Dishrack

Right-hand adjuster assembly for dishwasher upper rack height adjustment. Replace if broken, cracked, or missing to restore proper rack positioning.

Secures tine rows to the dishwasher rack assembly. Replace broken, cracked, or missing clips that no longer hold tines firmly in place. Snaps on easily.

Replacement silverware basket for dishwasher. Installs on lower rack to hold utensils. Needed when original is cracked, broken, or has holes in bottom.

The Lower Dishrack is an OEM part for Whirlpool dishwashers. It provides space for arranging and securely holding your dishes during the dishwashing cycle.

A bad lower dishwasher dishrack can be caused by regular wear and tear, exposure to hot water and cleaning agents, or accidental damage. If you notice rusting, chipping, or broken tines on the dishrack, it may indicate a problem with the rack itself.

Symptoms of a bad lower dishwasher dishrack include:

• Rust stains or residue on your dishes after a wash cycle
• Difficulty in loading or unloading dishes 
• Unstable or wobbling dishes during the wash cycle
• Limited space or reduced capacity for dishes

Replace your faulty lower dishwasher dishrack with this genuine OEM part to restore your dishwasher. 

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

Keep utensils organized and secure during the wash. This dishwasher silverware basket replaces a cracked or missing basket so flatware stays upright for thorough cleaning, helps prevent small items from slipping through the rack, and streamlines loading. What it does:

• Holds silverware and small utensils in the rack throughout wash and rinse cycles
• Keeps pieces separated and upright to improve cleaning and drying performance
• Helps prevent loose items from contacting the spray arm or falling to the tub bottom
• Replace if the basket is cracked, warped, or missing sections, or if utensils tip over or come out dirty

• 1 silverware basket

• No tools required: slide out the rack, lift out the old basket, and set the new basket in the same location
• Ensure the basket is seated securely and does not interfere with spray-arm rotation
• Load knives and sharp items with points down; avoid nesting spoons for best results

Secures tines in your dishwasher rack to hold dishes and utensils in place. Replace if cracked, broken, or missing to restore proper rack function.

Gray protective caps cover damaged or rusting dishwasher rack tine tips. 125-pack slides over worn tine ends to restore your dishrack and protect dishes.

Complete lower dishrack assembly that slides on tub rails. Holds plates, bowls, and cookware. Replace when original rack is rusted, cracked, or damaged.

Prevents the upper dishrack from sliding out too far during use. Installs at the front of the dishrack track. Replace if broken, cracked, or missing.

Secures tines in your dishwasher rack to keep dishes properly aligned. Replace this clip if it's cracked, broken, or missing to restore rack stability.

Grey vinyl touch-up paint for repairing chipped, rusted, or damaged dishwasher rack coating. 4oz bottle with brush. Restores protective coating.

Secures adjustable tines in the upper or lower dishrack. Replace if clip is broken, cracked, or missing to keep tines upright and stable for dishes.

Right-hand adjuster housing for dishwasher upper rack height adjustment. Replace broken, cracked, or missing housing with release lever mechanism.

This small clip secures the guard/shield on the dispenser assembly. Replacing a cracked or missing clip keeps the guard firmly attached and aligned so the dispenser operates properly without interference, noise, or premature product loss. What it does:

• Fastens the dispenser guard to its mounting point on the dispenser assembly
• Keeps the guard aligned to prevent interference with dispenser door/flow
• Restores a secure fit if the original clip is cracked, deformed, or missing
• Common symptoms: loose or missing guard, rattling, incomplete dispensing or residue left after a cycle

• 1 dispenser guard clip

• Disconnect power to the appliance; turn off water supply if applicable
• Open access, support the guard, and release the worn clip from its tabs
• Snap the new clip fully into place, ensuring it engages all locking points
• Ensure the guard is secure and that the dispenser door/flow path is unobstructed before use

The Dishrack Track (Right) is an OEM part for Whirlpool dishwashers. It is responsible for supporting the third-level dishrack and allowing it to glide in and out smoothly during the loading and unloading process. This track is designed specifically for the right side of the third-level rack. 

Causes of a bad track include damage from heavy use over time, such as dulling or bending of the metal track surface from repeated loading/unloading of dishes. Debris or residue buildup along the track can also cause issues.

Symptoms of a bad track include:  

• Rack that will not fully extend or retract
• Binding or sticking during rack movement  
• Rack that will not stay positioned above

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Color: White. 4oz bottle with brush used for touching up damage to your dishracks. For blue use W10840471. For grey use WP676455. For tips use 675679