Genuine Kenmore / Sears Dryer Parts page 32

Genuine Whirlpool part

Kenmore Light Socket (Straight)

By: Whirlpool

Part Number: WPW10119935

This light socket replaces a worn or heat-damaged lamp holder so your appliance light works reliably again. Its straight-connector design fits applications with in-line wiring, ensuring a secure electrical connection to the interior light bulb.

Holds the light bulb and supplies power to it
Restores interior illumination for better visibility
Straight terminal orientation for housings requiring inline wiring clearance
Typical signs of failure: light stays off with a good bulb, flickers, or shows heat damage at the socket

What's included: 1 light socket Install notes:

Disconnect power at the breaker or unplug before servicing; allow the area to cool completely
Remove any lens/cover; transfer wires one at a time to maintain correct connections
Secure the socket with existing bracket/fasteners; do not overtighten
Test light operation before reassembly and confirm the door switch activates the light

This part fixes the following symptoms

Light not working

Do-It-Yourself Stories from Customers like You The bulb was not working Camille M. • Kew Gardens , NY • May 06, 2015

I bought a new bulb but it did not work. Then the super looked at it and realized the socket was not good. Read more

More

$52.95

Compare At:: $63.01
You Save:: $10.06

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Frigidaire part

Kenmore Access Panel (Service Cover)

4.9 (13)

By: Frigidaire

Part Number: 134321702

This access panel service cover replaces a damaged or missing cover to protect internal components and give technicians safe access for diagnostics and repairs. It restores a finished appearance while preventing dust and debris from entering service areas. What it does:

Covers and protects internal components, wiring and controls from dust and damage.
Provides a removable service access point for diagnostics and repairs.
Common symptoms: cracked, bent, loose or missing panel; exposed components; rattling or drafts near the service area.
Replacement helps restore safety, reduce drafts and eliminate noise caused by a loose or damaged panel.

What's included: Includes one access panel. Install notes:

Disconnect power (and water if applicable) before removing or installing the panel.
Wear gloves to protect hands from sharp sheet-metal edges.
Reuse existing screws or mounting clips when possible; basic hand tools typically required.

Do-It-Yourself Stories from Customers like You The front panel was broke due to pulling on it and not sliding the handle the front clamp rusted in two the bottom panel was rusted and the door boot seal looked terrible Daren R. • Garden City , GA • January 19, 2015

Watched the video a few times for door boot seal replacement. It was a lot of help! The spring is the hardest to replace and I did enlist the help of my wife. Everything went back on great. If you have to replace the front panel (with the buttons) be mindful that the buttons are spring loaded and will come out. I did not lose any and it went back together just fine. A little touch up paint on the washer and it all looks brand new and works great. And the parts came in quicker than... Read more

More

$97.95

Compare At:: $116.56
You Save:: $18.61

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Kenmore Touch Up Paint

4.8 (17)

By: Whirlpool

Part Number: 4392899

Bottle with brush. Color: Biscuit paint. It's point-six fluid ounces.

Do-It-Yourself Stories from Customers like You Lack of accurate control on 2 electric range burners Jeff D. • Neenah , WI • April 09, 2016

Ordered 2 infinite burner controls from Appliance Parts Pros and watched the online video on the replacement of them at the same time. When they arrived promptly, I was ready to take on the job. The fix only took about 15 minutes because I was prepared after watching the video. Read more

More

$17.76

Compare At:: $21.31
You Save:: $3.55

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Kenmore Venting Kit

4.5 (4)

By: Whirlpool

Part Number: W10323246

WPL VENT KIT, 4-WAY ULT

Do-It-Yourself Stories from Customers like You Changed the dryer vent location from the rear to the right side Andrew K. • Santa Clara , CA • April 16, 2014

Used the Wpl. Vent Kit, 4-way. This is not a quick, easy job. You have to disassemble the dryer, removing the entire front, door, drum, and control panel. Take your time and take pictures as you go so you can get it all back together again after installing the conversion kit. It will take you at least an hour, and you need room to work. Also, remember that after converting the dryer over to left or right vent, you now have a wider dryer with the ducting sticking out the side. (4") Make sure it... Read more

More

$66.67

Compare At:: $80.00
You Save:: $13.33

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Kenmore / Sears Dryer Parts

Kenmore Light Socket (Straight)

Kenmore Access Panel (Service Cover)

Kenmore Touch Up Paint

Kenmore Venting Kit

Related Parts

Common Problems

Popular Kenmore Dryer Models