General Electric Refrigerator Drawer, Shelf, Pan

This slide-out freezer shelf restores a smooth, stable storage surface and easy access in the freezer compartment. Replace a cracked, hard-to-slide, or missing shelf to regain capacity, organization, and the spacing your freezer was designed for.

• Provides a level storage surface and slides forward for better visibility and reach
• Secures into the side supports/rails at the designated freezer position
• Helps maintain intended spacing and airflow between freezer sections
• Typical symptoms: cracked or broken shelf, damaged tabs, won't slide smoothly, sits unevenly, or missing shelf

• Remove items from the area and support the shelf with both hands when removing/placing
• Align with the side supports/rails and slide fully into place; verify correct front/back orientation
• Do not force; ensure it is seated in the correct slots before loading
• Handle edges carefully; wear cut-resistant gloves to prevent injury

This freezer shelf trim replaces a damaged or missing edge piece on the freezer shelf. It attaches to the shelf/frame to provide a finished lip that helps contain items and restores the shelf's original fit and appearance.

• Provides the finished edge on a freezer shelf to help keep items from sliding off
• Attaches to the shelf/frame for a secure, correct fit
• Replace when cracked, warped, loose, or missing
• Common symptoms include a broken or jagged shelf edge, trim that won't stay attached, or items slipping off the shelf

• Unplug the refrigerator and remove items from the affected shelf
• Remove the shelf if needed; release and remove the old trim
• Align the new trim with the shelf/frame and press until fully seated and secure
• Do not force parts together; inspect the shelf/frame for damage before reassembly

This vegetable pan cover frame supports the glass shelf above the crisper drawers and forms the rails the drawers slide on. Replacing a cracked or warped frame keeps the shelf stable and the crisper drawers aligned and moving smoothly.

• Supports the glass shelf over the vegetable/crisper pans in the fresh food section
• Provides slide rails and alignment for the crisper drawers
• Helps prevent shelf sagging and glass shifting
• Typical symptoms: broken tabs, drawers binding or dropping, unstable or uneven shelf

• Unplug the refrigerator and remove food from the crisper area
• Carefully remove the glass insert and set it aside; wear cut-resistant gloves when handling glass
• Lift out the old frame and set the new frame onto the side supports, fully seated and level
• Reinstall the glass and drawers; confirm drawers slide smoothly

This vegetable pan cover frame supports the crisper glass and forms the top of the crisper compartment. Replacing a damaged frame restores proper drawer fit, level shelf support, and better spill containment inside your refrigerator.

• Supports the crisper cover glass to provide a stable shelf surface
• Forms the lid over the vegetable/crisper drawers to help contain spills
• Helps maintain proper drawer alignment and smooth operation
• Common symptoms: cracked or warped frame, sagging shelf, drawers binding or not closing, broken support tabs

• Disconnect power and remove food from the crisper area
• Slide out crisper drawers; carefully lift out the glass before removing the frame
• Transfer any reusable hardware from the old frame
• Seat the new frame, reinstall the glass and drawers, and verify smooth drawer movement

This fixed-position freezer shelf restores sturdy, level storage space in your freezer compartment. Replace a cracked or missing shelf to regain capacity and keep items organized with proper spacing for airflow.

• Provides a stable platform for storing frozen foods
• Maintains designed spacing to support organization and airflow
• Direct replacement when the original shelf is broken, warped, or missing
• Common symptoms: cracked/broken shelf, sagging, items tipping, reduced usable space

• Unplug the appliance and clear the freezer area before replacing the shelf
• Align the shelf with the designated side rails/slots and insert level
• Ensure both sides are fully seated and secure before loading items
• Avoid overloading to prevent damage

This fixed freezer shelf restores a sturdy, level storage surface in the freezer compartment. Replace a broken or missing shelf to regain organization, correct spacing, and full storage capacity.

• Provides a fixed-position storage surface inside the freezer
• Helps keep items level, organized, and easy to access
• Restores proper spacing with adjacent shelves, drawers, or baskets
• Replaces a cracked, warped, or missing shelf

• Disconnect power before servicing; wear gloves to protect hands
• Empty the area, then align the shelf with the side-wall slots or supports
• Slide or place the shelf into the supports until fully seated and level
• Distribute weight evenly and avoid overloading after installation

This freezer shelf assembly restores stable, level storage space in the freezer compartment. Replace a cracked or missing shelf to keep food organized and maintain proper spacing for consistent cold-air circulation.

• Provides a sturdy, level surface to store and organize frozen items
• Helps maintain proper airflow and spacing for efficient cooling
• Replace if the shelf is cracked, bent, broken, or missing
• Common signs include sagging under normal load or not staying seated in side supports

• Unplug the refrigerator before servicing
• Remove items from the area, then lift/slide the old shelf out of the side supports or tracks
• Position the new shelf in the same slots and fully seat both sides
• Verify the shelf is level and secure before loading items

The Cover, Crisper Drawer is an OEM part for GE refrigerators. This cover sits on top of the crisper drawer, providing a sturdy surface for items stored in the refrigerator while also helping to maintain optimal humidity levels within the drawer. It is designed to fit securely and support the items placed on top of it, ensuring efficient use of storage space.

Causes of a bad cover can include wear and tear from regular use, accidental impact from heavy items, or stress fractures from overloading the drawer.

Symptoms of a bad crisper drawer cover include:

• Visible cracks or breaks in the cover
• Difficulty sliding the crisper drawer in and out
• Items not sitting level on top of the cover

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This freezer shelf restores lost storage and organization inside your freezer. Replace a broken or missing shelf to add a stable level for stacking and separating items so food stays accessible and easy to arrange.

• Provides an additional storage level inside the freezer
• Helps organize and separate frozen foods for quicker access
• Replaces a cracked, bowed, or missing shelf
• Seats into the freezer's existing side supports for a secure fit

• Remove food from the area before replacing the shelf
• Handle carefully; edges and corners can be sharp
• Align with the side supports and ensure the shelf is fully seated on both sides
• Distribute weight evenly; avoid overloading the shelf

This shelf module assembly restores a sturdy, level storage surface inside your refrigerator. Replace a damaged or missing shelf to recover usable space and keep items organized and easy to access. What it does

• Provides a flat, stable surface to support food containers in the refrigerator compartment
• Restores storage capacity when the original shelf is broken, warped, or missing
• Helps keep contents organized and accessible
• Addresses issues like sagging, instability, or a shelf that won't stay seated in its rails

• One shelf module assembly

• Disconnect power to the refrigerator before servicing
• Remove items from the area and slide/lift out the old shelf
• Transfer any reusable trims or components from the old shelf
• Fully seat the new shelf in the side rails; ensure it's level and secure before reloading

This replacement vegetable pan cover assembly forms the shelf above your refrigerator's crisper drawers and helps the drawers operate correctly while supporting produce humidity. Replace a cracked or warped cover to restore stability and smooth drawer function. What it does:

• Creates the shelf surface over the crisper/vegetable bins
• Helps maintain humidity in the crisper area for fresher produce
• Provides support and tracks for crisper drawers to slide properly
• Replaces damaged or missing covers causing sagging shelves, sticking drawers, or poor crisper performance

• 1 vegetable pan cover assembly

• Unplug the refrigerator and clear the affected shelf area
• Remove crisper drawers; lift out the old cover carefully
• Seat the new cover on the support ledges and ensure it sits flat; reinstall drawers
• Handle components carefully to avoid damage, especially any glass

This shelf slideout assembly replaces the sliding rail that lets a refrigerator shelf glide in and out, restoring smooth, stable movement and easier access to stored items. Fits factory shelf mounting locations and installs without altering the cabinet. What it does:

• Provides the sliding support for a refrigerator shelf so it extends and retracts smoothly
• Replaces worn, cracked, or misaligned slide rails that cause sticking or uneven movement
• Stops shelves from catching, binding, or falling when pulled out
• Helps restore proper shelf alignment and load support

• Disconnect power to the appliance and remove food and the shelf before starting
• Installation typically requires removing the old slide, aligning the new rail in the shelf track, and securing with existing screws or clips
• Use basic hand tools; avoid forcing broken plastic tabs—inspect and replace damaged retainers if present

This slide-out freezer shelf restores smooth access and sturdy storage in the freezer compartment. Replace a cracked, missing, or hard-to-move shelf to keep frozen foods supported, organized, and within easy reach.

• Provides a gliding storage surface in the freezer compartment
• Supports and organizes frozen foods for easier access to items in back
• Restores proper fit and sliding action when the original shelf is damaged or binding
• Typical signs you need this part: cracked/broken or missing shelf, sticking or uneven slide

• Empty the shelf and remove any obstructing bins or baskets
• Align rear tabs/pegs with the freezer slots or rails, then lower the front into place
• Ensure the shelf seats fully and slides smoothly before reloading food
• Handle edges carefully; consider wearing cut-resistant gloves

A replacement tuckaway shelf assembly for refrigerators that restores a fold-away shelf for flexible storage, letting you create space for tall items and keep stored goods organized and secure. Use when the shelf or tuck mechanism is damaged. What it does:

• Provides a fold-away/"tuckaway" shelf so you can easily make room for taller items without removing shelves.
• Supports stored foods and containers with the original-style shelf frame and mechanism.
• Replaces assemblies that are cracked, loose, no longer tucking, or otherwise damaged.
• Fits the original shelf locations and operates like the factory-installed unit.

• Remove food and any adjacent shelves or drawers before starting; handle glass or edges with care.
• Wear cut-resistant gloves when handling broken or glass components.
• Typically engages into existing support rails or brackets; align the assembly and slide or snap into place per your model's service instructions.

This refrigerator crisper cover sits above the vegetable drawers, supporting the shelf surface and guiding the bins. Replace a cracked or sagging cover to restore sturdy support, smooth drawer movement, and organized storage in the fresh-food section. What it does

• Forms the shelf over the vegetable drawers and supports the glass insert
• Aligns and guides the crisper drawers for proper slide-in/slide-out
• Helps maintain correct spacing and airflow in the fresh-food compartment
• Replace when cracked, warped, or tabs are broken; if the shelf sags or drawers bind

• Includes: 1 refrigerator crisper cover

• Unplug the refrigerator and remove items from the crisper area
• If your model uses a separate glass insert, lift it out and set aside; remove the drawers
• Lift out the old cover and set the new cover flat on its supports
• Reinstall the glass and drawers; restore power and verify smooth operation

This replacement frame cover restores the support and trim for the refrigerator vegetable crisper area, keeping produce contained and allowing the crisper pan to sit securely. Fits the corresponding crisper/veg pan opening. What it does

• Replaces a cracked, warped, or missing crisper frame cover to restore proper fit and appearance
• Helps keep produce from spilling into the crisper pan and supports the drawer/grille assembly
• Stops rattling or misalignment caused by a broken or loose cover
• Maintains the intended cabinet trim where the crisper/vegetable pan sits

• Disconnect power to the refrigerator before servicing
• Remove produce and the crisper drawer before replacing the cover
• Inspect mating surfaces for debris or damage and seat the cover fully into place