General Electric Refrigerator Drawer, Shelf, Pan

This shelf cant is the replacement cantilever-style support that secures refrigerator shelves in place, restoring stable shelf positioning and preventing shelves from tilting or sliding. Designed to fit the OEM mounting points and match original shelf alignment. What it does:

• Provides a secure support point for a refrigerator shelf so items stay level and don't shift.
• Restores proper shelf engagement when the original cant is cracked, worn, or broken.
• Helps eliminate sagging, tilting, or uneven shelves that can cause items to slide.
• Works with the existing shelf hardware and track to re-establish factory shelf stability.

• One shelf cant (exact OEM quantity: 1)

• Basic hand tools are typically required; remove stored items and the shelf before replacing.
• Align the cant with the shelf track and snap or fasten into the original mounting position per OEM alignment.
• Inspect adjacent shelf supports and tracks for wear; replace any damaged parts to ensure secure installation.
• Unplug power or follow appliance safety recommendations if working near electrical controls or lights.

Replacement shelf slideout assembly that restores smooth in-and-out movement for a refrigerator shelf, improving access to stored items and preventing binding or unexpected drops. Designed as a direct-fit shelf slide mechanism. What it does:

• Guides and supports the shelf so it slides smoothly on its rails.
• Replaces worn, cracked, or bent slide rails that cause binding or uneven movement.
• Helps prevent the shelf from falling forward or coming off the track when pulled.
• Can resolve symptoms like stuck or wobbly shelves, noisy sliding, or a shelf that won't stay aligned.

• One shelf slideout assembly.

• Disconnect power to the appliance before starting any work; remove items from the shelf and handle glass carefully.
• Remove the old slide assembly by releasing retaining clips or screws, then slide the new assembly into place until it locks; use only the hardware explicitly required.
• If the shelf is glass, support it while reinstalling and avoid overtightening fasteners.

This cover pan assembly is the molded drain tray that routes defrost and condensation water to the refrigerator drain, helping keep the cabinet base dry and protecting internal components from moisture damage. What it does:

• Collects and channels defrost/condensation water into the drain system to prevent pooling
• Protects compressor and electrical components from water exposure
• Helps reduce musty odors and water stains caused by leaks under the cabinet
• Restores proper water flow if a cracked or warped pan was causing spills

• One cover pan assembly as shown

• Disconnect power to the appliance before beginning any work
• Access may require removing the rear or lower front kick plate depending on model
• Handle plastic mounting tabs carefully to avoid breakage; replace any damaged clips
• Inspect and clear the drain tube and trough while installing to ensure proper flow

This shelf slideout assembly replaces a worn or broken slide mechanism so a refrigerator shelf glides smoothly in and out for easier access and safer storage. Fits the factory shelf track to restore normal shelf movement. What it does:

• Replaces the slide mechanism that guides a refrigerator shelf in and out
• Restores smooth, aligned shelf movement and helps prevent shelves from sticking or falling
• Reduces shelf wobble and uneven travel that can make loading difficult
• Commonly used when the existing slide is cracked, bent, or no longer secures the shelf

• One shelf slideout assembly

• High-level replacement: remove shelf, lift out the old slide assembly, and snap or screw the new slide into the same mounting points
• Keep shelves and contents clear before starting to avoid damage or injury
• If screws or clips appear stripped or missing, replace them with OEM equivalents for secure fit
• Disconnect power only if required by your model's service instructions; follow the refrigerator manufacturer's safety guidance

This is a replacement shelf chiller for the refrigerator chiller compartment — a single shelf that restores proper storage space and helps keep chilled items organized and cooler. Fits into the designated chiller shelf supports. What it does

• Provides a stable surface for storing chilled items in the refrigerator chiller compartment
• Restores usable shelf space after a cracked, chipped, or missing chiller shelf
• Helps maintain proper airflow around stored items when installed correctly
• Reduces the risk of spills by replacing damaged shelving

• One shelf chiller

• Disconnect power to the appliance before removing or installing shelves to avoid injury
• Remove all items from the chiller area and carefully slide old shelf out along its supports
• Align shelf with the chiller shelf supports and gently set into place; ensure it is seated and level
• Handle with care to avoid chipping or cracking; wear gloves if glass or sharp edges are present

This encap shelf assembly is an encapsulated glass refrigerator shelf that restores a stable, easy-to-clean storage surface and helps contain spills. Replaces damaged or missing shelves to improve organization and safe food storage. What it does:

• Provides a flat, sturdy surface for groceries and containers.
• Encapsulated edge design helps contain spills and keeps items from sliding off.
• Replaces cracked, chipped or sagging shelves that can't support weight safely.
• Restores proper spacing and organization inside the fresh-food compartment.

• One encap shelf assembly

• Remove all food and containers before replacing the shelf.
• Wear cut-resistant gloves when handling glass; protect surfaces from breakage.
• Support the shelf while sliding into the shelf tracks or brackets to avoid damage.
• Confirm proper fit and seating in the tracks before loading with items.

This big wire shelf provides a sturdy, open storage surface that improves airflow and organization inside your refrigerator. It replaces a missing, bent, or damaged shelf so you can restore usable storage space. What it does:

• Supports food and containers on a durable wire grid that resists sagging
• Open-wire design promotes cold air circulation for more even cooling
• Replaces shelves that are bent, rusted, or have broken mounting points
• Fits into existing shelf tracks or clips to secure items during normal use

• One big wire shelf

• Remove food and any adjacent shelves or drawers before installing
• Slide or snap the shelf into the refrigerator's existing shelf supports; confirm both sides are seated
• Use caution to avoid sharp wire edges; wear gloves if needed
• If shelf mounting hardware is damaged, inspect and replace mounting supports before use

This adjustable freezer shelf provides a stable, reconfigurable surface to organize frozen foods and maximize storage. It replaces a damaged or missing shelf to restore proper spacing and holding capacity in the freezer compartment. What it does:

• Supports frozen food containers, boxes and bags while keeping items elevated and organized
• Allows height adjustment to accommodate taller or bulkier items
• Replaces cracked, warped or missing freezer shelving that can no longer hold items securely
• Helps prevent items from sliding or shifting when the door is opened

• One adjustable freezer shelf

• Remove all items from the shelf area before installation
• Slide shelf into the existing support channels or brackets until it seats securely
• No special tools typically required; handle glass or coated surfaces carefully to avoid damage