General Electric Refrigerator Drawer, Shelf, Pan

This support slide secures and guides a refrigerator freezer basket so it opens and closes smoothly and stays aligned. It replaces worn or broken slides to restore proper basket support and movement. What it does:

• Guides the basket along its track for smooth in-and-out motion
• Helps keep the basket level and prevents it from sagging or tilting
• Replaces damaged or worn slide hardware that can cause sticking or uneven travel
• Addresses symptoms like a basket that won't slide smoothly, drops, or misaligns

• One support slide

• Turn off power to the appliance and remove stored items from the basket before starting
• Compare the old slide to the new one to confirm orientation and mounting points
• Install by aligning the slide with the mounting points and securing per OEM fastener locations

This slide and bracket assembly replaces a worn or broken refrigerator drawer slide to restore smooth opening and secure drawer support. Designed to align and guide the drawer while preventing sagging or binding. What it does:

• Replaces the drawer slide and mounting bracket so the drawer glides correctly
• Supports the weight of the drawer and its contents to prevent sagging
• Helps stop sticking, rough movement, or misalignment when opening/closing the drawer
• Restores proper drawer tracking for full insertion and removal

• One slide and bracket assembly

• Intended for refrigerator drawer application; verify fit against your OEM part number before ordering
• Basic hand tools required; follow manufacturer's service manual for access and removal steps
• Disconnect power or unplug the appliance if accessing electrical components nearby
• If fasteners or clips are damaged, replace them with OEM-specified hardware

This slide holder kit secures and guides a refrigerator shelf or drawer slide, restoring smooth movement and stable shelf support. It replaces worn or broken slide components to help shelves track properly and reduce slipping. What it does:

• Replaces the refrigerator slide holder that supports shelf/drawer movement
• Restores stable tracking for shelves or drawers that stick, tilt, or fall out of alignment
• Helps reduce wobble and prevents shelves/drawers from slipping forward
• Designed as a direct-fit replacement for the corresponding OEM slide assembly

• Disconnect power to the appliance before starting any repair
• Typically installs with basic hand tools; remove the affected shelf/drawer to access the slide
• Inspect mating parts (track and mounting points) for damage and clean before reinstalling

This shelf slideout assembly replaces a worn or broken slide mechanism so a refrigerator shelf glides smoothly in and out for easier access and safer storage. Fits the factory shelf track to restore normal shelf movement. What it does:

• Replaces the slide mechanism that guides a refrigerator shelf in and out
• Restores smooth, aligned shelf movement and helps prevent shelves from sticking or falling
• Reduces shelf wobble and uneven travel that can make loading difficult
• Commonly used when the existing slide is cracked, bent, or no longer secures the shelf

• One shelf slideout assembly

• High-level replacement: remove shelf, lift out the old slide assembly, and snap or screw the new slide into the same mounting points
• Keep shelves and contents clear before starting to avoid damage or injury
• If screws or clips appear stripped or missing, replace them with OEM equivalents for secure fit
• Disconnect power only if required by your model's service instructions; follow the refrigerator manufacturer's safety guidance

A right-hand slide basket that restores smooth support and guided movement for a refrigerator drawer. Replaces a damaged or worn slide assembly so the basket stays aligned and operates without binding. What it does

• Provides the right-side sliding support for a refrigerator shelf/drawer, keeping the drawer aligned as it opens and closes
• Replaces broken, bent, or worn slide hardware that causes scraping, binding, or a drawer that falls out of track
• Helps restore smooth travel and load-bearing for everyday use
• Fits into factory mounting points and works with the factory left/right counterpart when both are present

• One right-hand slide basket assembly

• Disconnect power to the appliance or unplug the refrigerator before starting service to avoid electrical hazard
• Empty the drawer and remove adjacent shelves or trim to access mounting points as needed
• Use basic hand tools; support the drawer while removing and installing the slide to prevent drops or damage

This shelf support secures an interior refrigerator shelf in place so food items stay level and storage remains organized. It replaces a cracked or worn support to restore proper shelf seating and stability. What it does

• Holds a refrigerator shelf or shelf trim in the correct position to prevent sagging or tipping
• Restores stable support for glass or wire shelving that no longer stays seated
• Helps eliminate shelf movement that can cause items to slide or spill
• Works where a broken, chipped, or missing support prevents proper shelf alignment

• Disconnect power to the appliance before starting any repair and empty the shelf area
• Remove the affected shelf or trim to access the support; reinstall shelf to confirm correct seating
• Use basic hand tools as needed and avoid forcing parts to prevent further damage
• Replace all affected pieces for consistent shelf alignment

A center bearing slide that restores smooth, stable movement for your appliance drawer. Replaces a worn or broken center slide to reduce sticking and keep the drawer aligned for normal opening and closing. What it does:

• Provides a low-friction bearing surface so the drawer glides smoothly on its track
• Keeps the center of the drawer supported to prevent sagging or tipping
• Helps stop drawers from sticking, binding, or coming off their tracks
• Works with existing side slides and hardware to restore proper alignment

• Turn off and unplug the appliance before starting any repair
• Remove the drawer and inspect adjacent slides and clips for damage before installing
• Align the center slide with the drawer and track; secure using existing or OEM fasteners
• Replace damaged slides or clips to ensure proper operation

This slide bearing pan is the replacement plastic support that helps a refrigerator drawer glide smoothly and stay aligned. It restores proper drawer movement and prevents catching or uneven travel. What it does:

• Supports the drawer slide assembly so the drawer opens and closes evenly
• Reduces friction and rubbing that can cause sticking or squeaking
• Keeps the drawer aligned to prevent tipping or falling out
• Helps restore smooth operation when worn or damaged bearings cause rough movement

• Disconnect power to the appliance or unplug the refrigerator before starting work.
• Remove the drawer and old slide components to access the damaged bearing pan.
• Snap or slide the replacement pan into the slide track per OEM alignment; replace drawer and test movement.
• If other slide hardware is damaged or bent, replace those components for reliable operation.