General Electric Refrigerator Drawer, Shelf, Pan

Protects upper cavity components and restores finished appearance. Replace if cracked, broken, or missing to keep debris and moisture out of internal areas.

This rear glass shelf trim replaces the finished glass edge at the back of a refrigerator shelf, restoring a secure seat and clean appearance. It helps keep items from sliding off and reduces gaps where spills can drip. What it does:

• Provides the finished rear edge and support for a refrigerator glass shelf.
• Helps the shelf seat and lock into position; a broken or missing trim can prevent proper seating.
• Reduces food/items from shifting toward the cabinet rear and helps contain minor spills.
• Restores appearance when the original trim is cracked, chipped, or worn.

• Handle the glass trim carefully; wear cut-resistant gloves and eye protection during installation.
• Remove the shelf per the appliance's OEM instructions before replacing the trim, then refit the shelf and verify it seats properly.
• Inspect mounting clips or supports and replace if damaged to ensure a secure fit.

This fixed freezer module shelf supports and secures the freezer module assembly, restoring stable storage and preventing items from shifting or contacting the module. It's a direct replacement for a cracked, warped, or missing shelf. What it does:

• Holds and supports the freezer module assembly so it stays properly positioned.
• Keeps stored items from contacting or damaging the module.
• Replaces shelves that are cracked, broken, or bent and that allow items to slide or fall.
• Reduces rattling or movement caused by a loose or broken shelf.

• Disconnect power to the refrigerator before servicing to prevent electrical hazard.
• Empty the freezer area and remove loose shelves or bins that block access.
• Align the shelf with its mounting points and seat it gently; do not force or modify the part.
• If fasteners are present, reuse OEM fasteners or replace with manufacturer-specified hardware.

Replaces a cracked, broken, or missing door bin on your side-by-side refrigerator. Restores secure storage for bottles, jars, and condiments.

Drawer slide liner provides smooth, low-friction glide for refrigerator drawers. Replace if cracked, worn, or causing drawer to stick or catch on track.

Slide rail assembly that mounts under the fresh-food shelf to guide your deli or snack drawer. Replace this part if your drawer sticks, tilts, or falls off track.

Right hand side

Upper freezer basket slide rail for bottom-mount refrigerators. Guides the top basket for smooth gliding. Replace if cracked, warped, or broken.

Replaces a cracked, broken, or missing right-side glide bucket on your refrigerator door. Secures storage bins and allows smooth sliding on the rail.

Outer slide rail that guides refrigerator shelves and drawers. Replace if your rail is cracked, bent, broken, or missing to restore smooth gliding movement.

This replacement vegetable cover installs above the refrigerator crisper drawer to restore a flat, protective surface for produce and small items. It replaces cracked, chipped or sagging covers to keep the drawer area organized and functional. What it does:

• Replaces the clear/plastic cover that sits over the crisper (vegetable) drawer.
• Supports items stored above the drawer and helps keep them from falling into the crisper.
• Common symptom fix: replaces covers with cracks, chips, breaks, or visible sagging.
• Fits into existing shelf rails or supports—restores original fit and function when intact.

• High-level: Remove the crisper drawer, lift out the old cover, then seat the new cover into the same rails or clips.
• No electrical work is required; installation is an interior, tool-light procedure in most models.
• Keep removed screws or clips organized and inspect mounting rails for damage before installing the new cover.
• If the cover uses retaining clips, replace any broken clips to ensure a secure fit.

Replace your broken, chipped, or missing refrigerator cantilever half-glass shelf. Restores storage space and organization inside your fridge.

This module shelf supports and secures the freezer control module or related electronics, keeping components stable and properly positioned for reliable operation. Fits into the freezer compartment to help prevent vibration and contact damage. What it does:

• Provides a stable mounting surface for the freezer control module or electronics assembly
• Keeps wiring and small components organized and away from cold airflow
• Reduces vibration and movement that can cause intermittent electrical issues
• Helps prevent physical damage from loose parts inside the freezer compartment

• One module shelf

• Disconnect power to the appliance before servicing to avoid shock or injury
• Inspect and reuse existing mounting hardware if not explicitly supplied

Mounts to the freezer wall to hold the upper basket in place. Replace if broken, missing, or cracked to restore proper alignment and smooth sliding.

Slide support assembly that stabilizes and guides your refrigerator freezer drawer. Replace when the original is cracked, broken, or worn to restore alignment.

Mounting bracket that secures shelves and internal components in your refrigerator. Replace if cracked, broken, or missing to keep shelves stable and prevent shifting.