Need Help?
Call or text
Burner not heating or intermittently going out? This large surface element restores consistent cooking heat. Simple 5-minute DIY replacement. Video included.
I wasn't sure if it was the heating element surface, the receptacle or the switch. My wife does some canning so it had some good use. It turned out to be the receptacle. I purchased the element as well thinking it needed replaced anyway. All works now. All three items are/would be easy to change. Read more
Replace a non-heating or damaged 6-inch burner. Simple plug-in installation takes minutes—just unplug the old element and connect the new one.
Burners were an exact match for the originals and the pans fit perfectly. Vastly improved the appearance of an old cook top and allowed us to to not have to replace it before our home goes up for sale. Read more
Burner won't heat or work? This radiant surface element restores your cooktop. Easy DIY fix in about 20 minutes with basic tools. Fits many models.
I easily unplugged the oven and unscrewed the top and those burners and replaced with new one. I plugged it back and tested them. both are working perfectly now. it was very easy and i did not have to pay for technician and labor. Read more
The Radiant Element is an OEM part for GE ranges and cooktops. This part provides efficient and even heating for cooking. This part uses electricity to heat up and transfer warmth directly to the cookware. The radiant element is encased under the glass surface of the cooktop, offering a sleek and easy-to-clean cooking area while ensuring optimal heat distribution and cooking performance.
Causes of failure might include a burnt-out heating coil, damage to the element's electrical connections, or a malfunction within the control system that regulates power to the element.
Symptoms of a bad Radiant Element include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Stove is a GE Adora Model JBP63HH2bb. It took me forever to figure out how the burner was attached to the rails. My glass top was different than any instructions found on the internet for changing out a burner. The burners on this one are held to the bottom of the glass cook top by two rails that cross the bottom of the burner assemblies. In order to get too the burners you must remove 4 Phillips screws to lower the rails and burners from the cooktop. I suggest two people do this because... Read more
Burner not heating or won't turn on? This radiant heating element restores heat to your cooktop. DIY-friendly repair takes about 10 minutes to install.
I purchased the replacement part after seeing how easy it was to fix by watching videos online. Read more
Oven not heating or preheating? A failed bake element prevents proper baking temperatures. Simple 5-10 minute replacement with basic tools.
My oven element "melted away" on a Saturday evening. I couldn't find any parts locally on Sunday so that left me until Monday with no oven. On Monday, I had the option of buying one locally for $70+ dollars or go online. I've dealt with AppliancePartsPros before and they've always delivered so I took the chance and put an order in. I had the part Tuesday afternoon without driving anywhere and for only $54... in less than 30 hours after I ordered it! WOW! It took almost no time to install... Read more
The Bake Element is an OEM part for GE wall ovens and ranges. It generates the necessary heat through a series of exposed coils to bake and brown food consistently. Symptoms of a failed bake element include:
Causes may be normal wear of the coil material over many use cycles in high heat. Without a functioning bake element, the oven cannot reliably or safely perform its baking function. This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
Replaced element. The new element was perfect. The shipping was perfect. Installation would have taken less than 10 minutes if the two range wires attaching to element had been 1 inch longer. Attached thin nosed vice grips to wires at spade terminals to facilitate attachment to element. The repair was simple enough but it would have been perfect if GE engineers had made wires 1 inch longer. Read more
If your oven won't heat or the bake element burned out, this replacement part restores proper baking. Easy 10-minute DIY install—unplug & swap.
Checking for part replacement.....found your website.....I thought I had the right part, but called the tech/order line. Spoke to a very knowledgable tech, which she checked the stove serial # vs the part I thought I could use. The Tech advised that it WAS NOT and related the findings. I agreed after a short discussion and ordered the new element. The order was placed on Monday afternoon, on TUESDAY the FEDX truck pulled in with the replacement element!!!!!!! I watched the video offered on... Read more
Oven not heating or baking unevenly? This bake element restores proper heat. Simple 5-minute screw-in install with basic tools. Fits select GE ranges.
With the help of Wendee and Karen, we finally figured out my model numbers and which parts where correct. I ordered the parts and all arrived the next day except for the Broiler element which arrived in 2 days. I installed the new Baking Element myself. Took longer to figure out which curcuit braker to turn off. In about 30 minutes I had a brand new Baking Element in my oven working perfectly. On the following day, I installed the Broiler Element. That took a bit longer as it sits in a metal... Read more
Broil element not heating or burned out? This upper oven heating element restores broiling function. Easy DIY repair—remove 4 screws and reconnect wires.
I fallow instruction by watching video Read more
Stovetop burner not heating? This surface heating element generates heat for cooking. Simple plug-in replacement—pull out old, plug in new.
I lifted the front hood and removed the back control panel cover. I then replaced two terminal blocks with the new kits. Perfect match except wires were a bit long. So I rolled them up neatly and tucked them away at the control center. Used electrical tape to band both sets of wire and protect them from the metal edges between the range and control area. I replaced the control cover and installed two new burners. Perfect installation. Read more
Replace a non-heating or weak 8-inch surface burner with this radiant element. Requires lifting the cooktop and Torx screwdriver. Moderate DIY repair.
I ordered the 8 inch Haliant Element from Appliance Parts Pro with overnight shipping (I needed to have it working for Easter weekend!) and it arrived when promised and in perfect condition! To replace, you need a couple of boards longer than the stove is wide to hold the stove above the counter. You will also need a T15 Torx head on a handle or socket wrench. It also helps to have some pliers, and a second person to slip the boards under and out from the stove when you lift it. First, shut... Read more
Fix a warm fridge or freezer ice buildup. This defrost heater melts frost on evaporator coils to restore cooling. Moderate DIY repair, 1-2 hours.
Replaced defrost heater, temperature and defrost limiter thermostat. After taking the cover off the air chiller I found the coils frozen solid and defrosted it with a hair dryer. Once defrosted I remover the heater coil to test it it was fine, then I could see the defrost limiter was broken and as I put the unit back together I broke the heater tube (it is glass) so I ordered all the parts that might be defective and replaced them for less than the charge of having some one come to check it out. Read more
Burner not heating? This 5.5" radiant element fits beneath glass cooktops. Common fix for non-working burners. Moderate DIY, 20-30 minutes to replace.
Raised ceramic top, removed old element, installed the new one. Read more
This 8-inch drip bowl sits beneath the surface coil on your range to catch spills and support the element. Replacing a rusted or stained bowl refreshes the cooktop and helps the coil sit level for reliable heating.
Ordered a replacement burner from Appliance Parts Pros. Read more
Burner not heating or glowing red at all settings? This surface heating element restores stovetop heat. Easy DIY fix with basic tools in 10 minutes.
The heating element contact ears and the terminal block contacts were burnt on the existing burner. I ordered the new terminal block kit and surface heating element from Appliance Parts Pros. Delivery was exceptionally fast (I just used regular shipping). The new terminal block kit came with very long wires, so I cut them and installed new terminal ends, rather than zip-tie the long wires together. Very happy with repair. Read more