General Electric Refrigerator Filter

The water filter is an OEM part for GE refrigerators. This filter removes or reduces various contaminants.

Features and Benefits:

• Easy DIY replacement, typically mounted inside the refrigerator at the back of the compartment.
• Removes or reduces various contaminants in your water and ice, including lead, cysts, asbestos, atrazine, , taste and odor, chlorine, sediment, turbidity, and more
• NSF/ANSI 42 and 53 standards
• 6 Month lifespan filter
• Carbon Block media
• Micron rating: 0.5-1 micron (Class I)

When to replace your filter:

• Bad taste or odor in water and ice
• Cloudy or discolored ice
• Reduced water flow or pressure
• Refrigerator replace filter indicator light is on

Note: If replacing the Culligan metal canister design filter for the first time, a special adapter, part number AP2615702 is needed, which is not included with this part. The compatible bypass cap is part number AP6891551.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

The GE Water Filter Manifold is an OEM replacement part. It is a refrigerator water filter housing that ensures clean and refreshing drinking water. Measuring 10.2 x 6.2 x 2.2 inches. It features an easy-to-install design that makes replacing the old, worn-out manifold hassle-free.

Causes of a bad manifold can include cracks or damage from material fatigue, blockages from sediment build-up, or failures in the valve mechanisms that control water flow.

Symptoms of a bad part:

• Poor water quality and taste
• Low water pressure
• Water leaks or dripping from the filter housing

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

Filter Material: Carbon Block. Micron Rating: 0.5. Flow Rate: 0.5 gpm. Operating Pressure: 120 psi. Approximate dimensions: 10" x 1-3/4"

The GE Refrigerator Water Filter RPWFE is an OEM part for GE refrigerators. This advanced water filter is crucial for removing contaminants and impurities from your refrigerator's water supply, ensuring you have access to clean, fresh-tasting drinking water and ice. Utilizing a state-of-the-art filtration process, the RPWFE filter is capable of reducing various contaminants, including lead, chlorine, and five pharmaceuticals, providing peace of mind about the quality of your water.

Over time, water filters can become clogged with particles and contaminants, leading to a decrease in water flow and a reduction in the effectiveness of filtration. It's important to replace your refrigerator water filter as recommended by the manufacturer, typically every six months, to ensure optimal performance and maintain the quality of your water.

Symptoms of a filter needing replacement include:

• Reduced water flow from the dispenser.
• Unpleasant taste or odor in the water or ice. 
• The refrigerator's water filter indicator light turns on

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

The GE XWFE Refrigeration Water Filter is an OEM part for GE refrigerators. This advanced water filter is designed to reduce a wide range of contaminants, including chlorine, lead, cysts, and select pharmaceuticals, providing clean and safe drinking water and ice. It seamlessly integrates into the refrigerator's filtration system, ensuring optimal water quality.

You should replace this water filter if it becomes clogged or reaches the end of its lifespan, typically every six months. Common causes of a bad water filter include excessive contaminants, improper installation, or failure to follow the replacement schedule.

Symptoms of a bad water filter include:

• Reduced water flow from the dispenser
• Unpleasant taste or odor in water and ice
• Cloudy or discolored water
• The filter indicator light on the refrigerator signaling a replacement

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Drive Cup is an OEM part for GE refrigerators, designed for the ice dispensing system. This part acts as a housing that holds the MWF water filter. The manifold ensures that water flowing into the refrigerator passes through the filter, removing contaminants and impurities to provide clean, fresh-tasting water and ice.

Symptoms of a failing drive cup include:

• Ice not dispensing properly or at all
• Unusual noises coming from the ice maker during operation
• Ice getting jammed in the dispenser mechanism

Causes of drive cup failure often include mechanical wear from regular use, cracking due to stress or impact, or deformation caused by freezing temperatures which can impair its fit and function.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The GE refrigerator water filter is an OEM replacement part responsible for ensuring the quality of the water dispensed on GE Profile top and bottom freezer refrigerators. It is responsible for purifying the water before it reaches your glass or ice maker, providing you with clean and safe drinking water directly from your refrigerator. To maintain optimal water quality and ensure the filter's effectiveness, it is recommended to replace the filter every 6 months or when the rated capacity of 750 gallons is reached.

Over time, the water filter can become clogged with sediment, reducing its effectiveness. Regular use and the accumulation of minerals and contaminants can lead to the need for replacement.

Symptoms of a bad water filter include:

• Reduced water flow from the dispenser
• Ice cubes with an unusual taste or odor
• The filter indicator light staying on
• Visible particles in the water or ice

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. For the best performance, it is recommended to replace the water filter every six months or as indicated by the filter change light on your refrigerator.

The GE Refrigerator Water Filter Housing and Tube Assembly is an OEM part for GE refrigerators. It houses the water filter and connects it to the water supply line, ensuring clean and filtered water is dispensed.

Common causes of a bad housing and tube assembly include cracks or breaks from wear and tear, exposure to high water pressure, or damage during filter changes.

Symptoms of a bad water filter housing and tube assembly include:

• Water leaks around the filter area
• Reduced water flow or pressure
• Unusual noises during water dispensing
• Visible cracks or damage to the housing

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Water Filter Housing Assembly is an OEM part for GE refrigerators. The water filter head holds the water filter and connects the water lines to the water filter. Includes the filter head and water lines.

Causes can involve cracks, deformities or wear to sealing surfaces over time. Accidental dents or impacts may compromise housing integrity.

Symptoms of a bad housing assembly include:

• Leaks or drips around the filtration compartment
• Inability to properly seat replacement cartridges
• Failure of water lines to engage the filtration system

This is a genuine OEM part that works for some models of GE, and Hotpoint models.

The GE refrigerator water filter is an OEM replacement part responsible for removing impurities and contaminants from the water supply in the refrigerator. The filter is specifically designed to effectively filter out various potentially harmful contaminants. The water filter connects to the water line, ensuring that the water dispensed from the refrigerator's water dispenser or used for ice making is clean, clear, and free from unwanted particles or odors.

The GE refrigerator water filter can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

This part fixes the following symptoms:

• Foul odor or unpleasant taste in the dispensed water or ice cubes
• Reduced water flow from the dispenser
• Visible discoloration or particles in the water
• Decreased effectiveness in filtering out contaminants
• Filter replacement indicator light or message appearing on the refrigerator display
• Filter lifespan reaching its expiration date

This filter reduces contaminants and removes chlorine taste and odor to provide cleaner, fresher water. The coconut carbon activated filtration media removes microscopic particles down to 0.5 microns. Compatible with select GE side-by-side and bottom-freezer refrigerators. Simple twist and lock design provides easy, tool-free, no-mess filter replacement. For best filtration results, filter cartridge should be replaced every six months or 300 gallons. Filter Media: Coconut Carbon Block. Micron Rating: 0.5. Filter Type: Canister. Flow Rate: 0.5 gpm. Approximate dimensions: 5 x 3.5 x 3.5 inches. Temp. Range: 33 - 100 °F. Press. Range: 30 - 120 PSI. Meets NSF Standard: 42. Approved for WQA Gold Seal. This part replaces the MWF filter.

The Water Filter Housing and Tube Assembly is an OEM part for GE refrigerators. This assembly is responsible for securely holding the water filter in place while directing water through the filter and into the dispenser or ice maker. Approximate dimensions: 18" x 14.7" x 3.3"

Over time, the water filter housing and tube assembly can become damaged due to regular use, exposure to high water pressure, or mineral deposits building up inside the tubes. Such damage may lead to leaks or reduced water flow, affecting the performance of the refrigerator's water and ice systems.

Symptoms of a faulty water filter housing and tube assembly include:

• Water leaks around the filter area
• Low water flow to the dispenser or ice maker
• Difficulty installing or removing the water filter

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Water filter head and tubing assembly holds the water filter and connects the water lines to the water filter. Approximate dimensions: 13.6" x 12.7" x 4.6"

This in-line water filtration system reduces water contaminants and improves taste of drinking water and ice. Reduces the taste and odor of chlorine through high quality carbon block media without removing minerals beneficial to your health. The filter should be replaced every six months or 300 galleons for best performance. The Quick Connect feature makes filter replacement fast and easy. Flow rate: 0.5 gpm/1.9 lpm. 1/4" quick connect fittings on both ends.

This whole house carbon filter is used in water pumps to reduce the number of contaminants found in water. This filter removes odors, rust, sediment, and sand that is often found in well water and some city-provided water. These impurities can affect the taste of drinking water and, in turn, affect the taste of coffee, tea, and foods cooked using water. It may also have an odor if the area has a high concentration of sulfur or iron. The manufacturer suggests replacing the filter every 30,000 gallons or every three months. This carbon filter is used on an in-line water filter that supplies water for the whole house. It is often used in combination with water softeners. If the water begins to taste or smell before the filter's three-month recommended life, a new filter should be installed. If the water quality is bad, the filter may need to be changed more often than recommended. This is normally indicated by smell and taste in foods and beverages made with water. This whole house carbon filter is sold individually. It is an authentic OEM replacement part sourced directly from the manufacturer. It is designed for use in water filters manufactured by General Electric.

This water filter manifold assembly holds the MSWF cartridge and routes water through the refrigerator's filtration system to the dispenser and icemaker. Replacing a damaged filter head restores a secure seal and consistent water flow.

• Provides the twist-lock mount and seal for the MSWF filter cartridge
• Connects inlet and outlet lines to direct filtered water to the dispenser and icemaker
• Common failure symptoms: leaks around the filter head, low or no dispenser flow, icemaker not filling, or the filter not seating/locking properly
• Designed specifically for refrigerators that use the MSWF filter style

• Disconnect power and shut off the water supply before servicing
• Dispense water to relieve line pressure; place a towel to catch residual water
• Remove the MSWF filter; transfer mounting hardware and line connections to the new assembly one at a time to maintain orientation
• Restore water and power; check all connections for leaks and run water to purge air from the system

This filter uses a dense engineered carbon filter media rated NSF 42 and 53 for the reduction of waterborne contaminants such as asbestos, atrazine, chlorine, cysts, lead, mercury, toxaphene, turbidity, and sediment. It has a filter life of 6 months or 300 gallons and features an easy twist-and-lock style technology that fits easily underneath your sink. Dimensions: 2 inches x 8 1/2 inches. Flow Rate: 1 GPM.