Craftsman Spring Parts

Detent shaft spring for lawn tractors and tillers. Replaces worn, broken, or missing springs. Installs on the shift mechanism shaft assembly.

Governor spring for small engines on mowers, tillers, and outdoor power equipment. Connects to throttle linkage. Replace if stretched, broken, or missing.

Replacement torsion spring for lawn and garden equipment engines. Creates tension between levers and components. Replace if broken, overstretched, or distorted.

Extension spring for snow blowers and snow throwers. Replaces cracked, broken, or missing springs. Essential structural component for proper operation.

Recoil spring for chainsaw starter mechanism. Applies tension to pulley for rope retraction. Replace if worn, rusted, broken, or damaged to restore operation.

Internal spring for walk-behind lawn mowers. Secures various components while allowing flexibility. Replace if stretched, broken, or no longer holds tension.

This extension spring attaches to the axle support bracket and the drive belt idler pulley on many types of lawn and garden equipment. It creates additional tension to the drive belt idler pulley. Sometimes the extension spring can be stretched out or may break, often caused through excess use. If this is the case, the spring will need to be replaced.If the spring is broken or no longer creates the appropriate amount of tension, replacement is required. It is an easy process that only requires a set of pliers. The pliers can be used to take the old spring off of the yard equipment before attaching the new extension spring. Make sure the equipment is on a stable surface and powered off when working with it. Remove the spark plug wire to prevent accidents.This extension spring is an authentic OEM replacement part sourced directly from the manufacturer. It is sold as an individual component. The spring is made to be used with lawnmowers, lawn tractors, and tillers created by MasterCut, Yard-Man, Bolens, Huskee, MTD, Yard Machines, Murray, Troy-Bilt, Cub Cadet, and Craftsman.

An authentic OEM replacement extension spring is an integral part of a lawn tractor or snowblowers brake system that helps to hold together and redistribute energy throughout the lower deck. When a driver applies the brakes, the lower deck has a tendency to continue moving forward with inertia. This extension spring helps to keep the parts in place and transfer a balance of energy. Although replacing the extension spring itself is a simple and straightforward process, gaining access to the spring is a little complicated as it requires removing the lawn mower or snowblower's lower deck. You will need a pair of pliers to remove the pins and cables that hold the lower deck in place but there is no other required hardware. Be sure to follow the user's manual as you remove the deck. This part is a top-quality replacement part sourced from its original manufacturer. It is designed to be used with Murray, Husky, Troy-Bilt Poulan, Yard Man, Yard Machines, Bolens, and MTD appliances. This part ships individually.

Returns the handguard to forward position on chainsaws. Replace if broken, damaged, or handguard no longer springs back when released. Restores safety.

Replacement spring for chainsaw ignition switches. Installs inside the switch assembly. Needed when original spring is broken, worn, or missing.

Torsion spring for walk-behind lawn mowers. Mounts to chassis to maintain spring tension and store mechanical energy. Replace if broken or damaged.

Deck drive spring for riding mowers and tractors. Replaces cracked, broken, or worn springs on mower deck drive systems. Direct fit installation.

This is a spring that is used on many Husqvarna lawnmowers. The component is located in the middle of the retainer and at the drive disk on the rear-wheel drive system. The main purpose of the spring is to ensure proper tension is applied between the drive disk and the pinion gear. Through time or wear and tear, this spring can become damaged or break. If this occurs, the component will need to be replaced in order to use the lawnmower.A screwdriver, socket set, and work gloves will be needed to replace this part. Make sure the lawnmower is powered off and the spark plug has been removed. Take the lawnmower and place it on a solid and sturdy surface while working on it. Remove the wheel where the spring is broken and take out the pinion, pawl, and spring. All of these items can be replaced or the pawl and pinion can be reused with the new spring.This spring is made for several lawnmowers manufactured by Husqvarna. The component is sold on an individual basis. This is a genuine OEM replacement part that is sourced directly from the manufacturer.

Torsion spring for riding mowers and tractors. Provides tension and torque to internal components. Replace if damaged, broken, or missing.

Vibration-dampening spring assembly that installs between the engine and handle. Replace if springs are broken, worn, or missing to restore proper isolation.