Hose, Tube & Fitting

This exhaust piping is a genuine OEM replacement part sourced directly from the manufacturer; it is used on tiller engines and other small engines. The exhaust piping is part of the muffler system. It connects to the exhaust manifold. As gas is combusted to run the engine, it is forced out through the exhaust manifold and the exhaust piping. This process heats the pipes for a short period. Over a period of time, this repeated heating can cause the exhaust piping to deteriorate. If this happens, the piping will need to be replaced in order for the exhaust manifold to function correctly. If the engine is experiencing overheating problems, the exhaust pipes will need to be replaced when it is fixed. Overheating will cause them to deteriorate much faster than normal.Allow the engine and exhaust manifold to cool before replacing the exhaust piping. Remove the exhaust pipes from the exhaust manifold. Inspect the manifold for visible signs of damage while the pipes are off. This would be a good time to replace the exhaust manifold gasket. Install the new pipes. The exhaust piping is made of durable black plastic and sold as an individual unit. It is compatible with tillers, chipper shredders, snowblowers, and other small engines manufactured by Cub Cadet, MTD, Troy-Bilt, and Yard Machines.

This part can be used to replace a deteriorating or leaking oil pick-up in chainsaws. An oil pick-up is essential for a smooth-running piece of equipment, as it supplies oil to the engine. Over time, oil pick-ups can become worn, which can cause leaks and prevent the engine from receiving the necessary supply of oil to operate properly. This part is manufactured from high-quality, durable plastic and non-corrosive metal. This assembly pick-up oil tank is a genuine OEM replacement part that has been sourced directly from the manufacturer. This replacement assembly pick-up oil tank fits various different models of Husqvarna and Poulan chainsaws. Please note this part is sold individually.

This J tube is used to attach the vacuum tube to the vacuum bag. In order for the leaf blowers to function correctly, the tubing needs to be in prime condition to seal the air moving through the machine. This will enable full functionality of the blower. It's made of a durable black plastic, and will need to be replaced if cracking or warping is experienced. Exposure to elements as well as general use will lead to a need for replacement over time. Replacement is needed if visible cracks or drying is seen in the tubing, or if noticeable difference in amount of air moving through the vacuum component is hindering full use. Replacement is simple, and doesn't require tools. Separate the old part from housing, and replace it with the new part. This part is compatible with the Poulan and Weed Eater brand leaf blowers and gas powered leaf blowers. The wave washer is an OEM part sourced directly from the manufacturer, and it is sold individually.

This replacement part is a fuel line kit and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This part is used in appliances such as line trimmers and edgers. This part helps the user in determining how much fuel is present in the appliance and if they need to top it off prior to use. A new fuel line kit might be needed if the current one is damaged or missing. Be sure to wear work gloves during this replacement as fuel can get on the hands and become dangerous. Be sure the engine is powered off before attempting this repair. This fuel line kit is sold as a single kit and is sourced directly from the manufacturer. This part is a genuine OEM replacement part.

This part is a replacement upper tube blower. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a faulty or damaged upper tube blower on a variety of leaf blower models. This particular upper tube blower is used with gas powered leaf blowers. This part connects the lower tube to the blower housing. No special tools are required to replace this part. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. For more accurate information on how and where to install this upper tube blower, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this upper tube blower is suitable for use on several different models of leaf blowers manufactured by Husqvarna. This is a genuine part made of high-quality, durable materials and is sold individually.

The breather hose is designed as a valve or vent that only functions one way. It allows air into the fuel tank but ensures that no air or emissions escape the tank. When this hose is not functioning, emissions and air could be leaking from the tank and cause the engine to perform poorly or not perform at all. The hose could become cracked or damaged, or the ends could lose their seal. Either way, a replacement hose will solve the problem and get the equipment back in order. This genuine OEM replacement breather hose is made by MTD and manufactured to exact specifications. It is compatible with several engines on lawn mowers, snowblowers, and chippers from brands like Troy-Bilt, MTD, Yard-Man, Yard Machines, Bolens, Cub Cadet, and Husky. There are more than 150 compatible machines for this breather hose. This high-quality composite rubber hose is sold individually.

This is an OEM primer hose assembly replacement sourced directly from the manufacturer. It is used on various outdoor lawn and garden small engines. The primer hose is inserted into the fuel tank. This hose then connects to a bulb that forces the fuel to the carburetor to start the engine. Excess fuel is forced back into the fuel line. Normal wear and tear can cause the line and primer bulb to become brittle and crack, making it unable to move fuel into the carburetor.A Phillips screwdriver, long-nosed pliers, standard screwdriver, and a pan to drain the fuel are necessary to remove and replace the primer hose assembly. This project can be complete in less than half an hour. Drain the fuel from the fuel tank and fuel lines before starting the project. Remove the rear cover and take the carburetor and fuel lines off the engine. Install the primer hose and primer bulb. Reinstall the parts and fill the fuel tank. Pump the primer bulb to make sure it is installed correctly.This primer hose assembly is made of plastic and rubber and is sold as an individual kit. It is compatible with tillers and other small engines manufactured by MTD, Cub Cadet, and Yard Machines.