Need Help?
Call
This factory 8-18 screw secures appliance panels, brackets, and components. Replace missing or stripped hardware to restore a tight, rattle-free assembly and dependable operation.
It was easy to find the part on appliance parts pros. Once I found it I studied the diagram and determined that there were 3 screws in the drum that needed to be removed. I disconnected power and then removed 3 interior screws. Once I did that I removed the back cover and removed the single screw on the bottom side of the air duct that held it in place connected to the heat tube. I then reversed disassembly. I want to tell you this is a 2 person job. In order to assemble it you need to... Read more
This refrigerator door gasket seals the fresh food compartment to keep cold air in and warm air out. A tight, pliable seal helps maintain temperature, reduce frost and energy use, and prevent moisture around the door.
Replaced. Read more
This refrigerator door gasket creates an airtight seal around the door to keep cold air in and warm air out, helping maintain proper temperature and energy efficiency. Replacing a worn gasket restores a reliable seal and prevents frost or moisture issues.
It fit perfectly Read more
This evaporator fan motor dust cap is an authentic OEM replacement part found on refrigerator and freezer fan motors. This dust cap prevents the fan motor bearing and housing from being damaged by dirt and debris. If the dust cap is cracked or broken, the fan may make loud squealing noises. If the dust cap is not removed and replaced, the fan could stop working and ultimately cause the refrigerator's temperature to be affected. To start, disconnect the power and water to the refrigerator. Remove food from the freezer so that the back panel of the freezer can be accessed to reach the fan. Remove the ice maker and set it outside the freezer. Disconnect the fan and take it out of the freezer to expose the fan's shaft and the dust cover. Pry the dust cover off and install the new one. Replace the fan and cover. Reconnect the wires and reinstall the icemaker. Put the food back in the freezer. Reconnect the power and water.The evaporator fan motor dust cap is a white plastic part that is sold individually. This dust cover is made for use in refrigerators manufactured by General Electric, Hotpoint, and Kenmore.
Replacement of the evaporator fan motor, fan blade, and grommets. The amount of disassembly to reach the part took most of the effort Read more
Fix loud fan noise and poor cooling with a new evaporator fan blade. Restores airflow across coils. Moderately difficult install in tight freezer space.
Transparent glass shelf for refrigerator food storage. Replace if cracked, broken, or shattered from heavy loads or accidental drops. Direct fit part.
Purchased a replacement shelf that fits perfect. Read more
Freezer won't turn on or control panel is unresponsive? This electronic control board manages all freezer systems. DIY install in 10-20 minutes.
Checked voltage into control module, power in...non out. Found Appliance Parts Pro on line, found part, checked price. Checked price at appliance part store 60 miles away. Ordered part from APP, received in very prompt time. Installed, plugged in, turned on...Success. Thank You Read more
Replacement storage basket for chest freezers. Keeps food organized and accessible. Order a new basket if yours is cracked, broken, or missing.
Found them on AppliancePartsPros.com. Their suggested part number was 100% accurate! Read more
Adjustable leveling foot installs at the bottom of your appliance to ensure stability and proper leveling. Replace if broken, cracked, or missing.
I determined that it was a problem that occurred during the defrost cycle by resetting the GFCI outlet and forwarding the defrost timer until the defroster came on. Once the defrosting began, the GFCI outlet would reliably trip. I took apart the shielding inside of the freezer and tested the defrosting without the heating element or the thermostat connected. Since that looked good, I tested for proper functionality of the thermostat by removing it, placing it in a working freezer, and checking... Read more
Creates an airtight seal to keep cold air in and prevent frost buildup. Replace if torn, cracked, or leaking. Verify fit with your model number.
Replaced the door seal I will not know for 2to3 weeks if that fix it or not Read more
Spring should have GOLD color.
Downloaded the Technical Service Guide and followed the instructions for removal of the Door Closure Mechanism. Items the instructions failed to mention: 1. Although they took the trouble to call for removal of a 3/16" Allen head bolt, they referred to the closure mounting bolts as just "bolts". In fact, they were T-25 bolts. If I didn't have a Torx kit, it would have required a trip to the Orange Big Box Home Center to complete the job. 2. Although the instructions don't describe this step,... Read more
This is the electronic control and display board inside your standalone freezer that lets you set the temperature, view the current temperature, and manage settings like fast freeze. It processes your inputs and communicates with the other components to maintain the correct temperature. Replace it when the display is blank or flickering, buttons are unresponsive, or the freezer is not maintaining the temperature you've set.
Easiest fix in the world! Took a painters putty knife and pried off the panel. Panel popped off and iI just replaced it. Make sure you turn the power off first before you start your repair. Read more
No water from dispenser or ice maker? This water inlet valve assembly controls water flow into your refrigerator. DIY-friendly repair in about 2 hours.
I purchased a replacement water valve assembly and a replacement water reservoir from AppliancePartsPros and researched some online videos to learn how to replace both these items, including all new water tubing. In the online process, I utilized "how-to" videos from AppliancePartsPros, too. Installing the water reservoir proved the most tricky, mostly because it was tricky feeding the tubing under the refrigerator. By comparison, installing the valve assembly and running new tubing for it was... Read more
Interior light bulb for freezers and refrigerators. Replace when bulb burns out, flickers, or dims to restore visibility inside your appliance.
Refrigerator in Costa Rica will repair when visit in late December. Read more
Plastic tubing that routes water through your refrigerator's system. Replace if cracked, brittle, kinked, or leaking to restore proper flow and prevent damage.
I replace the water inlet valve in my refrigerator about 8 months ago. About a week ago, the old plastic water line broke. I forgot how the water line connector worked and broke the valve trying to pull it out. I got a new valve and replacement water line, and it went in easily, just like the video said. Morals of the story: 1. Know how to remove the old plastic water line. I could have saved myself the price of a new valve if I'd remembered how the connector worked. Unless you have a really... Read more
Replacement glass panel for refrigerator shelves. Restores a smooth surface when original is cracked, broken, or missing. Fits shelf assemblies.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.