Kenmore / Sears Refrigerator Gasket & Seal

Replaced it. Read more

Ordered the part via the model number. Removed the old gasket (just pulls out of the indentations and cleaned the channel for the gasket. Pushed into the channel and no more frost forming in the freezer. Read more

Replaced both the door gasket * defrost timer and everything works great. Read more

I searched online for replacement parts and Appliance Parts Pros had the part in stock. Before I ordered the part, I watched the video to see if I could handle the repair. I ordered the part and soaked the gaskets with warm water in the tub. The old gaskets had a much simpler setup, so no cutting was involved. I simply pulled the old gasket out of the track without issues, and installed the new one with finger pressure. Per the video, I took both doors off. However, due to the design, I could... Read more

Left new gasket on the table overnight so it could stretch out. Removed the door. Temporarily replaced it with plastic and tape. Pulled off old gasket. Cleaned surfaces with decreaser and wiped dry with paper towels and alcohol. Inserted new gasket. Replaced door. Read more

Removed and replaced the gasket. Read more

• Door won't open or close
• Door sweating
• Frost buildup
• Leaking

I followed a video to remove the inside door panel and gasket. Putting the new gasket was as easy as the video said. The only problem was ice had built up on the inside of the door panel that needed to be defrosted. Read more

I watched the video on this website and did the repair Read more

Removed old rubber door gasket, replaced with new gasket. No tools needed. Read more

By replacing it Read more

Purchase a new one and installed per your video on Youtube. Great and easy. Read more

Replaced freezer door gasket. Door gaskets needed replacement did those as well Read more

It was an easy fix the instructions where very helpful, thank you very much Read more

1. Ordered new gasket. 2. Heated with blow dryer gasket until it resumed its normal shape. 3. Turned off refrig. 4. Cleaned freezer compartment. 5. Removed old gasket. 6. Installed new gasket. 7. Turned on refrig. 8, Operation back to normal in about 6 hours. Read more

The right door seal and the freezer door seal are easily removed and replaced. They just pull out of the slot. These 2 new gaskets push in easily. The left door has the French Door Mullion, that blocks the removal of the door gasket. There are two screws in the middle that holds it on, and there is a spring at the bottom of the mullion that keeps the mullion in place. The spring can easily be removed, or left in place. There is an electrical connector in the middle of the mullion. As suggested... Read more

Replaced the gasket. Five minute repair after door removal. Working great now. Read more