Bosch Parts

The old fascia had broken and been torn off. I should have saved the buttons from it, but I didn't know that I'd be repairing it - I figured I would have to replace the unit. Well, money is tight, so I got the model number from the unit and looked up parts online. I couldn't find the exact model number on this site, but the picture of the fascia looked just like the picture in my manual, so I bought it, a handle strip, and a new set of buttons. I pulled the stainless panel off the front, then... Read more

Dishwasher made a humming sound but no water was circulating around. Searching around, I decided that it was either the inlet valve or the pump/impeller. I started with the inlet valve since it’s an easier repair. It didn’t work, no problem, now I have a spare. I then changed the pump and motor assembly. When I got the old one out, the impeller was broken along with a crack in the plastic housing. The repair took about 3 hours following along with the video. The dishwasher now works like... Read more

Purchased seals from appliance parts pros and watched videos to replace. The website and videos made the install a breeze. I am a huge fan of your website and videos. I have used them for years to fix all sorts of home appliances. Read more

Ordered replacement parts from AP diagram Read more

I've never repaired an appliance before, but wanted to try to at least diagnose the problem before calling a professional. I started with Google searches to explain why water wasn't going in. First checked the water supply and verified it was OK. The next most likely problem was the inlet valve. I watched a bunch of YouTube videos on how to replace this part, decided I should be able to do it myself, and found that the part was under $30. To test my ability, I removed the existing part &... Read more

Simple snap in replacement. Read more

My husband replaced the inlet valve and it no longer leaks! Read more

After having seen the video I installed the new lid and it worked. Read more

Easily installed the side mounts and put new trim around the opening. Read more

Bought a Thermador PRSE48" dual fuel range from Craigslist really cheap because it didn't work. Did a little research and decided to overhaul most of the top (gas) end. For what I paid for it it was worth it and I'd have a good stove with new components. Replaced the griddle thermostat, ignition micro switches, ignition re-igniter box, installed fixing kit with 2 new potentiometers, both solenoids, and gas regulator. Had to replace 2 gas lines, all 4 jets, and one brass nut that were... Read more

Pretty easy fix with replacement part from AppliancePartsPros -- but there's a catch: The eight control buttons, not the on/off button, all look alike, but they need to be installed in a certain order for them to work once you install the panel. No instructions for this and the repair video (by the tech Simon) does NOT make this clear. It took a lot of time and repeated installations to figure this out. The buttons, which can be from the old part, need to be installed according to the letters... Read more

Replaced the two parts. Read more

I wanted to only mess with the washer in a single 30-minute session. So, I assumed both solenoid valves were leaking and purchased replacements. It was a simple project, as well as a good chance for my 13-year-old son to accomplish something practical. Steps/tools used, in order: STEP/TOOL 1: Pull the washer electrical plug from the wall; no tools needed. STEP/TOOL 2: Shut off the hot and cold supply hose valves in the wall; no tools needed. STEP/TOOL 3: Unscrew the hot and cold water female... Read more

After 8 years of yanking to open our Bosch dishwasher (SHE45M06UC/50 model #) the plastic front panel cover started to break off (one of the tabs on the left side broke off). The shipping was super-fast, so got the part within 2 business days. Just need to remove the lower Torx screws (3 on each side) which hold the lower front panel to the dishwasher to get access to the screws holding on the control panel, swap the buttons and silver handle, and replace. Read more

A part was missing from a dishwasher purchased from a company that was going out of business. When the electrician tried to install it, he found that it was missing a critical, proprietary part that connected the power to the unit. The part did not appear on any diagrams provided with the machine. I contacted Appliance Parts Pros. They found an obscure diagram that showed the part, identified the part, and tracked it down for me. The part was priced reasonably and shipped quickly. Highly... Read more

• overflowing
• Will not fill with water

I checked continuity at the float switch since I knew the inlet valve was working when direct wired to 120v. Switch did not have continuity. Replaced switch and inlet valve worked at start of cycle. Read more