Need Help?
Call
Indicator light signals power and active burners on your cooktop control panel. Replace when dim, cracked, or failed. Verify fit with your model number.
Replaced light. Read more
This small indicator light mounts on the range's control panel or front fascia and illuminates to signal when a burner or oven element is active or the oven has reached the set temperature. It typically consists of a lens, socket, and bulb in a compact assembly. Replace this indicator light if it no longer illuminates even after changing the bulb, or if the lens is cracked or discolored.
Used a multi-meter to diagnose the problem. Ruled out the incoming power source and the control switch. Determined it was a failed heating element. Watched videos showing how to remove the glass top from my slide in range. Removed the top and replaced the heating element. Put it all back together, plugged it in and the heating element works again. Read more
Range indicator light lens kit with red and clear lenses. Replace when cracked, discolored, or missing. Fits control panel burner indicators. Verify fit.
Unplugged old control panel and plugged in replacement. 5 different colored wires slid easily onto metal prongs. Long plastic piece with thin prongs had to be pried up with screwdriver. You will also need plastic face plate. I was able to peel old one and reuse it. Used razor blade to cut adhesive. Oven clicked back on as soon as it was plugged back in. Set clock time and oven was operational again. Part a bit pricey but $200 fix for 13 year old stove better than cost of replacement. Plus I... Read more
Protects the bulb from moisture and contact while diffusing light. Replace when cracked or missing to restore safe, even oven lighting. Confirm fit.
Went to google and found "Appliance Pros" Information. Pulled up a complete diagram of the cook top. Called and ordered the Switch Kit by describing it from the diagram this was April 1, 2015. I had been told by TWO parts house that the Indicator Light part had been discounted, but you could still get the Lens. On the morning of April 2, 2015 I again called "Appliance Pros" and to my surprise they were able to furnish both of these parts. Since they were in the packing stage on the Switch they... Read more
Indicator light bulb illuminates control panel displays on your range. Replace when light dims or burns out to restore visibility. Verify fit with model number.
Protects and diffuses refrigerator interior light. Replace if warped, melted, or cracked to restore proper lighting. Snaps into place easily.
Replaced light assy , plastic lens, cover along with PCB (control board.) Read more
Usually ships within 4 - 14 days
Light housing mounts and protects bulb wiring in your range hood. Replace when corroded or damaged to restore secure bulb connections and reliable lighting. Confirm fit by model.
Replaced corroded light housings, where bulb connections to housing felt "scratchy" when plugging in--suspect corrosion. I was hoping that the new housings would simply plug in (wired connections would disconnect easily). However, I found that the originals were soldered and heat-shrunk in. I had to trace and cut the original connection, butt-connect in (can't solder in the air, above my head...), heat-shrink and then tape my connections. However, the lights are working much better... Read more
Restores interior drum lighting for better visibility when loading and unloading laundry. Replace when light fails or dims to clearly see items in tub.
Heat-resistant socket that secures and powers your oven's interior light bulb. Replace if light fails or socket shows burn marks or bare wires. Verify fit.
Oven lamp holder shorted out due to bare wire. Turn off power and switched it out now works Read more
Dryer drum light not working or bulb melted in socket? This interior light socket assembly restores illumination. Simple push-in installation.
Thanks to these parts I ordered my dryer is up and running like new again. So happy with my purchase. Read more
Replace your oven light bulb socket to restore interior lighting. Fixes flickering or non-working oven lights. Confirm fit with your model number.
Replace your cracked or cloudy dispenser light lens to restore clear illumination. Protects the bulb and improves visibility. Verify fit with your model.
This is a replacement light bulb for the interior cavity of a microwave oven. It illuminates the cooking area so you can monitor food while it heats. Replace this bulb if the interior light no longer turns on when the door is opened or during operation, and you have confirmed the bulb socket and wiring are functioning properly.
Change bulb. I had to move the microwave from the wall disassemble the unit and remove some internal parts to access and change the bulb. Read more
Indicator light lens for cooktops and ranges. Replace if cracked, discolored, or missing to restore burner visibility. Verify fit with your model number.
Replace your refrigerator's LED light assembly when interior lighting dims or fails. Restores bright, energy-efficient illumination. Verify fit with model number.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.