Maytag Knob, Dial & Button

This thermostat knob is the control dial that lets you set temperature or cycle settings on compatible Whirlpool appliances. It restores a secure grip and clear position reference so you can select settings easily. What it does

• Replaces a missing, cracked, or stripped thermostat/control knob
• Provides a tactile grip and visible indicator for accurate temperature or cycle selection
• Helps resolve issues where the control is hard to turn or slips on the shaft
• Fits on the appliance's thermostat/control shaft to restore normal operation

• Disconnect power to the appliance before servicing to avoid electrical shock
• Pull the old knob straight off the control shaft; align the new knob's splines with the shaft and push on firmly
• If the knob is tight or stuck, use a non-marring pry tool and work gently to avoid damaging the control panel
• If the shaft or underlying control is damaged, replace the control assembly rather than forcing the knob

This surface burner control knob replaces a worn gas knob on your range or cooktop, restoring a solid feel and precise flame adjustment so you can reliably turn burners on, set heat, and shut them off.

• Mounts on the surface burner valve stem to control gas flow and heat level
• Addresses cracked, stripped, or missing knobs
• Helps when a knob spins without engaging the valve or feels loose
• Restores clear, consistent control of burner on/off and flame settings

• Turn all burner controls to Off, unplug or disconnect power, and allow the surface to cool
• Pull the old knob straight off the valve stem; avoid prying with tools that could damage the panel
• Align the new knob with the stem and press straight on until fully seated
• Verify smooth operation through Off, Ignite, and Low-to-High settings

Color: black. It measures about 2 inches in diameter.

This slide air control is the user-adjustable vent regulator that directs and limits airflow in the appliance, restoring selectable ventilation for proper operation and performance. What it does

• Opens and closes the vent path so you can increase or restrict airflow.
• Replaces a cracked, stuck, or missing slider that prevents proper vent adjustment.
• Helps resolve weak or inconsistent airflow caused by a broken control slide.
• Fits into the appliance's air control assembly to provide smooth, selectable operation.

• One slide air control.

• Disconnect power before beginning any service to avoid shock or injury.
• Typical replacement requires access to the front or control housing; remove panels and retain fasteners for reassembly.
• Handle plastic components gently to avoid cracking; ensure the slider is aligned in its track before securing panels.
• Test operation after reassembly to ensure the airflow selector moves freely and vents appropriately.

Color: White/chrome

A replacement burner knob for electric ranges that restores reliable control of a surface element. Simple, direct fit for the matching original control shaft and restores user control of heat settings. What it does

• Replaces a worn, melted, cracked, or missing burner control knob to allow safe adjustment of the surface element.
• Engages the stove/range control shaft so settings click and hold as intended.
• Helps prevent slipping or inaccurate temperature selection caused by a damaged knob.
• Matches the original shape and fit for intuitive operation.

• One replacement burner knob (single).

• Install is typically plug-and-play: pull off the old knob and push the new knob onto the control shaft; no tools usually required.
• Disconnect power to the appliance before working near controls if removing any control panel components.
• If the knob does not seat properly, stop and verify shaft style to avoid damage.

Control knob that replaces a damaged or missing range control knob, restoring safe, reliable selection of heat settings. Provides secure grip and positive detents for accurate temperature adjustment on electric range controls. What it does:

• Fits onto the control shaft to select heat levels for electric surface burners or range controls.
• Replaces cracked, stripped, loose, or missing knobs that won't turn or slip on the shaft.
• Restores clear tactile stops and improves ease of setting burner or oven heat.
• Helps eliminate unsafe or imprecise temperature control caused by a compromised knob.

• Disconnect power to the appliance before servicing to avoid shock or injury.
• Pull the old knob straight off the control shaft; align splines and push the new knob on until fully seated.
• If the knob does not fit or the shaft is damaged, do not force the part—inspect and replace the underlying switch or shaft assembly if needed.
• Restore power and verify correct operation of all control settings after installation.

This replacement gas control knob restores positive, easy control of a range burner valve so you can adjust flame settings and operate the burner smoothly. Simple swap for a worn, stripped, or missing knob. What it does:

• Turns the burner valve to set flame height and turn the burner on/off
• Replaces cracked, stripped, loose, or missing knobs that slip on the valve stem
• Restores tactile, indexed control for accurate heat adjustments
• Helps eliminate spinning or wobbling while you operate the burner

• Always shut off the appliance power and gas supply before servicing.
• Most installs are push-on: pull the old knob straight off the valve stem and align the new knob's splines, then push until seated.
• If the knob won't seat or the valve stem is damaged, stop and inspect the valve; do not force the knob.

Replacement control knob that restores user control of the appliance's front-panel settings. It provides a positive grip for selecting cycles, temperatures, or timers so you can operate the appliance safely and accurately. What it does

• Turns the control shaft to select cycles, temperatures, or timer settings.
• Replaces cracked, stripped, loose, or missing knobs that are hard to grip or won't turn.
• Restores tactile feedback for reliable selection of settings.

• Most installs are straightforward—align the knob splines with the control shaft and press until fully seated; some models may use a retaining clip.
• Always disconnect power to the appliance before servicing controls to avoid shock or injury.
• Inspect the control shaft and retaining clip for damage; replace damaged components before installing the new knob.

This control knob replaces a worn, cracked, or stripped stove/oven control interface to restore positive grip and accurate setting selection. It gives a simple, direct replacement to get appliance controls turning smoothly again. What it does:

• Fits onto splined control shafts to allow safe, tactile selection of heat and cycle settings
• Replaces knobs that are loose, cracked, melted, or missing
• Prevents slipping and improves accuracy when changing settings
• Restores a secure, ergonomic surface for manual control

• Disconnect power to the appliance before removing or installing the knob
• Pull the old knob straight off the control shaft; align the splines and push the new knob on until fully seated
• Do not force or hammer the knob onto the shaft; check fit and function before restoring power
• If the control shaft is damaged or the knob does not seat properly, replace the underlying control.

This white timer skirt is the decorative bezel that surrounds and protects the timer control on the appliance's control console, restoring a clean, finished appearance and helping keep debris away from the timer mechanism. What it does:

• Covers and protects the timer/control opening on the console
• Secures the timer knob area and helps keep dust and crumbs out of the control cavity
• Restores a clean, uniform look when the original skirt is cracked, faded, or broken
• Helps ensure the timer knob mounts correctly and operates without obstruction

• Disconnect power to the appliance before starting any repair.
• Typically remove the timer knob and any retaining screws or clips, then lift or snap the old skirt out and install the replacement.
• Align the replacement skirt with mounting tabs and secure without forcing; excessive force can break plastic tabs.

This replacement control knob restores a clean, secure grip so you can select appliance settings smoothly. It fits onto the control shaft to operate the switch or valve when the original dial is cracked, stripped, loose, or missing.

• Turns the control shaft to select temperature, cycle, or function
• Replaces knobs that are cracked, stripped, loose, or missing
• Restores positive engagement with the underlying control
• Common symptoms: knob spins without turning the control, falls off, or wobbles

• Disconnect power; if working on a gas appliance, also shut off the gas supply
• Pull the old knob straight off the shaft
• Align the new knob with the shaft and press straight on—do not force
• If the control stem is damaged, replace the control before installing the new knob

This is a replacement control knob for the freezer temperature control shaft. It restores a secure grip and clear detent positions so you can set the freezer temperature easily. What it does:

• Replaces a cracked, worn or missing freezer temperature control knob
• Provides a firm grip and visible setting position for accurate adjustment
• Allows the control shaft to turn and stay at selected settings
• Helps resolve symptoms like a loose, spinning or non-engaging knob

• Disconnect power to the appliance before attempting replacement
• Pull the old knob straight off the control shaft; align and push the new knob fully onto the shaft until it seats
• If resistance is felt, stop and inspect the shaft and knob for debris or damage before forcing
• If the control shaft is damaged or the knob does not secure properly, replace the control.

This replacement top burner knob restores smooth, reliable control of your cooktop or range surface burner. Use it to turn the burner on/off and adjust heat when the original knob is cracked, stripped, or missing.

• Mounts on the burner valve or switch stem to control flame/heat level
• Replaces knobs that are broken, loose, or no longer engage the stem
• Helps resolve issues like spinning freely, falling off, or hard-to-set heat
• Restores precise burner control and a clean, finished look

• Allow the appliance to cool; disconnect power and shut off gas before servicing
• Pull the old knob straight off the stem; do not pry on the valve stem
• Align the new knob with the stem and press straight on until fully seated
• The knob markings match the correct burner position before use

This control knob replaces a worn or missing dial so you can reliably select settings on your appliance. Restore smooth, positive control and a like-new look when an old knob cracks, strips, wobbles, or falls off.

• Attaches to the control shaft so you can choose functions, temperatures, or speeds
• Provides a secure grip for accurate adjustments
• Typical symptoms include a cracked or missing knob, loose or wobbly feel, spinning without engaging, or difficulty turning to Off
• Direct replacement designed to fit the original control stem on compatible models

• Turn the appliance off and allow any hot surfaces to cool
• Pull the old knob straight off the control shaft; avoid prying against the console
• Align the new knob with the shaft and press straight on until fully seated
• Test operation to ensure the pointer aligns with Off and the control engages properly

A replacement selector knob that fits on the appliance control panel so you can choose cycles or settings with a secure, easy-to-turn control. Restores lost or damaged knobs for reliable panel operation. What it does:

• Fits onto the control shaft to let you change cycles, temperatures or functions
• Replaces a cracked, stripped, or missing selector knob to restore tactile control
• Provides a positive detent feel so selections stay in position during use
• Works with compatible Whirlpool control panels that accept this shaft-mounted knob

• Disconnect power (unplug or shut off breaker) before servicing the control panel
• Pull the old knob straight off the control shaft; push the new knob fully onto the shaft until it seats
• If the control shaft is damaged, replace the underlying control or shaft adapter as needed