Need Help?
Call
Holds utensils and cutlery in the lower rack during wash cycles. Replace if bottom is cracked, broken, has holes, or compartments are damaged or missing.
Bought a new baskit Read more
Replace your cracked, rusted, or broken dishwasher tine row. This adjustable row installs in the upper or lower rack for flexible dish loading.
Order parts and replace. When removing attachments, do them one at a time and install them on new rack as you go. Watch for the small release tabs on the attachments (baskets, rollers and tine holders), "gently" put pressure to release; remember these units have been in hot water and they are brittle. Read more
Replacement right adjuster housing for dishwasher upper rack. Holds and supports the right side height adjustment mechanism. Replace if cracked or worn.
I bumped into my KitchenAid dishwasher and the upper rack adjuster cracked. There was already a crack on the notch of the housing where the handle (lever) sits. In addition, the positioner popped out and I couldn't find it. So, I bought the three parts from AppliancePartsPros online. It arrived in about a week. The repair was fairly simple, but it still took about 45 minutes because I didn't want to crack the assemblies. For the housing, use a small slotted screwdriver to carefully... Read more
Secures the dishwasher upper rack to the slide rail and allows height adjustment. Replace if the clip is cracked, broken, or won't snap onto the positioner.
Ordered numerous replacement parts. Started with the tracks which required pulling the washer out of the cabinet to reach the screws. Pushed it back in and re-secured. Then stared on the rack and replaced the rack adjusters and various clips. Everything is straight forward and easy to replace. I originally called a local repair place to have them repair it. They came out and said they needed to order parts and they would call back. A week went by and I followed up with them. Had to leave... Read more
The Upper Dishrack Rail is an OEM replacement part for Whirlpool dishwashers. It guides upper racks in and out for easy access to dishes.
Causes of faulty rails can include worn rollers, broken clips, or stress cracks in modules after repeated cycles.
Symptoms of a bad upper dishrack rail include:
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Ordered the parts and followed the instruction videos that Sears provide, Initially tried to order parts from Sears directly but the web-page kept complaining about my shipping address. Their loss- no wonder they're going out of business. Also, should note that the original assembly was plastic but the replacement was metal. Sure sign of a crappy cost-cutting decision. Overall, very happy with Appliance Parts Pros! Read more
Replacement silverware basket for dishwashers. Organizes utensils during wash cycles. Replace if cracked, broken, or holes have developed in the bottom.
I finally bit the bullet to order a new silverware basket as the bottom plastic was broken and forks and knives would slide through. Appliance parts pros had the very best price anywhere and the basket came in speedy record time! Read more
The Dishrack Stop Clip is an OEM component specifically designed for Whirlpool brand dishwashers. This clip functions to hold the upper dish rack in place during washing cycles.
Symptoms of a bad dishrack stop clip can include:
Causes of a bad dishrack stop clip usually stem from normal wear and tear over extended use. Overtight loading of dishes could also put excessive stress on the clip.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.
Ordered exact part & installed Read more
The Track Assembly is an OEM replacement part for Whirlpool dishwashers. As the guide rail that the lower rack rolls along, this track plays an essential role in properly positioning dishes within the unit. Causes of a faulty track can include normal wear from extended use, damage from heavy loads or impacts, or failures of the mounting brackets. Symptoms of a bad track include:
This Whirlpool OEM part is compatible with additional appliance brands including Maytag, KitchenAid, and Jenn-Air.
Replaced the tracks. You need to pull the dishwasher out for this since the screws holding them are on the outside. Not super complicated in my case since my dishwasher didn't require disconnecting water hose or power wires to pull out (there was enough slack behind). Read more
Left-hand track assembly for dishwasher lower rack. Guides rack smoothly in and out. Replace if broken, cracked, or worn plastic race causes instability.
The lower basket L& R track bearing brackets on my KitchenAid dishwasher (KDTE704DSSO) finally gave out (ball bearings everywhere) after (6) years of daily, family use. The service techs provided me with all the information I needed to successfully and quickly complete my project. My parts were mailed to me very quickly and my dishwasher was up and running in short order. The parts were clean and in perfect working condition. (After pulling your dishwasher out, there are two sets of screws on... Read more
Replacement silverware basket for dishwasher lower rack. Holds utensils upright during wash cycles. Replaces cracked, broken, or worn baskets.
Looked at Dishwasher. Scratched head and armpit. Told wife I would fix, not repariman. Wife skeptical - shook head. Found schematic on web. Found YouTube video of guy repairing same DW model. Disassembled. Diagnosed problem. Chopper assembly welded in place by water scale -broke removing. Potty mouth. Ordered parts. Waited for parts. Washed dishes by hand. Wife doing ok. Parts arrived (in only a day or two!!! Fed Ex for 7 bucks!! Great deal). Put on nasty t-shirt, baggy shorts. ... Read more
Right-hand dishrack support bracket mounts to the interior side wall of your dishwasher tub to stabilize the upper rack. Replace if cracked or broken.
Removed the bottom rack from the dishwasher. Removed the 2 front plates at bottom of the dishwasher. Removed the two screws from the top of the dishwasher holding the dishwasher to the counter-top. Pulled the dishwasher out. Removed the 8 mm screws from the outside of the dishwasher-- 4 per side (Underneath the sound proofing). Pulled the old tracks and placed the new tracks into place and tightened the screws back up. Pushed the dishwasher back into place. Reinstalled the screws securing... Read more
Left-hand dishrack support mounts to the rack assembly to hold it level and guide smooth travel. Replace if cracked, broken, or worn to restore alignment.
Secures tine rows in upper or lower dishwasher rack. Replace if cracked, broken, or missing. Clips into place in seconds—no tools required.
Purchased the items and installed in less that a minute. Read more
Gray plastic retainer clip that secures tine rows to the dishwasher rack. Replace if broken, cracked, or missing to keep tine rows properly attached.
Replacement part, new and improved, WHIRLPOOL Adjuster Kit, Part #: AP5956100 (W10712394). Was easy to install. We even found a Youtube video which was a huge help! (We replaced both sides.) https://www.youtube.com/watch?v=CIMg0gEfeCA Read more
Secures tine rows to the dishwasher rack assembly. Replace broken, cracked, or missing clips that no longer hold tines firmly in place. Snaps on easily.
Put rack together and then unseated in dishwasher. Read more
Secures tines in your dishwasher rack to hold dishes and utensils in place. Replace if cracked, broken, or missing to restore proper rack function.
Ordered and installed new parts. Amazingly fast service and user friendly website. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.