General Electric Refrigerator Drawer, Shelf, Pan

The Dairy Door is an OEM replacement part for GE refrigerators. It serves as a sealed storage compartment ideal for keeping dairy and other perishable items colder longer. 

Color: clear. Measures about 16 inches wide by 8 inches high.

The dairy door houses precision-engineered vents, seals, and insulation optimized for maintaining a dedicated cold zone of around 33°F. tall shelves and wide doors maximize capacity.

Symptoms of a failing door include:

• Temperature in dairy bin fluctuating outside the normal cold range  
• Seals no longer provide an air-tight barrier to prevent warm air entry
• Warping, cracks, or cosmetic wear developing on door surfaces

Causes may be severe temperature changes over time putting stress on materials, or general wear and tear from repetitive opening/closing motions.

The Vegetable Pan Lid is an OEM replacement part for GE refrigerators. Located in the refrigerator door, the vegetable pan is designed to store fruits and vegetables in a humid environment to retain freshness longer. Color: white. Measures about 15-1/2 inches wide by 7 inches deep.

Over time, the vegetable pan lid can become cracked or warped due to frequent use, exposure to heavy items, or temperature fluctuations. A damaged lid can lead to improper sealing, which can compromise the freshness of the stored produce.

Symptoms of a failing lid include: 

• Inability to properly seal in produce items  
• Excess moisture or condensation buildup inside the refrigerator door
• Difficulty removing or replacing the lid securely
• Damage or wear that compromises the lid's structural integrity

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The ASM Cover Veg Pan is an OEM part for GE refrigerators. It serves as a cover for the vegetable crisper drawer, helping to maintain the freshness of stored produce by providing a controlled environment. This cover supports the shelf above the crisper and can also act as an additional storage surface.

Causes of a bad ASM cover veg pan can include cracks or breaks from heavy use, warping due to temperature fluctuations, or general wear and tear over time. These issues can compromise the cover's ability to properly seal the vegetable drawer and support the shelf.

Symptoms of a bad ASM cover veg pan include:

• Cracks or visible damage to the cover
• Difficulty in fitting the cover securely over the crisper drawer
• Reduced effectiveness in keeping vegetables fresh

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Door Shelf Bar is an OEM replacement part for GE refrigerators. It provides storage organization on the refrigerator door. This convenient accessory bar creates compartments for smaller items like condiments, sauces, and produce.

Causes of a bad shelf bar may include slipping out of position due to weak retention clips or plastic warping over multiple years of use. Normal wear and cleaning chemicals can also degrade shelf gripping performance.

Symptoms of a bad Door Shelf Bar include:

• Difficulty adjusting or unstable shelving configurations
• Items falling through weak bar retention clips
• Cracked or warped plastic compromising strength and flexibility

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Vegetable Pan Glass Cover is an OEM replacement part for GE refrigerators. It serves as a lid for the vegetable pan, helping to maintain the humidity levels and temperature to keep vegetables and fruits fresh. The cover measures roughly 27.5” by 13”.

Symptoms of a bad Vegetable Pan Glass Cover include:

• Cracks or chips in the glass
• Warping or damage to the frame
• Difficulty fitting onto the vegetable pan
• Condensation or frost build-up due to an improper seal

The common causes for a malfunctioning Vegetable Pan Glass Cover can be attributed to physical damage, wear over time, or manufacturing defects that affect its fit and seal. 

This GE OEM replacement part is also compatible with select GE, Hotpoint, and select Kenmore models.

The Crisper Cover is an OEM part for GE refrigerators. It serves as a lid for the crisper drawer, helping to maintain optimal humidity levels for storing fruits and vegetables. 

Causes of a bad crisper cover can include accidental impact, overloading the refrigerator shelves, or general wear and tear over time.

Symptoms of a bad crisper cover include:

• Cracks or breaks in the cover 
• Difficulty opening or closing the crisper drawer 
• Reduced effectiveness in maintaining humidity levels 
• Glass insert falling out or not fitting properly 

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Gal Bin FF Asm is an OEM part for GE refrigerators. This gallon door bin is designed to hold large containers, such as gallon jugs, in the refrigerator door, maximizing storage space and keeping items easily accessible. The door bin measures approximately 20 inches x 7 inches x 4.5 inches. 

Common causes of a bad bin include cracks from overloading, breakage due to impact, or wear and tear from frequent use.

Symptoms of a bad gallon bin assembly include:

• Cracks or visible damage on the bin
• The bin not fitting securely in the door
• Difficulty in placing or removing items
• The bin falling out or sagging under weight

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Fresh Food Door Shelf is an OEM part for GE refrigerators. This part provides additional storage space on the refrigerator door for organizing and holding items like condiments, bottles, and jars, making them easily accessible.

Common causes of a bad door shelf include general wear and tear from regular use, overloading the shelf with heavy items, or damage from accidental impacts.

Symptoms of a bad Fresh Food Door Shelf include:

• Cracks or breaks in the shelf
• The shelf not fitting securely on the door
• Items falling off the shelf
• The shelf sagging or becoming loose

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Storage Pan Humidity Adjuster is an OEM replacement part for GE refrigerators. This part is located on the crisper drawer, the humidity adjuster allows you to open or close the air vent to the drawer. The adjustable panel controls humidity levels to keep foods fresher longer based on individual storage needs.

Causes of a bad humidity adjuster can include regular wear and tear, accidental damage, or issues with the sliding mechanism that controls humidity levels. If the adjuster becomes faulty, it can affect the preservation of your fruits and vegetables.

Symptoms of a bad Storage Pan and Humidity Adjuster include:

• Inability to modify humidity within the pan storage area
• Condensation buildup and dripping into the door compartment
• Noticeable loss of seals allowing air exchange with the outside environment
• Warped or broken panel preventing control of vent positioning

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Chiller Shelf is an OEM replacement part for GE refrigerators. Located inside the refrigerator door, this shelf provides storage for items like snacks, beverages, condiments, or leftovers that benefit from cooler temperatures. 

Causes of a bad chiller shelf can include cracks or breaks developing from prolonged use. Items may have been over-packed onto the shelf, putting undue stress on the plastic material.

Symptoms of a faulty chiller shelf include: 

• Sagging or inability to fully support the weight of items
• Cracks or separations in the plastic
• Items falling through or off of the shelf

This OEM GE shelf is also compatible with Hotpoint and some Kenmore refrigerator models.

The Veggie Pan Drawer is an OEM replacement part for GE refrigerator models. It is located below the main fresh food storage shelves, this enclosed space utilizes an evaporative system to humidify stored produce.

Causes of failure typically involve excess mineral buildup clogging the humidity mechanism over several years of use. Introducing too much water can also damage electronic components.

Symptoms to watch for include:

• Interior pan cracking or tiles crumbling from over-saturation
• Drawer failing to maintain proper humidity levels  
• Premature spoiling of fruits and veggies lacking consistent moisture

This OEM GE part is compatible with Profile models as well as some Kenmore refrigerators. 

Color: white

The Glide Bracket is an OEM part for GE refrigerators. This left bracket supports the refrigerator drawer, allowing it to slide in and out smoothly for easy access to stored items.

Causes of a bad glide bracket can include regular wear and tear, damage from overloading the drawer, or accidental impact that causes the bracket to crack or break.

Symptoms of a bad glide bracket include:

• Difficulty sliding the drawer in and out
• The drawer not aligning properly or coming off its tracks
• Unusual noises when opening or closing the drawer
• Visible cracks or breaks in the bracket

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This deep fresh food door bin installs on the right-hand refrigerator door to provide sturdy storage for taller containers and everyday items. Replace a broken or missing bin to restore safe, organized space on your refrigerator door.

• Mounts to the right-side fresh food door to hold and organize items
• Deep profile adds capacity for taller containers and bottles
• Replace when the bin is cracked, warped, has broken tabs, or won't stay seated
• Common symptoms: bin falls out, leans, is loose, or is missing

• Empty the old bin; lift straight up to remove from the door liner
• Align the new bin's hooks with the slots and press down until fully seated
• Handle gently; allow plastic to warm to room temperature to reduce cracking risk
• Do not force into place; ensure correct right-side orientation

This left-side bucket glide supports a drawer or basket and lets it slide smoothly inside your refrigerator. Replacing a worn or broken glide restores proper support, alignment, and easy open/close operation. What it does:

• Provides the left-side slide/rail for a drawer or basket
• Supports weight and guides smooth opening and closing
• Helps keep the drawer/basket level and properly aligned
• Common symptoms: hard-to-open drawer, sagging or falling off track, cracked/broken rail

• 1 left-side bucket glide

• Unplug the refrigerator and clear the affected drawer/basket
• Remove the drawer/basket; unfasten and remove the damaged glide
• Install the new glide using the existing hardware; ensure it sits flush and secure
• Reinstall the drawer/basket and test for smooth travel

• Left/right is determined when facing the appliance from the front.

The Snack Pan Slide is an OEM part for GE refrigerators. This part provides a smooth track for the snack pan or deli drawer to slide in and out, ensuring easy access to stored items.

Causes of a bad snack pan slide can include regular wear and tear, damage from overloading the drawer, or breakage due to improper handling.  

Symptoms of a bad snack pan slide include:

• Difficulty opening or closing the snack pan
• The snack pan not sliding smoothly or getting stuck
• Visible cracks or damage to the slide
• The snack pan not staying aligned or securely in place

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.