Parts for Kenmore Elite 79571079014: Ice Maker / Ice Bin Parts

Replacement mounting screw for refrigerator assembly. Secures components and panels inside your fridge. Order a new screw if yours is stripped or missing.

Replacement mounting screw for refrigerator panels, brackets, and internal assemblies. Restores secure fastening when original screw is missing, stripped, or damaged.

This mounting screw secures panels and small components on compatible LG appliances, restoring fit and stability for loose or rattling parts. A simple replacement that helps prevent further wear and noise from unsecured pieces. What it does

• Fastens trim, panels, brackets or small assemblies to the appliance chassis
• Restores secure fit when original screws are missing, stripped or damaged
• Helps eliminate rattling, vibration noise and misaligned panels
• Works where the original factory screw has corroded or worn

• One mounting screw

• Turn power off and disconnect the appliance before beginning any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug; avoid over-torquing which can strip threads or crack plastic
• Replace with the correct OEM screw rather than forcing

A general-purpose replacement bolt used to secure appliance components and fasten panels. Restores proper fit and helps eliminate movement caused by loose or missing hardware for safer, quieter operation. What it does:

• Fastens panels, brackets, and assemblies to keep parts aligned and secure
• Stops rattling, vibration noise, and loose or shifting components
• Replaces corroded, stripped, or missing bolts that can cause misalignment
• Works where the OEM lists a generic "bolt" or common fastener

• Disconnect power and unplug the appliance before starting any repair
• Use the correct driver or socket to avoid stripping the head
• Replace any associated washers or nuts if damaged; secure to proper tightness without over-torquing
• If threads are damaged, repair or replace the mating hardware to ensure a safe fit

Replacement mounting stud for refrigerator door handles. Installs inside the door to secure handle assembly. Needed when stud is damaged or missing.

Replacement mounting screw for refrigerator panels, brackets, and assemblies. Needed when original fastener is stripped, worn, or missing.

Taptite screw for securing components inside your refrigerator. Replaces lost, stripped, or corroded fasteners during repairs or reassembly.

Lower cover assembly for bottom-mount refrigerators. Replaces cracked, broken, or missing lower covers. Installs at the base of the refrigerator.

This rear door handle replaces a worn or damaged handle on compatible LG appliances, restoring a secure grip and smooth opening. It's a direct-fit exterior handle that keeps the appliance door operating and looking right. What it does

• Provides a secure gripping point to open and close the appliance door
• Replaces cracked, loose, or broken rear handle hardware
• Restores correct alignment and feel when the door is operated
• Helps prevent further damage to the door edge from makeshift handles

• Power off and unplug the appliance before starting work; remove food or shelves as needed for access
• Keep fasteners and mounting clips; transfer original hardware unless new hardware is explicitly included
• Test door operation and alignment after installation; tighten fasteners evenly to avoid stress

Fix water pooling under your refrigerator with this drain tube assembly. Replaces cracked or clogged tubes to restore proper drainage. Straightforward repair.

Adjustable leveling leg that threads into the refrigerator base frame to support and stabilize the unit. Replace worn, broken, or missing legs.

Multi-duct assembly for refrigerators. Replaces cracked, broken, or missing duct housing that directs airflow between compartments. Direct fit part.

Multi-flow air duct assembly for bottom-mount refrigerators. Replaces cracked, broken, or damaged ducts that direct airflow between compartments.

Replacement ice cube tray for your refrigerator freezer. Holds water in molded cavities to form ice cubes. Replace if cracked, broken, or missing.

Replacement drawer tray assembly for your refrigerator. Installs in the fresh food or freezer compartment. Needed when original is cracked or broken.

Replacement glass shelf assembly for refrigerators. Installs inside the fresh food compartment. Needed when original shelf is cracked, broken, or worn.

Replace your broken or cracked refrigerator glass shelf. This tempered glass shelf installs in the fresh food compartment to organize food items.

Air duct connector for refrigerators. Channels airflow between compartments. Replace if cracked, broken, or missing to restore proper air circulation.

Secures and supports shelves inside your refrigerator. Replace if cracked, broken, or missing to properly hold shelves in place and restore stability.

Multi duct assembly for refrigerators. Directs airflow between compartments. Replace if cracked, broken, or missing to restore proper air distribution.

This guide assembly is a chassis alignment and support piece that helps hold and position internal TV components for proper fit and operation. Replacing a damaged guide restores secure mounting and reduces panel or board movement. What it does:

• Secures and aligns internal TV modules or boards to the cabinet
• Prevents rubbing, vibration noise, and intermittent contact from loose parts
• Helps keep the display and internal assemblies correctly spaced for reliable operation
• Useful when cracked, warped, or broken guides cause misalignment or rattling

• One guide assembly as shown

• Unplug the TV and remove power/antenna cables before starting
• Ground yourself to protect against static-sensitive components
• Use original screws and fasteners; inspect adjacent tabs and mounts for damage during installation

Replaces worn or broken slide rail that supports refrigerator drawer movement. Restores proper alignment for smooth, quiet gliding along the track.

This guide assembly is a factory-style mounting guide used in TV chassis to position and support internal components, helping maintain correct alignment and stable operation during use and service. What it does:

• Provides a mounting and alignment point for internal TV components to keep assemblies stable
• Helps maintain proper spacing between parts to prevent rubbing, misalignment, or rattling noises
• Can restore correct fit where a damaged or worn guide causes loose panels or shifting components
• Useful when repairing or replacing adjacent parts that rely on the guide for proper positioning

• Guide assembly

• Disconnect power and remove the TV from its wall mount or stand before servicing
• Handle the panel and internal boards carefully to avoid damage; use non-marring tools
• Keep track of all screws and grounding hardware removed during disassembly for reassembly

Rail guide assembly for refrigerator or freezer drawers. Guides and supports the slide rail for smooth drawer movement. Replace if worn, cracked, or broken.

Magnetic door gasket that seals the refrigerator or freezer door to maintain cold temperatures and prevent frost buildup. Replace if door doesn't seal, frost accumulates, or gasket is torn.

A replacement hinge cover that hides and protects the door hinge hardware for a clean look and safer operation. Restores a finished appearance and keeps fingers or clothing from catching on exposed hinge parts. What it does:

• Covers and protects exposed hinge components from dirt and damage
• Keeps hinge hardware out of sight for improved appearance
• Reduces the chance of clothing or fingers catching on the hinge
• Helps maintain smooth door movement by protecting hinge area from debris

• Disconnect power to the appliance before attempting any repair; also shut off water supply if working on a unit with water connections.
• Remove any trim or screws securing the old cover; this part typically snaps or screws into place — keep hardware if reusing.
• Wear gloves to protect hands from sharp edges and to avoid cosmetic damage to the cover.

Covers and conceals the door hinge on your bottom-mount refrigerator. Replace if cracked, broken, or missing to restore a clean, finished look.

Restores tight door seal to prevent leaks and maintain consistent temperatures. Replace when seal is cracked, torn, or no longer sealing properly.

Restores a tight seal around your refrigerator door to keep cold air in and warm air out. Replace when worn, torn, or cracked to maintain efficiency.

The Mullion Flipper Assembly is an OEM part for LG refrigerators. This assembly, located between the refrigerator doors, helps seal the space between the doors when they are closed, improving energy efficiency by preventing cold air from escaping.

Causes of a bad mullion flipper assembly can include wear and tear over time, damage from frequent opening and closing of the doors, or issues with the hinges and connectors that secure it in place. A damaged or malfunctioning mullion flipper can lead to temperature inconsistencies and increased energy usage.

Symptoms of a bad mullion flipper assembly include:

• Visible damage or wear on the assembly
• Cold air escaping from between the refrigerator doors
• Increased frost buildup inside the refrigerator
• Higher energy bills due to the appliance working harder to maintain temperature

This OEM LG part is also compatible with Sears/Kenmore models.

Replacement drawer guide for bottom-mount refrigerators. Restores smooth tracking and alignment when original is cracked, broken, or worn. Installs inside drawer cavity.

Replace your cracked, broken, or missing refrigerator door basket. Restores secure storage for bottles, jars, and condiments on the inner door.

Door basket assembly mounts to refrigerator door for secure storage of bottles, jars, and condiments. Replace cracked, loose, or missing bins.

Door basket assembly mounts to refrigerator door for secure storage of bottles, jars, and condiments. Replace cracked, loose, or missing bins.

Door basket assembly mounts to refrigerator door for secure storage of bottles, jars, and condiments. Replace cracked, loose, or missing bins.

Door stopper assembly cushions and limits refrigerator door travel. Replaces cracked, broken, or worn stoppers causing misalignment or door slamming.

Door stopper assembly for bottom-mount refrigerators. Installs on door to limit opening angle and prevent damage. Replace if cracked, broken, or missing.

Hinge assembly for refrigerator doors. Installs at door pivot point to support door weight and enable smooth opening/closing. Replace if cracked or worn.

The Lower Refrigerator Door Hinge is an OEM part for LG refrigerators, designed to support and pivot the refrigerator door, allowing it to open and close smoothly. This hinge is a critical component for the proper alignment and function of the door, ensuring an airtight seal when closed to maintain the internal temperature and efficiency of the refrigerator.

Causes of damage to the lower refrigerator door hinge often include normal wear and tear, excessive force when opening or closing the door, or corrosion due to moisture and cleaning agents. 

Symptoms of a bad Lower Refrigerator Door Hinge include:

• Difficulty in opening or closing the refrigerator door.
• A door that hangs unevenly or does not close properly
• Unusual noises during door operation 
• Visible wear or damage to the hinge itself.

This OEM LG part is also compatible with some Kenmore models.

Connector assembly for refrigerators. Installs to join electrical components. Replace if cracked, broken, or connection points are worn or damaged.

Connector assembly for refrigerators. Installs to join electrical components. Replace if cracked, broken, or connection points are worn or damaged.

Shelf rail holder that secures and supports refrigerator shelves. Replace if cracked, broken, or missing to restore proper shelf alignment and stability.

Shelf rail holder for bottom-mount refrigerators. Secures sliding shelves in place. Replace if cracked, broken, or missing to restore proper shelf support.

Replace a worn or broken freezer drawer bar connector assembly to restore smooth gliding and proper alignment. Confirm fit with your model number.

Replacement door hinge for bottom-mount refrigerators. Installs on the cabinet to support and pivot the door. Needed when hinge is cracked or broken.

Specialized spanner tool for turning slotted nuts and collars on refrigerator components. Replace if lost, worn, or damaged to safely adjust fittings.

Replacement ring for your refrigerator. Installs on internal components to secure or seal parts. Order a new ring if yours is cracked or missing.

Refrigerator mullion door won't close or seal properly? This spring operates the center divider flapper door. DIY-friendly installation in 5 minutes.

Upper door hinge assembly for bottom-mount refrigerators. Mounts at the top of the cabinet to support the door. Replace if cracked, broken, or lost.

Right side upper hinge.

Ice dispenser not working or leaking cold air? This ice chute door guides ice from bin to dispenser and maintains proper insulation seals.

This lever holder is the replacement mounting bracket that secures the door lever so the microwave door operates smoothly and reliably. It restores proper lever alignment to help the door latch and release as intended. What it does:

• Secures the door lever assembly so the door can latch and release properly
• Keeps the lever aligned to prevent binding, sticking, or loose movement
• Helps restore normal door operation and user access to the oven cavity
• Common symptom: door feels loose, lever moves freely, or door will not latch

• Disconnect power before beginning any repair to avoid shock or injury
• Remove the outer cabinet or door trim only as needed to access the lever area
• Handle door components and glass carefully to avoid damage or injury

Ice chute door not opening fully? This dispenser door link connects the actuator to the door for smooth operation. Simple DIY fix for binding doors.

This holder bracket secures internal refrigerator components in place. Replace if your original bracket is cracked, broken, or missing to restore stability.

Spring for the ice door lever mechanism in your refrigerator's dispenser. Replace if the spring is stretched, broken, or missing and the ice door won't stay closed.

Fixes unresponsive control panel, blank display, or non-working touchpad on your refrigerator. This display power control board restores interface functionality.

Refrigerator not cooling or freezer warm? The compressor assembly circulates refrigerant to maintain temperature. Professional installation recommended.

Fix a refrigerator that won't cool or start with this compressor start device. Works with the PTC thermistor to help your compressor run properly.

Refrigerator stopped cooling after power outage? The compressor overload protector prevents overheating damage. Easy DIY fix when compressor won't run.

Protective cover for the PTC start relay on your refrigerator compressor. Replace if cracked, broken, or missing to shield relay components from damage.

Fix a refrigerator not cooling properly with this compressor sealing pipe. Essential sealed system component for restoring proper refrigeration.

Front cover panel for your refrigerator door. Snaps into place to restore appearance and protect controls. Replace if cracked, broken, or missing clips.

This is a small retainer clip that secures the compressor in place at the base of the refrigerator. It helps prevent the compressor from shifting or vibrating excessively during operation. Replace this clip if your refrigerator produces unusual rattling or vibrating noises from the back, or if the compressor appears loose or has shifted from its mounting position.

Support roller that mounts to the refrigerator base, allowing the unit to roll for cleaning or service. Replace if worn, broken, or causing uneven positioning.

Fix refrigerator not cooling properly or running constantly with a new drier assembly. Removes moisture from refrigerant. Requires EPA-certified technician.

Refrigerator drip tray that collects water and condensation beneath the appliance. Replace if your drip tray is cracked, warped, or missing.

This condenser assembly replaces the condenser wiring and support used in compatible refrigerators to restore proper condenser connections and airflow. It helps re-establish electrical routing and secure mounting so the cooling system can run reliably. What it does:

• Replaces damaged or corroded condenser wiring and associated mounting hardware
• Restores electrical connection between condenser components and the control circuitry
• Helps resolve symptoms such as cooling loss, intermittent compressor operation, or visible wiring damage
• Maintains proper condenser positioning for adequate airflow and heat dissipation

• Disconnect power and unplug the appliance before starting work
• Inspect surrounding components (fan, compressor, terminals) for related damage
• Use manufacturer-recommended torque and routing to avoid pinched wires

The Fan Assembly is an OEM part for LG refrigerators. It is responsible for circulating air within the refrigerator and freezer compartments, ensuring consistent cooling and optimal temperature distribution. The fan assembly helps maintain the freshness of your food by evenly distributing cold air.

Common causes of a bad fan assembly include electrical issues, worn-out bearings, or obstructions that prevent the fan from spinning properly.

Symptoms of a bad fan assembly include:

• Unusual noises coming from the refrigerator
• Inconsistent temperatures within the fridge or freezer
• Frost buildup in the freezer
• Refrigerator running continuously or not cooling effectively

This OEM LG part is also compatible with Sears/Kenmore models.

Fix poor cooling or uneven temperatures with this refrigerator fan grill assembly. Restores proper airflow and protects the fan from debris.

Fix error code ER DH or ice buildup in your freezer with a new defrost control assembly. Regulates defrost cycles to prevent frost. Moderate DIY repair.

The Door Switch is an OEM part for LG refrigerators. It is responsible for detecting whether the refrigerator door is open or closed, allowing the appliance to control the interior light and, in some models, the cooling functions accordingly.

Causes of a bad door switch can include wear and tear from frequent use, electrical issues, or physical damage to the switch mechanism. A faulty door switch can lead to improper operation of the refrigerator's light or cooling system, affecting overall performance.

Symptoms of a bad door switch include:

• Interior light not turning on or off properly
• Refrigerator not cooling properly or running continuously
• Door alarm not functioning correctly
• Intermittent or unresponsive switch operation

This OEM LG part is also compatible with Sears/Kenmore.

Fix a stuck or non-working ice/water dispenser with this micro switch. Common cause of dispensers running continuously or not activating. Easy DIY repair.

Refrigerator not cooling evenly or making noise? This DC fan motor restores proper airflow when your circulation fan fails or runs intermittently.

Refrigerator not cooling evenly or freezer too warm? A failed DC motor stops air circulation. This motor ensures proper airflow for consistent temps.

This motor bracket secures and aligns the appliance motor, providing stable mounting and helping reduce vibration for reliable operation. It's a direct-fit replacement when the existing motor mount is cracked, bent, or loose. What it does:

• Provides a fixed mounting point to keep the motor properly aligned with the drive system
• Dampens movement to reduce vibration and noise during operation
• Prevents motor shift that can cause belt misalignment or rubbing
• Restores secure fastener locations for reliable motor performance

• One motor bracket

• Disconnect power (and water, if applicable) before beginning any repairs
• Use the original fasteners or OEM-equivalent hardware to secure the bracket
• After installation, verify motor alignment and run a test cycle to ensure quiet, vibration-free operation

This motor bracket secures the appliance motor to the cabinet, keeping the motor aligned and stable for reliable operation. It's a direct-fit replacement when the original bracket is cracked, bent, or missing. What it does:

• Provides a secure mounting point to hold the motor in proper position
• Maintains motor alignment to prevent vibration, noise, or premature wear
• Helps ensure attachments (pulleys, fans, or gears) stay correctly engaged
• Commonly replaced when the bracket is damaged, rusted, or deformed

• Disconnect power to the appliance before beginning any repair.
• Verify bracket orientation and fastener locations before removal; retain any original screws or clips unless replacements are provided.
• Handle sharp edges carefully and use proper tools; minimal mechanical skill required.
• Inspect and replace those components as needed for a secure repair.

This lamp cover is the replacement light lens that protects and shields the interior lamp while helping distribute light evenly. It restores proper lighting appearance and protects the bulb from spills, debris, and impact. What it does

• Protects the appliance lamp from food, grease, moisture, and accidental contact
• Diffuses and directs light for more even interior illumination
• Restores a cracked, yellowed, or missing lens that can reduce usable light
• Helps prevent direct contact with the lamp and supports safe operation

• One lamp cover/lens as shown

• Disconnect power to the appliance before starting any repair
• Handle the cover carefully to avoid cracking; use gloves if needed
• Align tabs or mounting slots and snap or secure into place; if fasteners are present, use the correct screwdriver
• If the lamp or socket appears damaged, replace both parts.

Fan shroud assembly for refrigerator evaporator compartment. Directs airflow and protects fan components. Replace if cracked, broken, or missing.

A replacement cover motor that powers the refrigerator's dispenser cover, allowing the door to open and close so you can access ice and water. Replaces a worn or failed motor to restore normal dispenser cover operation. What it does:

• Drives the dispenser cover mechanism so the cover opens when dispensing and closes when idle
• Helps keep the dispenser sealed to reduce drafts and prevent pests or debris from entering
• Stops or fails to move when worn, causing a stuck, slow, or noisy dispenser cover
• Works with the dispenser linkage and gears to coordinate cover motion with user controls

What's included:

• One cover motor

Install notes:

• Disconnect power to the appliance before beginning any repair
• Remove dispenser trim and access panel per your model's service instructions to reach the motor
• Handle gears and linkage carefully; ensure proper alignment during reassembly and test cover operation before finishing

Uneven cooling or noisy damper? This damper motor support bracket secures the air control assembly for proper airflow between compartments. DIY fix.

Refrigerator not cooling properly? This damper motor support secures the air damper assembly that controls airflow between compartments. Simple DIY fix.

The Ice Dispenser Door Motor is an OEM part for LG refrigerators. This motor is responsible for the operation of the ice dispenser door, controlling its opening and closing mechanism to allow ice to be dispensed without letting warm air into the freezer. 

Symptoms of a bad Ice Dispenser Door Motor include:

• The dispenser door not opening or closing properly,
• Ice not being dispensed when activated,
• Unusual noises coming from the dispenser mechanism.

Causes of ice dispenser door motor failure can include electrical issues such as shorts or wiring problems, mechanical wear over time, or blockages that strain the motor.

This OEM LG part is also compatible with Sears/Kenmore.

Fix unresponsive controls or features that won't activate with this refrigerator push button switch. Simple replacement restores button functionality.

Supports and stabilizes your refrigerator door for proper alignment. Replace if bracket is cracked, broken, or causing door misalignment issues.

Fix poor cooling or uneven temperatures with this refrigerator fan grill assembly. Restores proper airflow and protects the fan from debris.

Fix frost buildup and uneven cooling in your refrigerator with this evaporator defrost heater. Melts ice from coils during defrost cycles. Moderate repair.

This run capacitor provides the continuous electrical boost needed to keep the refrigerator's compressor motor running efficiently. It stores and releases energy to maintain the proper phase and voltage for the compressor during normal operation. Replace this capacitor if the compressor struggles to start, hums without running, shuts off intermittently, or if the refrigerator stops cooling altogether.

Refrigerator not cooling or making clicking sounds? The compressor run capacitor provides electrical boost to start and run the compressor motor reliably.

This is the condenser fan motor assembly located near the compressor at the back or bottom of the refrigerator. It draws air across the condenser coils to dissipate heat and keep the refrigeration system running efficiently. Replace this motor if the refrigerator is running warm, the compressor is overheating, or you no longer hear the fan running when the compressor is on.

This is a protective case assembly that houses the printed circuit board (PCB) for the refrigerator's ice dispenser or display panel. It encloses and shields the electronic control board from moisture and physical damage. Replace this assembly if the housing is cracked, melted, or damaged, or if you need to access or replace the control board inside.

Replace a faulty main control board if your refrigerator won't cool, ice maker stops working, or display is unresponsive. Moderate DIY repair for most models.

Protective cover assembly that shields the printed circuit board (PCB) in your refrigerator. Replace if cracked, broken, or missing to protect electronics.

Fix dim or exposed interior lighting with a new light lens cover. Protects the bulb from moisture and impact. Easy 5-minute DIY repair with video guide.

Ice maker stopped making ice or won't eject cubes? This ice maker assembly fixes frozen or stuck trays. DIY install in 30-60 minutes with basic tools.

This is the motor that drives the auger inside the ice dispenser chute of a refrigerator. It rotates the auger to push ice from the storage bin through the dispenser opening when the lever or button is activated. Replace this motor if ice is not dispensing, you hear a humming sound but the auger doesn't turn, or the dispenser motor has stopped working entirely.

Stores and supplies water to your refrigerator's dispenser and ice maker. Replace if cracked, leaking, or damaged from mineral buildup or freezing.

Leaking water line connections? This inline tube connector joins two sections of tubing for a secure, leak-resistant seal. Quick 10-minute fix.

Fix water leaks from your refrigerator with this water line tube assembly. Stops leaks caused by brittle or kinked tubing and restores normal flow.

Fix water leaks from your refrigerator with this water line tube assembly. Stops leaks caused by brittle or kinked tubing and restores normal flow.

Located in the left refrigerator door on french door models.

Leaking water from your refrigerator or no water/ice from dispenser? This water inlet valve controls flow to ice maker and dispenser. DIY repair in 30 min.

Plastic cover cap for refrigerators. Snaps onto hinges, handles, or shelving brackets to conceal mounting hardware. Replace when cracked or missing.

Fix loud jackhammer sounds or weak water flow from your refrigerator dispenser. This filter head assembly houses the water filter inside the fridge.

Allows water to flow directly to your dispenser and ice maker without filtration. Install when choosing not to use a water filter. Confirm fit by model.

Covers and protects refrigerator tubing inside the cabinet. Replace this tube cover if the original is cracked, broken, or missing to restore proper appearance.

Refrigerator pipe holder bracket secures water lines and tubing in place. Replace if cracked, broken, or missing to properly support pipes inside your fridge.

This replacement pipe holder secures a small appliance pipe or tube in place, reducing movement and vibration to help prevent noise, wear, or accidental disconnection. It restores proper routing and support for the pipe. What it does:

• Secures a pipe or tubing to the appliance frame or chassis to keep it from shifting
• Reduces rattling or vibration caused by loose plumbing or tubing
• Helps maintain proper alignment to avoid chafing or contact with other components
• Useful when a cracked, broken, or missing clip allows pipe movement

• Turn off and unplug the appliance before accessing internal components
• Remove any panels or covers to reach the pipe clip location
• Snap the clip over the pipe into the existing mounting tab; replace any damaged mounting hardware

Home bar cover panel for bottom-mount refrigerators. Replaces cracked, broken, or missing exterior home bar covers. Restores appearance and finish.

Secures and pivots the ice bank door for smooth opening and proper sealing. Replace if door sags, won't close, or ice dispenser misaligns. Confirm fit.

Seals your refrigerator door to keep cold air in and warm air out. Replace if torn, cracked, or not sealing properly. Confirm fit with your model number.

Replacement lever cover for refrigerators. Protects the lever mechanism and restores secure operation. Replace if cracked, broken, or missing.

Seals the ice bin compartment to prevent warm air and moisture intrusion. Replace when worn or torn to reduce frost buildup and ice clumping.