Parts for Kenmore Elite 79571079014: Dispenser Parts

Replacement mounting screw for refrigerator assembly. Secures components and panels inside your fridge. Order a new screw if yours is stripped or missing.

Replacement mounting screw for refrigerator panels, brackets, and internal assemblies. Restores secure fastening when original screw is missing, stripped, or damaged.

This mounting screw secures panels and small components on compatible LG appliances, restoring fit and stability for loose or rattling parts. A simple replacement that helps prevent further wear and noise from unsecured pieces. What it does

• Fastens trim, panels, brackets or small assemblies to the appliance chassis
• Restores secure fit when original screws are missing, stripped or damaged
• Helps eliminate rattling, vibration noise and misaligned panels
• Works where the original factory screw has corroded or worn

• One mounting screw

• Turn power off and disconnect the appliance before beginning any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug; avoid over-torquing which can strip threads or crack plastic
• Replace with the correct OEM screw rather than forcing

A general-purpose replacement bolt used to secure appliance components and fasten panels. Restores proper fit and helps eliminate movement caused by loose or missing hardware for safer, quieter operation. What it does:

• Fastens panels, brackets, and assemblies to keep parts aligned and secure
• Stops rattling, vibration noise, and loose or shifting components
• Replaces corroded, stripped, or missing bolts that can cause misalignment
• Works where the OEM lists a generic "bolt" or common fastener

• Disconnect power and unplug the appliance before starting any repair
• Use the correct driver or socket to avoid stripping the head
• Replace any associated washers or nuts if damaged; secure to proper tightness without over-torquing
• If threads are damaged, repair or replace the mating hardware to ensure a safe fit

Replacement mounting stud for refrigerator door handles. Installs inside the door to secure handle assembly. Needed when stud is damaged or missing.

Replacement mounting screw for refrigerator panels, brackets, and assemblies. Needed when original fastener is stripped, worn, or missing.

Taptite screw for securing components inside your refrigerator. Replaces lost, stripped, or corroded fasteners during repairs or reassembly.

Lower cover assembly for bottom-mount refrigerators. Replaces cracked, broken, or missing lower covers. Installs at the base of the refrigerator.

Replacement freezer door handle for bottom-mount refrigerators. Installs on the freezer compartment door. Order if your handle is cracked or broken.

This rear door handle replaces a worn or damaged handle on compatible LG appliances, restoring a secure grip and smooth opening. It's a direct-fit exterior handle that keeps the appliance door operating and looking right. What it does

• Provides a secure gripping point to open and close the appliance door
• Replaces cracked, loose, or broken rear handle hardware
• Restores correct alignment and feel when the door is operated
• Helps prevent further damage to the door edge from makeshift handles

• Power off and unplug the appliance before starting work; remove food or shelves as needed for access
• Keep fasteners and mounting clips; transfer original hardware unless new hardware is explicitly included
• Test door operation and alignment after installation; tighten fasteners evenly to avoid stress

Fix water pooling under your refrigerator with this drain tube assembly. Replaces cracked or clogged tubes to restore proper drainage. Straightforward repair.

Adjustable leveling leg that threads into the refrigerator base frame to support and stabilize the unit. Replace worn, broken, or missing legs.

Multi-duct assembly for refrigerators. Replaces cracked, broken, or missing duct housing that directs airflow between compartments. Direct fit part.

Multi-flow air duct assembly for bottom-mount refrigerators. Replaces cracked, broken, or damaged ducts that direct airflow between compartments.

Replacement ice cube tray for your refrigerator freezer. Holds water in molded cavities to form ice cubes. Replace if cracked, broken, or missing.

Replacement drawer tray assembly for your refrigerator. Installs in the fresh food or freezer compartment. Needed when original is cracked or broken.

Replacement glass shelf assembly for refrigerators. Installs inside the fresh food compartment. Needed when original shelf is cracked, broken, or worn.

Replace your broken or cracked refrigerator glass shelf. This tempered glass shelf installs in the fresh food compartment to organize food items.

Air duct connector for refrigerators. Channels airflow between compartments. Replace if cracked, broken, or missing to restore proper air circulation.

Secures and supports shelves inside your refrigerator. Replace if cracked, broken, or missing to properly hold shelves in place and restore stability.

Multi duct assembly for refrigerators. Directs airflow between compartments. Replace if cracked, broken, or missing to restore proper air distribution.

Replacement crisper drawer cover for your refrigerator. Installs over the vegetable tray. Order a new one if your original is cracked or broken.

Chassis support piece that aligns and secures internal TV components. Replace if cracked, broken, or missing to restore secure mounting and reduce movement.

Replaces worn or broken slide rail that supports refrigerator drawer movement. Restores proper alignment for smooth, quiet gliding along the track.

Guide assembly mounts and aligns internal refrigerator components. Replace if cracked, broken, or missing to restore proper positioning and support.

Rail guide assembly for refrigerator or freezer drawers. Guides and supports the slide rail for smooth drawer movement. Replace if worn, cracked, or broken.

Replace your oven door gasket to restore a heat-tight seal, maintain even cooking temperatures, and prevent heat loss. Verify fit with your model number.

A replacement hinge cover that hides and protects the door hinge hardware for a clean look and safer operation. Restores a finished appearance and keeps fingers or clothing from catching on exposed hinge parts. What it does:

• Covers and protects exposed hinge components from dirt and damage
• Keeps hinge hardware out of sight for improved appearance
• Reduces the chance of clothing or fingers catching on the hinge
• Helps maintain smooth door movement by protecting hinge area from debris

• Disconnect power to the appliance before attempting any repair; also shut off water supply if working on a unit with water connections.
• Remove any trim or screws securing the old cover; this part typically snaps or screws into place — keep hardware if reusing.
• Wear gloves to protect hands from sharp edges and to avoid cosmetic damage to the cover.

Covers and conceals the door hinge on your bottom-mount refrigerator. Replace if cracked, broken, or missing to restore a clean, finished look.

Restores tight door seal to prevent leaks and maintain consistent temperatures. Replace when seal is cracked, torn, or no longer sealing properly.

Restores a tight seal around your refrigerator door to keep cold air in and warm air out. Replace when worn, torn, or cracked to maintain efficiency.

Mullion plate assembly installs between French doors on bottom-mount refrigerators. Replace if cracked, broken, or spring attachment points are damaged.

Replacement drawer guide for bottom-mount refrigerators. Restores smooth tracking and alignment when original is cracked, broken, or worn. Installs inside drawer cavity.

Replace your cracked, broken, or missing refrigerator door basket. Restores secure storage for bottles, jars, and condiments on the inner door.

Door basket assembly mounts to refrigerator door for secure storage of bottles, jars, and condiments. Replace cracked, loose, or missing bins.

Door basket assembly mounts to refrigerator door for secure storage of bottles, jars, and condiments. Replace cracked, loose, or missing bins.

Door basket assembly mounts to refrigerator door for secure storage of bottles, jars, and condiments. Replace cracked, loose, or missing bins.

Door stopper assembly for bottom-mount refrigerators. Installs on door to limit opening angle and prevent damage. Replace if cracked, broken, or missing.

Door stopper assembly cushions and limits refrigerator door travel. Replaces cracked, broken, or worn stoppers causing misalignment or door slamming.

Hinge assembly for refrigerator doors. Installs at door pivot point to support door weight and enable smooth opening/closing. Replace if cracked or worn.

Replaces worn or broken lower door hinge that no longer provides proper tension. Installs at the bottom center of French door refrigerators to pivot and support the door. Essential for smooth door operation and proper seal.

Connector assembly for refrigerators. Installs to join electrical components. Replace if cracked, broken, or connection points are worn or damaged.

Connector assembly for refrigerators. Installs to join electrical components. Replace if cracked, broken, or connection points are worn or damaged.

Shelf rail holder that secures and supports refrigerator shelves. Replace if cracked, broken, or missing to restore proper shelf alignment and stability.

Shelf rail holder for bottom-mount refrigerators. Secures sliding shelves in place. Replace if cracked, broken, or missing to restore proper shelf support.

Replace a worn or broken freezer drawer bar connector assembly to restore smooth gliding and proper alignment. Confirm fit with your model number.

Replacement door hinge for bottom-mount refrigerators. Installs on the cabinet to support and pivot the door. Needed when hinge is cracked or broken.

Specialized spanner tool for turning slotted nuts and collars on refrigerator components. Replace if lost, worn, or damaged to safely adjust fittings.

Replacement ring for your refrigerator. Installs on internal components to secure or seal parts. Order a new ring if yours is cracked or missing.

Refrigerator mullion door won't close or seal properly? This spring operates the center divider flapper door. DIY-friendly installation in 5 minutes.

Upper door hinge assembly for bottom-mount refrigerators. Mounts at the top of the cabinet to support the door. Replace if cracked, broken, or lost.

Upper door hinge for refrigerators. Mounts on the right side to secure the door. Replace if cracked, broken, or missing to restore proper door support.

Ice dispenser not working or leaking cold air? This ice chute door guides ice from bin to dispenser and maintains proper insulation seals.

Microwave door won't latch or release properly? This lever holder bracket secures the door lever assembly to restore smooth door operation. Easy DIY fix.

Ice chute door not opening fully? This dispenser door link connects the actuator to the door for smooth operation. Simple DIY fix for binding doors.

This holder bracket secures internal refrigerator components in place. Replace if your original bracket is cracked, broken, or missing to restore stability.

Spring for the ice door lever mechanism in your refrigerator's dispenser. Replace if the spring is stretched, broken, or missing and the ice door won't stay closed.

Ice chute door frame for bottom-mount refrigerators. Mounts around the dispenser opening. Replace if cracked, broken, or missing to restore appearance.

Fixes unresponsive control panel, blank display, or non-working touchpad on your refrigerator. This display power control board restores interface functionality.

Replacement water dispenser paddle lever for your refrigerator. This actuator installs on the dispenser front panel. Order a new one if broken, cracked, or worn.

Drip pan drain trough for bottom-mount refrigerators. Replaces cracked, broken, or missing drain pans that collect condensation below the unit.

Refrigerator not cooling or freezer warm? The compressor assembly circulates refrigerant to maintain temperature. Professional installation recommended.

Fix a refrigerator that won't cool or start with this compressor start device. Works with the PTC thermistor to help your compressor run properly.

Refrigerator stopped cooling after power outage? The compressor overload protector prevents overheating damage. Easy DIY fix when compressor won't run.

Protective cover for the PTC start relay on your refrigerator compressor. Replace if cracked, broken, or missing to shield relay components from damage.

Fix a refrigerator not cooling properly with this compressor sealing pipe. Essential sealed system component for restoring proper refrigeration.

Front cover panel for your refrigerator door. Snaps into place to restore appearance and protect controls. Replace if cracked, broken, or missing clips.

Replaces broken or missing refrigerator door stop. Limits door travel to prevent over-extension and maintain proper alignment and smooth operation.

Support roller that mounts to the refrigerator base, allowing the unit to roll for cleaning or service. Replace if worn, broken, or causing uneven positioning.

Fix refrigerator not cooling properly or running constantly with a new drier assembly. Removes moisture from refrigerant. Requires EPA-certified technician.

Refrigerator drip tray that collects water and condensation beneath the appliance. Replace if your drip tray is cracked, warped, or missing.

If your refrigerator isn't cooling properly, a faulty condenser assembly may be the cause. This part restores electrical connections and airflow for reliable cooling performance.

Fix loud grinding noise or warm freezer with this evaporator fan assembly. Circulates cold air between compartments. 15-minute repair for most DIYers.

Fix poor cooling or uneven temperatures with this refrigerator fan grill assembly. Restores proper airflow and protects the fan from debris.

Fix error code ER DH or ice buildup in your freezer with a new defrost control assembly. Regulates defrost cycles to prevent frost. Moderate DIY repair.

If your refrigerator light stays on when the door closes, the door switch likely failed. This easy 5-minute DIY fix restores light control.

Fix a stuck or non-working ice/water dispenser with this micro switch. Common cause of dispensers running continuously or not activating. Easy DIY repair.

Refrigerator not cooling evenly or making noise? This DC fan motor restores proper airflow when your circulation fan fails or runs intermittently.

Refrigerator not cooling evenly or freezer too warm? A failed DC motor stops air circulation. This motor ensures proper airflow for consistent temps.

This motor bracket secures and aligns the appliance motor, providing stable mounting and helping reduce vibration for reliable operation. It's a direct-fit replacement when the existing motor mount is cracked, bent, or loose. What it does:

• Provides a fixed mounting point to keep the motor properly aligned with the drive system
• Dampens movement to reduce vibration and noise during operation
• Prevents motor shift that can cause belt misalignment or rubbing
• Restores secure fastener locations for reliable motor performance

• One motor bracket

• Disconnect power (and water, if applicable) before beginning any repairs
• Use the original fasteners or OEM-equivalent hardware to secure the bracket
• After installation, verify motor alignment and run a test cycle to ensure quiet, vibration-free operation

This motor bracket secures the appliance motor to the cabinet, keeping the motor aligned and stable for reliable operation. It's a direct-fit replacement when the original bracket is cracked, bent, or missing. What it does:

• Provides a secure mounting point to hold the motor in proper position
• Maintains motor alignment to prevent vibration, noise, or premature wear
• Helps ensure attachments (pulleys, fans, or gears) stay correctly engaged
• Commonly replaced when the bracket is damaged, rusted, or deformed

• Disconnect power to the appliance before beginning any repair.
• Verify bracket orientation and fastener locations before removal; retain any original screws or clips unless replacements are provided.
• Handle sharp edges carefully and use proper tools; minimal mechanical skill required.
• Inspect and replace those components as needed for a secure repair.

This lamp cover is the replacement light lens that protects and shields the interior lamp while helping distribute light evenly. It restores proper lighting appearance and protects the bulb from spills, debris, and impact. What it does

• Protects the appliance lamp from food, grease, moisture, and accidental contact
• Diffuses and directs light for more even interior illumination
• Restores a cracked, yellowed, or missing lens that can reduce usable light
• Helps prevent direct contact with the lamp and supports safe operation

• One lamp cover/lens as shown

• Disconnect power to the appliance before starting any repair
• Handle the cover carefully to avoid cracking; use gloves if needed
• Align tabs or mounting slots and snap or secure into place; if fasteners are present, use the correct screwdriver
• If the lamp or socket appears damaged, replace both parts.

Fan shroud assembly for refrigerator evaporator compartment. Directs airflow and protects fan components. Replace if cracked, broken, or missing.

Powers the dispenser cover door mechanism on your refrigerator. Replace if the motor has worn out, failed, or no longer operates the cover smoothly.

Uneven cooling or noisy damper? This damper motor support bracket secures the air control assembly for proper airflow between compartments. DIY fix.

Refrigerator not cooling properly? This damper motor support secures the air damper assembly that controls airflow between compartments. Simple DIY fix.

Controls ice dispenser door opening and closing. Replace if door won't open, stays open, or motor makes no sound when dispensing. Mounts behind dispenser trim.

Fix unresponsive controls or features that won't activate with this refrigerator push button switch. Simple replacement restores button functionality.

Supports and stabilizes your refrigerator door for proper alignment. Replace if bracket is cracked, broken, or causing door misalignment issues.

Fix poor cooling or uneven temperatures with this refrigerator fan grill assembly. Restores proper airflow and protects the fan from debris.

Fix frost buildup and uneven cooling in your refrigerator with this evaporator defrost heater. Melts ice from coils during defrost cycles. Moderate repair.

Compressor humming but not starting? This start capacitor provides stable starting power to your refrigerator compressor. DIY-friendly repair.

Refrigerator not cooling or making clicking sounds? The compressor run capacitor provides electrical boost to start and run the compressor motor reliably.

Refrigerator not cooling evenly or making loud noises? This evaporator fan motor circulates cold air across coils to maintain consistent temperatures.

Case assembly support plate for bottom-mount refrigerators. Replaces cracked, broken, or damaged structural support components inside the cabinet.

Replace a faulty main control board if your refrigerator won't cool, ice maker stops working, or display is unresponsive. Moderate DIY repair for most models.

Protective cover assembly that shields the printed circuit board (PCB) in your refrigerator. Replace if cracked, broken, or missing to protect electronics.

Fix dim or exposed interior lighting with a new light lens cover. Protects the bulb from moisture and impact. Easy 5-minute DIY repair with video guide.

Ice maker stopped making ice or won't eject cubes? This ice maker assembly fixes frozen or stuck trays. DIY install in 30-60 minutes with basic tools.

Refrigerator not cooling properly? A failed evaporator fan motor stops cold air circulation. This motor replacement restores airflow across the coils.

Stores and supplies water to your refrigerator's dispenser and ice maker. Replace if cracked, leaking, or damaged from mineral buildup or freezing.

Leaking water line connections? This inline tube connector joins two sections of tubing for a secure, leak-resistant seal. Quick 10-minute fix.

Fix water leaks from your refrigerator with this water line tube assembly. Stops leaks caused by brittle or kinked tubing and restores normal flow.

Fix water leaks from your refrigerator with this water line tube assembly. Stops leaks caused by brittle or kinked tubing and restores normal flow.

Fix water dispenser not working or leaking inside your refrigerator door with this secondary water valve. Direct replacement part for french door models.

Leaking water from your refrigerator or no water/ice from dispenser? This water inlet valve controls flow to ice maker and dispenser. DIY repair in 30 min.

Plastic cover cap for refrigerators. Snaps onto hinges, handles, or shelving brackets to conceal mounting hardware. Replace when cracked or missing.

Fix loud jackhammer sounds or weak water flow from your refrigerator dispenser. This filter head assembly houses the water filter inside the fridge.

Allows water to flow directly to your dispenser and ice maker without filtration. Install when choosing not to use a water filter. Confirm fit by model.

Covers and protects refrigerator tubing inside the cabinet. Replace this tube cover if the original is cracked, broken, or missing to restore proper appearance.

Refrigerator pipe holder bracket secures water lines and tubing in place. Replace if cracked, broken, or missing to properly support pipes inside your fridge.

This replacement pipe holder secures a small appliance pipe or tube in place, reducing movement and vibration to help prevent noise, wear, or accidental disconnection. It restores proper routing and support for the pipe. What it does:

• Secures a pipe or tubing to the appliance frame or chassis to keep it from shifting
• Reduces rattling or vibration caused by loose plumbing or tubing
• Helps maintain proper alignment to avoid chafing or contact with other components
• Useful when a cracked, broken, or missing clip allows pipe movement

• Turn off and unplug the appliance before accessing internal components
• Remove any panels or covers to reach the pipe clip location
• Snap the clip over the pipe into the existing mounting tab; replace any damaged mounting hardware

Home bar cover panel for bottom-mount refrigerators. Replaces cracked, broken, or missing exterior home bar covers. Restores appearance and finish.

Secures and pivots the ice bank door for smooth opening and proper sealing. Replace if door sags, won't close, or ice dispenser misaligns. Confirm fit.

Seals your refrigerator door to keep cold air in and warm air out. Replace if torn, cracked, or not sealing properly. Confirm fit with your model number.

Replacement lever cover for refrigerators. Protects the lever mechanism and restores secure operation. Replace if cracked, broken, or missing.

Seals the ice bin compartment to prevent warm air and moisture intrusion. Replace when worn or torn to reduce frost buildup and ice clumping.