Hose, Tube & Fitting

This part is a replacement grease fitting. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. If the current grease fitting is defective or broken, this part can be used as a replacement. It is intended for use with a variety of chipper models.The grease fitting feeds lubricants into the equipment's bearings. This part will require replacement with a genuine OEM part if broken, detached, or rendered ineffective in any way. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this grease fitting, the appropriate owner's manual and equipment diagrams should be referred to. This grease fitting is suitable for use on a variety of chipper models manufactured by MTD, Craftsman, Troy-Bilt, and other brands. It is a genuine OEM part and thus is made of high-quality, durable materials. Part sold individually.

This is a fuel line assembly that is made to be used in Craftsman and MTD string trimmers. It is composed of strong black and white plastic. The fuel line takes extra fuel and brings it to the fuel tank when the primer bulb has been engaged and the carburetor is primed. Time and regular use can lead to clogging or cracks in the fuel line assembly, which can lead to serious engine issues. If these problems are present, the fuel line assembly needs to be replaced.Make sure to drain any gasoline out of the fuel tank and disconnect the spark plug wire before starting the replacement process. Remove the original line from the carburetor and fuel tank before attaching the new line and using the string trimmer.This fuel line assembly is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The fuel line is made for use with string trimmers manufactured by Craftsman and MTD.

This flex tube is a genuine MTD part sourced directly from the manufacturer. It is made as a replacement part for blowers. Especially since it is made of plastic, it is normal for it to need replacement from extended wear and tear.This is a relatively easy repair, although some disassembly of the engine and the equipment is required. To replace the flex tube on a blower, allow the engine to cool completely, disconnect the spark plug to prevent the equipment from accidentally powering on, and empty the fuel tank. Next, detach the blower nzle and extension tube. Loosen and remove the swivel blower tube, detach the cable clip, and remove the screws attaching the original flex tube. Replace the flex tube. Before ordering, inspect the blower to see if new screws are also needed.This flex tube is a genuine OEM part sourced directly from the manufacturer. It is compatible with machines made by Craftsman, Murray, Remington, MTD, Troy-Bilt, and Yard-Man. It is sold individually.

This replacement part is a lawn hose. It is a genuine replacement part made by MTD. This lawn hose is similar to a vacuum hose in that it is able to collect leaves and other debris and dispose of them into the collection bag. This makes it easier for the user to dispose of the items rather than use another device such as a leaf blower. A new lawn hose might be needed if the user notices the current one is not as effective as before. If the hose is unable to connect it might be time to replace it. It is also possible that the hose can become worn down or damaged over time and will not be able to effectively collect debris using the suction force. This is a genuine OEM replacement part and is sourced directly from the manufacturer and is sold individually.

This authentic OEM replacement part is a fuel line kit for a lawn mower. The fuel line is arguably the first stage in a combustion engine. Before the engine can ever start, fuel first has to come from the tank to the carburetor via the fuel line. The fuel line runs from the inside of a fuel tank and into the carburetor. It attaches to the side of the lawn mower using two small metal clamps. Fuel lines are almost always made of either vinyl or rubber and, because of their location on the outside of the lawn mower, they can easily snag on something and tear. If the fuel line tears, gasoline will begin leaking from the fuel tank and pose a potential fire risk. Fortunately, changing out a fuel line is easy. With a pair of needle-nose pliers, pull the damaged fuel line from the carburetor and out through the fuel tank. Reinsert the new line and clamp it down to the mower. This high-quality part is compatible with MTD, Cub Cadet, Yard Man, Troy-Bilt, Bolens, and Yard Machines lawn mowers. It is sourced from the original manufacturer and includes a hose and two metal clamps.

This replacement part is a nzle assembly. This is a genuine replacement part made by MTD. Nzle assembly and is used in different machines and appliances. The nzle is able to open and close when needed based on the user's desired settings. A new nzle assembly might be needed if the current one is damaged or missing. This can be from normal wear and tear over time. The nzle is susceptible to damage and should be replaced if it is not up to working standard. Work gloves are recommended for this repair as pieces can cause injury. Refer to the user manual for more specific information before attempting to replace this part. This nzle assembly is a genuine OEM replacement part to ensure proper fit. This part is sold individually and is sourced directly from the manufacturer.

This fuel line kit offers a genuine OEM replacement for select models of blowers. The fuel system includes intake and return lines as well as a vent line. These are responsible for moving the fuel throughout the engine between the fuel tank and the carburetor. Over time, the plastic or rubber lines can be damaged or become brittle due to constant exposure to extreme temperatures. If the fuel lines crack or break, they will need to be replaced before the equipment can be used again. It is usually best to replace all fuel lines at the same time, which is what this fuel line kit can do. This genuine replacement fuel line kit is designed for use with select Husqvarna blowers. The fuel line kit includes all fuel intake and outlet lines, the fuel filter, grommet, and primer bulb. It is sold as a single unit and saves the expense of buying all the parts separately. The fuel system should be completely drained before working on or replacing the fuel lines and other components. Allow the engine to cool and use hand and eye protection for safety during all repairs.

This fuel line assembly is created for use with string trimmers and is used to bring gasoline to the small engine in a lawn and garden tool. As the string trimmer is used, the fuel line assembly can start to break down, which may result in cracks in the fuel lines or discoloration. This can cause the fuel line to stop working the way it should, which will affect the performance of the trimmer. If the fuel lines are no longer the correct color or seem brittle, a replacement is likely needed. The line can be pinched to see if there are any visible cracks. In some cases, the primer bulb will no longer seal the way it should and will create more air than expected when priming the trimmer. Another sign that the fuel line assembly is damaged is lower power when someone uses the throttle. This is a genuine OEM part that comes directly from the manufacturer. It is a single part that is designed for use in Troy-Bilt, Craftsman, MTD, and Yard-Man string trimmers. No additional tools are needed to make the replacement.