the wires from the moisture sensors with a screwdriver by pressing down on the locking tab. Once the wires have been removed, lift the drum out from the dryer to gain access to the drive motor. Using a socket wrench, remove the blower wheel from the motor assembly. Then remove the old drive motor by unthreading the mounting screws that attach it. Install the new drive motor and reassemble the dryer. This OEM replacement part is sold individually and is compatible with Whirlpools, Maytag, Kitchenaid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Sears/Kenmore brand dryers.

More
$177.66

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
5
Best Seller
Product photo
4.9 (69)
By: Whirlpool
Part Number: WP6-3705180

Pivoting bracket arm that suspends the idler pulley and routes the drive belt in your dryer. Replace if cracked, bent, or worn to restore proper operation.

More
$55.30

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
6
Best Seller
Product photo
4.7 (40)
By: Whirlpool
Part Number: WP315772

Protects the idler arm and ensures smooth belt tension operation in your dryer. Replace if you hear grinding noises or notice excessive arm movement.

More
$11.78

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
7
Best Seller
Product photo
4.6 (13)
By: Whirlpool
Part Number: WPY014874

Factory fastener screw secures panels, brackets, and trim inside appliances. Replace missing, stripped, or damaged screws to restore tight fit.

More
$7.56

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
8
Best Seller
Product photo
4.9 (357)
By: Whirlpool
Part Number: WP6-3700340

Replaces the belt tension pulley that maintains proper belt alignment in your dryer. Needed when pulley is squealing, cracked, or worn out.

More
$19.31

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
9
Best Seller
Product photo
4.7 (48)
By: Whirlpool
Part Number: WP354987

The Idler Shaft Retaining Ring is an OEM replacement part for Whirlpool dryers. Also called an "E" ring, it is a sealing gasket positioned between the front and rear housing omponents. Maintaining an airtight seal prevents gas leakage and promotes efficient drying performance.  

Causes of a bad retaining ring commonly involve compression loss of the rubber gasket material over many years of heating cycles. Exposure to petroleum-based cleaners may prematurely deteriorate the seal as well.

Symptoms of a failed 'E' ring include: 

  • Gas leaks emitting foul odors around seams or vents   
  • Reduced heat conductivity hampering dryer functioning
  • Moisture accumulation shortens fabric lifespan  
  •  Drafts compromising indoor air quality and energy bills

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore gas dryer models. 

More
$12.95

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
10
Best Seller
Product photo
4.8 (113)
By: Whirlpool
Part Number: WPY312527

Fiber washer that maintains idler pulley alignment and belt tension in your dryer. Replace if squeaking, grinding, or pulley wobbles occur.

More
$12.95

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
11
By: Whirlpool
Part Number: 33002218
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

12
Best Seller
Product photo
4.9 (26)
By: Whirlpool
Part Number: 33002459

Maintains tension on the idler arm to keep your dryer belt tight. Replace if the spring is stretched, broken, or missing to restore proper belt operation.

More
$5.95

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
13
By: Whirlpool
Part Number: 33003039
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

13
By: Whirlpool
Part Number: 33002952
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

14
Product photo
5.0 (3)
By: Whirlpool
Part Number: WP33002797

Dryer making loud noise or won't dry? A cracked or loose blower wheel often causes poor airflow. Moderate DIY repair, 1-2 hours with basic tools.

More
$84.95

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
15
Product photo
By: Whirlpool
Part Number: WP489128

Screw: 8-16 x 3/8 inch.

More
$9.05

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
16
Product photo
5.0 (1)
By: Whirlpool
Part Number: WP1163839

Specs: 10 - 16 x .375

More
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

17
Product photo
By: Whirlpool
Part Number: 33001800
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

18
By: Whirlpool
Part Number: Y312890
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

19
By: Whirlpool
Part Number: Y303841
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

20
By: Whirlpool
Part Number: 33001835
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

21
Best Seller
Product photo
4.9 (247)
By: Whirlpool
Part Number: WP338906

The Flame Sensor is an OEM replacement part for Whirlpool gas dryers. This component plays a critical safety role by monitoring the presence of the gas burner flame during the drying cycle.

Causes of needing to replace the flame sensor can include normal wear and tear over extended use, exposure to high temperatures or corrosion, or physical damage to the sensor itself.

Symptoms that may indicate a faulty flame sensor include:

  • The dryer not heating or producing heat properly
  • Error codes related to the gas system or ignition failure
  • The dryer shutting off unexpectedly during cycles

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore gas dryer models. 

More
$35.95

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
22
Best Seller
Product photo
4.9 (40)
By: Whirlpool
Part Number: WP303395

Dryer won't heat or overheats? High limit thermostat prevents overheating by shutting off heat at high temps. Easy DIY repair with video guide.

More
$38.95

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
23
Product photo
5.0 (1)
By: Whirlpool
Part Number: WP33001789

This dryer blower housing encloses the blower wheel and directs air from the drum through the lint filter to the exhaust vent. Replacing a damaged housing restores proper airflow for consistent drying and helps keep lint contained within the airflow path.

  • Encloses and supports the blower wheel while channeling air from the drum to the exhaust
  • Maintains correct airflow and back pressure for efficient drying performance
  • Replace if the housing is cracked, warped, melted, or otherwise damaged
  • Typical symptoms include weak vent airflow, longer dry times, rattling or scraping from the blower area, or visible lint leakage
What's included: 1 blower housing Install notes:
  • Disconnect power; if gas, also shut off the gas supply
  • Access the blower area by removing the lower/front panel and lint ducting as required by your model
  • Transfer the blower wheel and any brackets from the old housing; clean lint from ducts before reassembly
  • Ensure the housing seats fully and all duct connections are tight; spin the blower by hand to verify clearance before restoring power

More
$78.71

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
24
By: Whirlpool
Part Number: 33002932
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

25
Product photo
4.9 (15)
By: Whirlpool
Part Number: WP33002793

Dryer won't heat or flame cycles on and off? A warped burner assembly prevents reliable ignition. Moderate DIY repair restores even drying.

More
$109.41

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
26
Product photo
By: Whirlpool
Part Number: 304971
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

27
By: Whirlpool
Part Number: 33001702
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

28
Product photo
5.0 (1)
By: Whirlpool
Part Number: 3406051
$54.25

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
29
By: Maytag
Part Number: 33001834
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

30
Product photo
5.0 (1)
By: Whirlpool
Part Number: WPY314137

The rubber foot is an OEM replacement part for Whirlpool washing machines. This small but essential component fits beneath the leveling legs, providing stability and preventing the appliance from moving or vibrating excessively during operation. It also protects flooring surfaces from potential scratches or damage.

Symptoms of a bad Leveling Leg Pad include:

  • Increased vibration or noise during the wash or spin cycle
  • The washing machine wobbling or becoming unsteady
  • Visible wear, cracks, or damage to the pad

Causes of a failing Leveling Leg Pad can include wear and tear from prolonged use, exposure to moisture, or excessive weight causing deformation. Replacing worn pads helps maintain the appliance's balance and efficiency.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

For the leveling leg order W10176519.

More
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

31
Product photo
By: Whirlpool
Part Number: 33002157
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

32
By: Whirlpool
Part Number: 33002465
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

33
Product photo
By: Whirlpool
Part Number: 210932
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

34
Product photo
5.0 (1)
By: Whirlpool
Part Number: WP22002239
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

35
Product photo
5.0 (1)
By: Whirlpool
Part Number: W10176519

Adjustable leveling feet that restore stability and balance to your appliance by letting you fine-tune height at each corner for a flat, wobble-free install—helps reduce vibration and improve door fit and operation. What it does:

  • Provides adjustable height to level an appliance on uneven floors.
  • Eliminates rocking or wobbling that can cause vibration, noise or movement during operation.
  • Helps ensure doors and panels sit flush and seal properly.
  • Durable replacement designed for direct fit where the OEM leveling foot is specified.
What's included: One replacement leveling foot. Install notes:
  • Disconnect power and water before performing any work.
  • Support the appliance so it cannot tip—use a jack or have a helper hold it while you adjust feet.
  • Turn the foot to raise or lower the corner; use hand tools as needed and avoid excessive force.
  • After adjusting, check stability and run a short cycle to ensure vibration and alignment are resolved.

More
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

36
Product photo
By: Whirlpool
Part Number: 22002244
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

37
By: Whirlpool
Part Number: 410490
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

38
Best Seller
Product photo
4.8 (31)
By: Whirlpool
Part Number: WP694674

The Cycling Thermostat is an OEM part for Whirlpool dryers. It regulates and monitors the temperature inside the dryer during the drying cycle. It ensures that the dryer doesn't overheat and prevents potential damage to clothes or the dryer itself.

Causes of a faulty cycling thermostat can include wear and tear over time, electrical issues, or sensor malfunction.

Symptoms of a bad cycling thermostat may include:

  • Clothes taking longer than usual to dry
  • Inconsistent drying results
  • Overheating or burning smell
  • The dryer not heating at all

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

More
$48.46

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
39
Product photo
5.0 (1)
By: Whirlpool
Part Number: WP33001789

This dryer blower housing encloses the blower wheel and directs air from the drum through the lint filter to the exhaust vent. Replacing a damaged housing restores proper airflow for consistent drying and helps keep lint contained within the airflow path.

  • Encloses and supports the blower wheel while channeling air from the drum to the exhaust
  • Maintains correct airflow and back pressure for efficient drying performance
  • Replace if the housing is cracked, warped, melted, or otherwise damaged
  • Typical symptoms include weak vent airflow, longer dry times, rattling or scraping from the blower area, or visible lint leakage
What's included: 1 blower housing Install notes:
  • Disconnect power; if gas, also shut off the gas supply
  • Access the blower area by removing the lower/front panel and lint ducting as required by your model
  • Transfer the blower wheel and any brackets from the old housing; clean lint from ducts before reassembly
  • Ensure the housing seats fully and all duct connections are tight; spin the blower by hand to verify clearance before restoring power

More
$78.71

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
40
Best Seller
Product photo
5.0 (30)
By: Whirlpool
Part Number: WP33001762

Dryer won't start or run? A blown thermal fuse is the likely cause. This safety component cuts power if temperatures get too high. Easy 15-min fix.

More
$48.46

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
41
Product photo
By: Whirlpool
Part Number: 307208
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

42
Product photo
5.0 (1)
By: Whirlpool
Part Number: WP1163839

Specs: 10 - 16 x .375

More
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

43
By: Whirlpool
Part Number: 33002711
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

44
Product photo
5.0 (4)
By: Whirlpool
Part Number: WP33002917

Specs: No.8X1/2 HEX WASHER HEAD

More
$7.56

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
45
Product photo
By: Whirlpool
Part Number: WP33002461
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

46
Best Seller
Product photo
4.9 (16)
By: Whirlpool
Part Number: WP306176

Dryer not heating or flame goes out after a minute? This gas valve with coils restores heat. 15-minute repair with video guidance available.

More
$234.95

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
47
Product photo
By: Whirlpool
Part Number: 33001735
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

47
By: Whirlpool
Part Number: 33003029
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

48
Best Seller
Product photo
4.6 (8)
By: Whirlpool
Part Number: WP90767

The Whirlpool screw is an OEM replacement part responsible for securing various components or parts on different types of Whirlpool appliances. The screw is designed to provide a secure and reliable fastening connection, ensuring that different parts of the appliance stay in place. It is commonly used in different locations within the appliance, such as the cabinet, panels, or other structural elements.

This part fixes the following symptoms:

  • Loose or wobbly components within the appliance
  • Panels or parts that are not securely attached
  • Rattling or unusual noises due to loose parts
  • Damaged or missing screw

The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

More
$7.56

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
49
Best Seller
Product photo
4.6 (8)
By: Whirlpool
Part Number: WP90767

The Whirlpool screw is an OEM replacement part responsible for securing various components or parts on different types of Whirlpool appliances. The screw is designed to provide a secure and reliable fastening connection, ensuring that different parts of the appliance stay in place. It is commonly used in different locations within the appliance, such as the cabinet, panels, or other structural elements.

This part fixes the following symptoms:

  • Loose or wobbly components within the appliance
  • Panels or parts that are not securely attached
  • Rattling or unusual noises due to loose parts
  • Damaged or missing screw

The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

More
$7.56

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
50
Product photo
By: Whirlpool
Part Number: WP902577
$46.22

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
51
Product photo
By: Whirlpool
Part Number: 33002817
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google