Electrolux Drawer, Shelf, Pan

Replace worn or broken freezer drawer slide rails. Restores smooth gliding and proper alignment. Includes left and right side guides for bottom-mount units.

This replacement door bin mounts on the inside of your refrigerator door to hold bottles, jars, and condiments. Replacing a cracked or loose bin restores safe, usable storage and helps keep items organized and accessible.

• Provides storage on the door to keep bottles and jars upright
• Restores capacity when the original bin is cracked, warped, or missing
• Helps prevent items from tipping or falling when the door opens/closes
• Common symptoms: bin falls off, won't stay seated, or has broken tabs/cracks

What's included: 1 door bin Install notes:

• Remove all items from the old bin; lift straight up to release from the door slots
• Align the new bin's tabs with the slots and press down until fully seated
• Do not force; re-align if resistance is felt to avoid damaging the door liner
• Place in the correct door position for your model; some bins aren't interchangeable between levels

Guide rail that supports and directs refrigerator drawers along their track. Replace when original is worn, cracked, or broken to restore smooth sliding.

Glass shelf for side-by-side refrigerators. Provides durable storage surface inside fresh food compartment. Replace if cracked, broken, or missing.

Replacement ice cream shelf that mounts above the ice bucket in your refrigerator. Replace if cracked, broken, or missing after an ice maker upgrade.

Mounts freezer baskets to the interior freezer wall for organized storage. Replace if cracked, broken, or missing to restore proper basket support.

This bin door is the hinged cover for a door storage bin. It restores a secure flip-down barrier that keeps items contained and helps prevent spills when you open or close the appliance door.

• Provides a flip-down cover for a door bin to retain items securely
• Pivots on side hinge points for easy access to contents
• Replaces cracked, warped, or missing covers that won't stay in place
• Common symptoms include broken tabs, loose fit, or items falling during door movement

• Disconnect power and empty the affected bin before starting
• Release the old cover from its side hinges/tabs; note orientation for reassembly
• Allow the new cover to reach room temperature; align with hinge points and snap into place without forcing
• Open and close the cover to confirm smooth pivot and secure engagement

Replacement drawer slide for freezers. Restores smooth gliding when original is broken, worn, or causes sticking. Essential for proper drawer alignment.

This replacement cover restores a clean, finished look and protects internal components inside your refrigerator. Replace a broken or missing cover to keep parts secured and the compartment properly enclosed for dependable everyday use.

• Conceals and protects internal components or hardware in the designated area
• Restores a secure, finished enclosure over the section it covers
• Common failure signs: cracked, warped, or missing cover
• Won't snap or stay in place; loose or rattling piece
• Exposed screws/hardware or items snagging on the opening

• Unplug the refrigerator before servicing
• Clear food items/shelves as needed to access the cover
• Release retaining tabs or remove mounting screws; transfer any reusable hardware
• Align and snap or fasten the new cover; verify secure fit before restoring power

Door bin mounts to the refrigerator door to hold bottles, jars, and condiments. Replace a cracked, broken, or missing bin to restore secure storage.

Replace a broken, bowed, or missing freezer shelf. Provides a sturdy, level surface for organizing food and keeping containers stable in the freezer.

Supports the crisper shelf glass and forms the top of humidity drawers. Replace if cracked, warped, or broken from heavy loads or impact.

This slide set replaces the right- and left-hand rails that guide and support a drawer or rack. It restores smooth, aligned movement so the assembly opens and closes easily without sticking, wobbling, or jumping off the track.

• Guides and stabilizes the drawer/rack on both sides for smooth travel
• Maintains alignment to reduce binding, uneven movement, and premature wear
• Replaces worn, bent, or broken slides that affect operation
• Common symptoms: sticking, rough/grinding movement, tilt or sag, popping off track, hard to open/close

• Disconnect power; shut off gas/water. Remove the drawer or rack before servicing.
• Note L/R orientation; remove old slides and reuse existing screws/brackets.
• Install new slides in the same positions; ensure they are fully seated and aligned.
• Test movement several times before returning the appliance to service; wear cut-resistant gloves.

The Drawer Glide Gear is an OEM replacement part for Frigidaire refrigerators. It is a metal component located on each side of wire shelf tracks that work together to make shelf and drawer movements smooth. 

Causes of bad glide gears can include wear from years of extended usage, dents or deformation that restrict proper motion, or failure of lubricating parts inside the gear mechanism.

Symptoms of a bad Drawer Glide Gear include:

• Shelves or drawers that stick or fail to slide freely
• Noisy squeaking or grinding noises coming from shelf areas  
• Shelves difficult to properly align or position as needed

As a high-stress moving part, glide gears can degrade and lead to slothful storage access over time. Replace with this genuine OEM component for optimally smooth shelf performance on your Frigidaire refrigerator. The replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Restores smooth drawer movement in your refrigerator. Replace worn, cracked, or broken slide assembly when drawer sticks, sags, or loses alignment.

Small mounting bracket that holds shelves or baskets inside your freezer. Replace if cracked, broken, or missing to restore secure, level positioning.