Need Help?
Call
Replacement plate holder clip assembly that secures the appliance's glass plate or tray to the drive hub, helping restore stable, even rotation and reduce wobble or slipping during use. What it does:
Dark gray cap that covers the tip of dishwasher dishrack tines. Replace if your existing tine cap is cracked, broken, missing, or worn to protect dishes.
Secures hoses, wires, or small assemblies to the dishwasher frame. Replace if cracked, broken, or missing to prevent movement, reduce noise, and keep parts aligned.
Color: gray. Measures about 1 inch high by 4 inches deep.
I bought a new controller first and installed it. The exact replacement controller was no longer available and I had to modify two AC connectors that changed from 3 pins with two wires to two pins with two wires. This was not expected but I made it work just fine by getting the three pin connectors on the cable to fit the two pin by breaking out the center web in the board two pin and then shaving off the raised key plastic on the wires. Then on power up, I found that the wash motor did not... Read more
Small retaining clip that secures trim, panels, or components in your dishwasher to prevent rattling or detachment. Replaces broken or missing clips.
Replacement door hinge adjuster for dishwashers. Restores proper door alignment and smooth closing action. Needed when adjuster is broken or worn.
Replaces all the parts on my order invoice. Upper rack is back to normal operation Read more
Dishwasher bag hugger assembly installs on upper rack to secure lightweight items during wash cycles. Replace if broken, cracked, or missing.
Replaced the rack. Had to take some of the old parts that were still good and snap them into place.. pretty easy. Read more
Lower dishrack assembly for dishwasher bottom level. Holds plates, pots, and pans during wash cycles. Replace if rusted, cracked, or tines broken.
Replaced the upper and lower racks. AppliancePartsPro shipped the racks fast and they are a perfect fit. I think they're even a better, stronger design then the factory originals. Read more
Replacement silverware basket for your dishwasher. Installs in lower rack to hold utensils during wash cycles. Replaces broken, cracked, or worn baskets.
The lower basket L& R track bearing brackets on my KitchenAid dishwasher (KDTE704DSSO) finally gave out (ball bearings everywhere) after (6) years of daily, family use. The service techs provided me with all the information I needed to successfully and quickly complete my project. My parts were mailed to me very quickly and my dishwasher was up and running in short order. The parts were clean and in perfect working condition. (After pulling your dishwasher out, there are two sets of screws on... Read more
NOTE: Wheels are no longer included with this part.
Replaces a rusty, cracked, or damaged dishwasher upper rack. Restores smooth gliding and secure loading for cups and bowls on the top level.
Watched video when I ordered product and it was easy. Buy the way, your product is the most reasonably priced online ! WILL use you again. Saved you in my computer under favorites. Read more
Replacement lower dishrack for dishwasher bottom level. Restores dish organization when original rack is rusted, cracked, or falling apart. Includes tines.
Ordered replacements Read more
Lower rack roller and stud assembly supports smooth gliding of your dishwasher's bottom rack. Replace if roller is worn, cracked, or missing.
Ordered new roller w/stud assembly Read more
The Dishrack Stop Clip is an OEM component specifically designed for Whirlpool brand dishwashers. This clip functions to hold the upper dish rack in place during washing cycles.
Symptoms of a bad dishrack stop clip can include:
Causes of a bad dishrack stop clip usually stem from normal wear and tear over extended use. Overtight loading of dishes could also put excessive stress on the clip.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.
Ordered exact part & installed Read more
Dishrack track rail for dishwashers. Mounts inside tub to guide rack smoothly in and out. Replace if cracked, broken, or causing rack misalignment.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.