Need Help?
Call
This bake element heats the oven cavity for standard baking operations, restoring even heat when the original element fails. It installs at the rear or bottom of the oven cavity to provide the radiant heat needed for baking. What it does:
Ordered new bake element on 01/03/2021 and received on 01/05/2021. Thanks for the expedited service. My husband removed the old bake element and replaced with the new bake element. Took less than 15 minutes to remove and replace. Read more
Burner control knob for gas and dual fuel ranges. Installs on the control panel. Replace if knob is cracked, broken, won't turn properly, or missing.
I bought the replacement knobs from Appliance Parts Pros.com and they were much better knobs that what originally came with the unit. They are actually metal and the plastic posts that connect with the range are a much higher grade plastic. To be honest I think the stove works better than it did when it was new. Some of the original knobs may have been broken when we purchased the unit. Replacement took under 5 minutes for all of the knob. Oh....and by the way....they appear to be the same... Read more
Replacement drawer glide for range bottom drawer. Needed when glide is broken, cracked, or snapped, causing drawer to fall, scrape floor, or not slide.
Removed drawer and did a simple part to part replacement of the drawer glides Read more
The surface burner tube delivers gas from the control valve to the burner head on your gas range cooktop, enabling proper flame distribution. Located beneath the cooktop surface connecting to each burner, this tube needs replacement if you notice uneven flames, difficulty lighting the burner, or visible corrosion or blockages.
Ordered new burner tubes and it was a easy install. Read more
Range burner won't heat or cuts off? This 8-inch surface element is a common fix. Attaches with 3 wires. Easy DIY install takes about 15 minutes.
With the help of Wendee and Karen, we finally figured out my model numbers and which parts where correct. I ordered the parts and all arrived the next day except for the Broiler element which arrived in 2 days. I installed the new Baking Element myself. Took longer to figure out which curcuit braker to turn off. In about 30 minutes I had a brand new Baking Element in my oven working perfectly. On the following day, I installed the Broiler Element. That took a bit longer as it sits in a metal... Read more
Replace a cracked, broken, or missing thermostat knob on your gas range oven. This control knob installs on the front panel to adjust temperature settings.
This was not my own oven. My friend told me that she needed a new one but she does not have a computer. I went online and after calling her two or three times to find out the model number of her GE range, I placed the order. It was a breeze ordering the part once got the correct information and the part came in three days and she has it and all is well. Thank you! Read more
Replace your cracked or missing oven light lens to restore safe illumination. This cover protects the bulb and diffuses light for clear visibility while cooking. Confirm fit by model number.
Replaced the broken lens. Read more
Outer burner cap for sealed gas cooktop burners. Shapes flame distribution around the outer ring. Replace if cracked, warped, or missing.
Replaced burner assembly Read more
If your gas oven won't heat or takes too long to preheat, a weak igniter is usually the cause. This oven igniter lights the burner for reliable heating.
Indicator light that illuminates when burners or oven are active. Replace if it stays on constantly or fails to light. Verify fit with your model number.
Thermocouple sits in the pilot flame and signals the safety valve. Replace if the tip is melted, burned, or eaten away to restore pilot operation.
By replacing the thermocouple Read more
Chrome drip pan installs under range burners to catch spills and splatters. Replace when rusty, discolored, or worn to restore kitchen appearance.
Slipped the old ones out, slid the new ones in. So simple, even my husband could do it! Read more
The Rocker Switch is an OEM part for GE ranges. This switch is used to control the surface heating elements, allowing users to turn them on or off and adjust the heat levels. It is designed to fit securely into the range's control panel, providing reliable operation and ease of use.
Causes of a bad switch rocker element can include regular wear and tear, electrical issues, or damage from spills or high temperatures. Over time, the internal contacts of the switch can degrade, leading to malfunction.
Symptoms of a bad switch rocker element include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Replaced the switch took a total of about five minutes. I pulled the stove out and turned the breaker off so I only had to pull it out enough to get a 1/4 " nut driver in behind it. Removed three screws and the back cover came off. I pushed the switch threw from the back and switched over the two wires then reversed the process. Completely easy if you can use a screw driver your crazy not to replace it yourself Read more
Replace cracked, stained, or missing 8-inch drip bowls on your range cooktop. Catches spills beneath burner elements for a cleaner appearance.
Check problem solutions on your website. Very easy to I'd problem. Ordered part reviewed repair video. Made the repair...very easy with video help. Saved time and money.. Stove working great again Read more
Insulation wrap installs around the oven cavity to maintain heat and protect cabinetry. Replace if damaged, contaminated by pests, or missing sections.
Removed stove top then removed burner pan. Took out insulation on the top and sides of the oven. Cleaned top of oven well and replaced old insulation with the new blanket purchased from applianceParts pros. Read more
Replacement burner cap for 18K high-output burners. Sits atop the burner head to shape and distribute the flame. Replace if cracked, chipped, or worn.
Replaced the burners caps with new. I was concerned they would not fit as the website stated "approximately 3 inches, approximately 2 inches & approximately 4 1/2 inches etc.". When measuring my burner caps, they were slightly larger (by approximately 1/4 "), but I took the chance and all fit perfectly. I was amazed at how quickly they arrived too. I would definitely use Appliance Parts Pros again. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.