General Electric Refrigerator Drawer, Shelf, Pan

Replacement cantilever half glass shelf that restores a flat, easy-to-clean storage surface inside the refrigerator. Provides a stable platform for containers and replaces a cracked, chipped, or missing shelf. What it does:

• Provides a flat, sturdy surface for storing food and containers on refrigerator shelving rails.
• Slides into existing cantilever shelf supports for quick replacement.
• Restores full usable shelf space after a broken or missing glass shelf.
• Helps contain small spills on a smooth, easy-to-clean surface.

• Remove all contents from the area before installing and place on a padded surface to avoid damage.
• Handle with care and wear cut-resistant gloves; glass edges may be sharp if broken.
• Slide the shelf into the existing side supports until fully seated; do not force if misaligned.
• Dispose of any broken glass safely and check that supporting rails or brackets are intact and secure.

This fixed freezer module shelf provides a secure mounting platform for the freezer control module and related components, helping keep electronics stable and organized inside the freezer compartment. What it does:

• Holds and stabilizes the freezer control module and attached wiring or components
• Prevents module movement that can cause noise or connection issues
• Helps maintain proper clearance around electronics for ventilation
• Supports safe routing of wires to reduce pinching or abrasion

• One fixed freezer module shelf

• Disconnect power to the appliance before starting any repair
• Typically installs with a few screws; access may require removing the freezer inner liner or nearby trim
• Handle plastic parts carefully to avoid cracking; support the module while fastening shelf

This pan frame assembly provides the structural support and mounting for the refrigerator's drain/collector pan, helping to keep the pan securely positioned and directing condensation to the drain for reliable moisture control. What it does:

• Holds and secures the appliance drain/collector pan in the correct position to prevent shifting
• Helps route condensation toward the drain to reduce water pooling under components
• Restores proper alignment if the original frame is cracked, warped, or missing
• Reduces risk of vibration or noise caused by a loose pan

• One pan frame assembly

• Always disconnect power to the appliance before beginning service
• Remove adjacent panels and components as needed for access; keep track of fasteners
• Handle carefully to avoid damaging mounting tabs or nearby wiring

This glide upper basket is the replacement upper rack that restores smooth sliding and secure support for items placed on the top rack. It helps restore proper rack movement and organization for reliable dish loading. What it does:

• Replaces a worn or damaged upper rack to restore smooth gliding action
• Supports dishes and glassware on the top rack so items sit securely
• Reduces rack binding, uneven movement or jagged travel along the rails
• Helps prevent misalignment that can cause scraping or improper door closure

• Disconnect power to the appliance before starting any repair and shut off water supply if applicable
• Remove existing rack and mounting hardware carefully; keep small parts for re-use
• Slide the new basket onto the rail system and verify smooth travel and proper alignment

This snack pan wire support holds the snack/deli pan or small shelf securely in the refrigerator, restoring stable storage and proper alignment so pans slide and sit without sagging or falling. What it does:

• Supports the snack/deli pan or small wire shelf to prevent sagging and uneven seating
• Keeps pans aligned so they slide smoothly and don't tip or fall
• Stops rattling or shifting caused by a bent or broken support
• Helps maintain organized storage in the compartment where the snack pan sits

• Unplug the appliance or disconnect power before servicing
• Remove the snack pan and any items from the compartment for safe access
• Inspect mounting tabs and slide rails; align and snap or slide the support into place per the original fit
• Handle sharp sheet-metal edges with care and use appropriate tools; replace if mounting tabs are damaged

This freezer basket assembly replaces a damaged or missing freezer storage basket to keep frozen items contained and organized for easy access. It restores the freezer's storage layout and prevents small items from shifting or falling through. What it does:

• Provides a dedicated basket for storing and organizing frozen foods
• Helps contain loose items to prevent them from falling into lower compartments
• Restores proper storage layout when an original basket is cracked, bent, or missing
• Reduces clutter so items are easier to see and retrieve

• Unplug the appliance or disconnect power before starting any work
• Remove food, ice, and surrounding shelves or drawers as needed for access
• Typically installs by sliding or clipping into the freezer compartment; handle gently to avoid bending
• If fasteners are present, retain OEM screws/clips and reinstall securely.

This wire basket fits inside the freezer compartment to hold and organize frozen foods, restoring secure storage and preventing items from shifting or falling. It's a direct-replacement style used where a wire basket is required. What it does:

• Replaces a cracked, bent or missing freezer basket so food stays organized and contained
• Restores proper airflow and access in the freezer shelving area
• Stops items from shifting or falling through gaps caused by a damaged basket
• Helps maintain easy loading and unloading of frozen goods

• Disconnect power to the appliance before working in the freezer; remove all food from the area being serviced
• This is a user-replaceable part; remove any retaining clips or slides and lift out the old basket, then set the new basket into the same supports
• Wear gloves to protect hands from sharp edges on the old or new basket

This slide-out lower basket replaces a worn or damaged refrigerator lower storage basket to restore organized storage and easy access to fresh foods. Durable molded construction keeps produce contained and visible. What it does

• Provides a removable lower storage basket for organizing fruits, vegetables, and deli items
• Slides out for easy access so you can reach items at the back without lifting
• Replaces cracked, broken, or warped baskets that no longer support contents
• Helps keep refrigerator interior tidy and prevents items from rolling around

• One lower slide-out basket

• Snap or slide into the existing lower track; matches original mounting points
• Remove all food and use caution when handling edges to avoid pinching
• Inspect tracks and glides for damage; replace glide parts separately if basket does not slide smoothly
• Disconnect power only when performing additional repairs nearby

This glass vegetable pan shelf provides a durable, easy-to-clean surface above the crisper area so produce and deli items sit flat and spills are contained for faster cleanup. It restores a level shelving surface after a cracked or missing shelf. What it does:

• Supports produce bins and food items for stable storage and stacking
• Creates a smooth, easy-to-clean surface to catch spills and drips
• Helps maintain proper airflow and organization inside the refrigerator
• Replaces cracked, chipped, or broken glass that risks contamination or injury

• Remove all food from the shelf area before installation
• Handle glass with care; wear cut-resistant gloves to avoid injury
• Slide the shelf into the existing side rails or clips until seated securely
• Replace hardware before use

This cover pan assembly replaces the evaporator drain area to catch and channel defrost water away from the evaporator and into the drain system, helping reduce leaks and ice buildup in the freezer compartment. What it does:

• Covers the evaporator area and collects defrost water for proper drainage
• Channels water to the drain to prevent pooling and potential refreezing
• Protects internal components from moisture and helps maintain normal defrost operation
• Commonly used when you see water pooling, ice buildup around the evaporator, or slow drainage

• Disconnect power to the appliance before starting work to avoid shock or damage
• Handle with care to avoid damaging the evaporator fins or nearby wiring; inspect and clear the drain tube before reassembly
• If gasket clips or mounting hardware are missing or damaged, replace them separately

A full-width cantilever shelf that restores stable, level storage inside the refrigerator. Replaces a bent or broken shelf to keep food organized and prevent items from sliding or falling. What it does:

• Supports refrigerator items on a full-width shelf, keeping contents level and secure
• Replaces damaged or bent cantilever shelving hardware that causes shelves to tilt or collapse
• Restores proper shelf alignment for even storage and safer handling
• Works with existing shelf tracks/brackets so the shelf locks into place

• Remove food and glass shelves from the area before installing
• Slide or snap the cantilever ends into the existing shelf tracks
• No special tools typically required; handle glass or edged surfaces with care