Impeller & Seal Kit

This impeller kit restores reliable water movement inside the dishwasher pump. A worn or damaged impeller can lead to weak circulation, louder operation, and poor wash results; replacing the kit helps return normal pressure and performance. What it does:

• Drives water flow through the pump during wash cycles
• Helps maintain proper wash pressure for effective cleaning
• Can reduce grinding or rattling noises from the pump area

• Includes 1 impeller kit

• Disconnect power and shut off water before servicing
• Access the pump/sump area and note the orientation of parts during disassembly
• Inspect the pump housing and any seals/O-rings; replace worn components per your model's service information
• After reassembly, run a short cycle to check for leaks and strong water movement

This lower impeller directs wash water from the dishwasher's lower pump to the spray arms, helping restore proper water flow for better cleaning performance. Designed as a direct replacement for the lower wash impeller. What it does:

• Channels water from the lower pump to the spray system to maintain cleaning coverage.
• Worn, cracked, or clogged impellers can cause weak spray, poor cleaning, or unbalanced wash cycles.
• Replacing a damaged impeller can reduce unusual pump noise and help restore normal pump operation.
• Works with the lower pump assembly to maintain correct water circulation during the wash cycle.

• Disconnect power and water supply before servicing the dishwasher.
• Access the lower pump area by removing the dishwasher tub access or lower base as required by your model.
• Inspect the pump housing and seals for damage and replace any worn components to prevent leaks.

This chopper assembly replaces the food-chopping component in compatible countertop food processors, restoring even chopping and diced results. It helps get blades turning and keeps food processing performing as intended. What it does:

• Spins and chops food inside the processor bowl for consistent results
• Restores proper cutting when chopping is uneven or not happening
• Helps eliminate food buildup that causes noisy or inefficient operation
• Works with the existing drive coupling to transfer motor power to the blades

• Disconnect power and remove the processor bowl and lid before servicing
• Handle blades carefully — they are sharp; wear cut-resistant gloves
• Ensure the part seats fully on the drive coupling and locks into place before use
• Test operation with small amounts of food after reassembly; stop immediately if unusual noise or resistance occurs

This upper impeller directs water flow inside the pump housing to restore proper circulation and help your appliance clean and drain effectively. It's a direct-fit replacement designed to match the OEM shape and flow path. What it does:

• Moves water through the pump to support normal wash and drain cycles
• Helps maintain proper spray pressure and cleaning performance
• Can reduce noisy or irregular pump operation when damaged
• Commonly replaced when cracked, chipped, or worn

• Disconnect power (and water if applicable) before starting any repair.
• Remove the pump housing carefully to access the impeller; keep track of fasteners and seals.
• Inspect the pump housing, shaft, and seals for wear; replace damaged seals or gaskets.
• Reassemble securely and test the appliance through a short cycle to ensure proper flow and no leaks.

This wash impeller is the pump rotor that moves dishwasher wash water through the circulation system to help clean dishes. Replacing a worn impeller restores proper water flow and improves cleaning performance. What it does:

• Spins on the wash pump shaft to push water through spray arms for effective cleaning
• Helps maintain proper spray pressure during the wash cycle
• Worn or damaged impeller can cause weak spray, poor cleaning, or unusual pump noise
• Works with the pump housing and seals to keep water circulating where it belongs

• One wash impeller

• Disconnect power and water supply before beginning any repairs
• Access the lower pump assembly by removing the lower access panel and spray arm(s)
• Inspect pump housing and seals; replace any damaged gaskets to prevent leaks
• Reassemble carefully and run a test cycle to check for proper operation and leaks

This wash impeller spins in the washer's circulation pump to move and spray wash water for effective cleaning. Replacing a worn or broken impeller restores proper water flow and helps your machine agitate and rinse clothes as designed. What it does:

• Replaces the rotating impeller that drives water circulation in the wash pump
• Restores spray and flow for normal wash and rinse performance
• Can stop or reduce noisy operation caused by cracked or missing blades
• Helps prevent poor cleaning results linked to reduced water movement

• One wash impeller

• Disconnect power and water supply before starting any repair
• Access typically requires removing the washer cabinet or pump housing; follow the OEM repair manual
• Inspect the pump housing and seals for wear; replace any damaged components
• Tighten and seat the impeller per OEM guidance; do not force or overtighten

This drain impeller assembly circulates and ejects wash water through the washer's drain pump, restoring proper drainage and helping prevent standing water after a cycle. Durable design fits into the pump housing for reliable performance. What it does:

• Presses water through the pump housing to enable normal draining during drain/spin cycles
• Replaces worn or damaged impeller vanes that can cause slow or no draining
• Helps reduce noise and vibration from an imbalanced or broken impeller
• Restores proper water flow when the pump motor runs but little or no water is expelled

• Disconnect power and water supply before starting any repair
• Access requires removing the washer cabinet or pump housing depending on model
• Inspect pump housing and sealing surfaces for damage or debris before installing the new impeller
• Use common hand tools; tighten fasteners to OEM torque specs where provided

This straightening vane guides and stabilizes spray flow inside the dishwasher to help improve water distribution and cleaning coverage. It replaces a cracked or missing vane to restore proper spray-arm performance. What it does

• Guides spray-arm water flow so spray reaches dishes more evenly
• Helps stabilize or align the spray arm during operation
• Can prevent spray arm wobble or erratic spinning if the vane is broken
• Common symptom: poor cleaning or uneven coverage in one area of the rack

• Disconnect power and water supply before starting any repair
• Removal of the lower spray arm or access panel may be required; keep small parts and fasteners organized
• Install by aligning the vane to the spray-arm/body and snapping or fastening per OEM orientation; avoid forcing parts

This replacement impeller fits inside the pump to move water through the appliance's system. A worn or broken impeller can lead to weak circulation, poor cleaning results, or a motor that hums without moving water. What it does:

• Mounts on the pump shaft to push water and create flow/pressure
• Helps deliver spray action and/or discharge flow for proper cycle operation
• Typical symptoms include poor wash performance, little/no water movement, or unusual grinding/rattling from the pump area

• 1 impeller

• Disconnect power and shut off water before servicing
• Access the pump assembly; remove lower panels or the sump as needed
• Clear debris, then install the impeller in the correct orientation, keeping any spacers in order
• Reassemble, restore power/water, and check for leaks and proper operation

This replacement rack wheel restores smooth rolling for a dishwasher rack so dishes slide in and out reliably. It prevents catching, sticking, and uneven rack movement to keep loading and unloading simple. What it does:

• Replaces a worn or broken rack wheel so the rack rolls smoothly along its track
• Reduces scraping, jamming, and noisy operation when moving the rack
• Helps keep racks properly aligned to prevent dishes from tipping or colliding
• Fits upper or lower rack assemblies where this style of wheel is used

• One replacement dishwasher rack wheel

• Designed for a simple snap-on or axle installation; your model's parts diagram for exact placement
• Inspect the rack axle and track for damage and clean debris before installing
• Wear gloves to avoid pinching fingers when removing/installing the rack
• If the wheel does not seat properly, stop and verify you have the matching wheel for your rack before forcing it