Maytag Knob, Dial & Button

This replacement control knob restores a clean, secure grip so you can select appliance settings smoothly. It fits onto the control shaft to operate the switch or valve when the original dial is cracked, stripped, loose, or missing.

• Turns the control shaft to select temperature, cycle, or function
• Replaces knobs that are cracked, stripped, loose, or missing
• Restores positive engagement with the underlying control
• Common symptoms: knob spins without turning the control, falls off, or wobbles

• Disconnect power; if working on a gas appliance, also shut off the gas supply
• Pull the old knob straight off the shaft
• Align the new knob with the shaft and press straight on—do not force
• If the control stem is damaged, replace the control before installing the new knob

This is a replacement control knob for the freezer temperature control shaft. It restores a secure grip and clear detent positions so you can set the freezer temperature easily. What it does:

• Replaces a cracked, worn or missing freezer temperature control knob
• Provides a firm grip and visible setting position for accurate adjustment
• Allows the control shaft to turn and stay at selected settings
• Helps resolve symptoms like a loose, spinning or non-engaging knob

• Disconnect power to the appliance before attempting replacement
• Pull the old knob straight off the control shaft; align and push the new knob fully onto the shaft until it seats
• If resistance is felt, stop and inspect the shaft and knob for debris or damage before forcing
• If the control shaft is damaged or the knob does not secure properly, replace the control.

This control knob replaces a worn or missing dial so you can reliably select settings on your appliance. Restore smooth, positive control and a like-new look when an old knob cracks, strips, wobbles, or falls off.

• Attaches to the control shaft so you can choose functions, temperatures, or speeds
• Provides a secure grip for accurate adjustments
• Typical symptoms include a cracked or missing knob, loose or wobbly feel, spinning without engaging, or difficulty turning to Off
• Direct replacement designed to fit the original control stem on compatible models

• Turn the appliance off and allow any hot surfaces to cool
• Pull the old knob straight off the control shaft; avoid prying against the console
• Align the new knob with the shaft and press straight on until fully seated
• Test operation to ensure the pointer aligns with Off and the control engages properly

A replacement selector knob that fits on the appliance control panel so you can choose cycles or settings with a secure, easy-to-turn control. Restores lost or damaged knobs for reliable panel operation. What it does:

• Fits onto the control shaft to let you change cycles, temperatures or functions
• Replaces a cracked, stripped, or missing selector knob to restore tactile control
• Provides a positive detent feel so selections stay in position during use
• Works with compatible Whirlpool control panels that accept this shaft-mounted knob

• Disconnect power (unplug or shut off breaker) before servicing the control panel
• Pull the old knob straight off the control shaft; push the new knob fully onto the shaft until it seats
• If the control shaft is damaged, replace the underlying control or shaft adapter as needed

This replacement control knob restores a worn, cracked, or missing range/stove control interface so you can safely and accurately set cooking temperatures and modes. Simple, direct fit for compatible Whirlpool control shafts. What it does:

• Replaces a damaged or missing range/stove control knob so settings can be adjusted reliably
• Provides a solid grip and clear pointer for selecting temperature or function
• Stops slipping or spinning when the original knob has become loose or worn
• Helps prevent accidental setting changes from a broken or hard-to-turn control

• Disconnect power to the appliance (and shut off gas if applicable) before servicing
• Align the knob splines with the control shaft and push straight on until fully seated
• Verify proper operation by turning the control through its settings after reconnecting power
• If the knob does not seat or turn smoothly, do not force it—inspect shaft and replace damaged components as needed

This timer knob replaces a worn or broken control knob and restores a clear, easy-to-grip timer control. The biscuit finish matches neutral appliance trims for a clean, factory look. What it does:

• Fits over the appliance timer shaft so you can set cook/dry cycles or timer functions
• Provides a tactile grip and clear pointer for accurate timer selection
• Replaces faded, cracked, or stripped knobs that no longer turn or stay engaged
• Matches biscuit-colored control panels for a seamless appearance

• One timer knob (biscuit)

• Remove power to the appliance before servicing to avoid injury
• Pull the old knob straight off the timer shaft; align the new knob's splines and press on until seated
• No wiring or tools typically required, but for model-specific instructions

This replacement control knob restores a worn or broken stove/oven control interface so you can set temperatures and heat levels accurately. It fits onto the appliance's control shaft for reliable operation. What it does

• Replaces a damaged, cracked, or missing control knob so settings can be changed easily.
• Engages the control shaft spline to select oven/range heat or function positions.
• Helps eliminate slipping or loose-feel when turning the control.
• Appropriate when the original knob is stripped, hard to grip, or will not stay in place.

• Disconnect power to the appliance (and shut off gas if applicable) before servicing.
• Align the knob with the splined control shaft and push straight on until fully seated; do not force.
• If the shaft spline is damaged or the new knob does not fit securely, the control/switch may need replacement.
• Use basic hand tools only; for any electrical or gas-related repairs.

This control knob replaces a worn, cracked, or missing round knob used to select settings on ranges and ovens. It restores a secure, easy-to-grip interface so you can accurately set temperature and cooking functions. What it does:

• Fits onto the appliance control shaft so you can turn and select heat or function settings
• Provides a firm grip and clear pointer for accurate adjustments
• Restores smooth on/off and setting changes when the original knob is loose, stripped, or broken
• Helps prevent accidental setting changes from a missing or damaged knob

• Disconnect power to the appliance (unplug or switch off circuit breaker) before starting
• Pull the old knob straight off the control shaft; align the new knob with spline and push on until seated
• Do not force or hammer the knob onto the shaft; verify the pointer aligns with the control indicator

This is a replacement white gas control knob that restores manual burner control and a finished look to the cooktop. Easy-to-grip design lets you set flame level precisely for safe, consistent cooking. What it does:

• Fits onto the range valve stem to turn gas burners on and off and adjust flame intensity
• Replaces cracked, melted, faded, or missing knobs that prevent proper control
• Helps stop accidental gas flow when a knob is stuck, damaged, or slipping on the stem
• Restores a uniform appearance to the cooktop when original knobs are worn

• One white gas control knob

• Turn off all appliance power and gas supply before removing or installing the knob
• Pull old knob straight off the valve stem; align new knob spline and push on until seated
• If knob is tight or won't seat, inspect valve stem for debris or damage; do not force
• If you smell gas or suspect a leak after installation, stop use.

This replacement control knob fits gas cooktops and restores intuitive control of burner flame settings for safe, consistent cooking. Made to match the OEM fit and feel for smooth, reliable operation. What it does:

• Replaces a cracked, stripped, or missing burner control knob so you can select low-to-high flame settings.
• Allows proper engagement with the valve stem splines for accurate temperature control.
• Helps stop slipping, wobbling, or a knob that won't turn or stay set.
• Restores a complete, easy-to-grip control surface for safer burner adjustments.

• One control knob for a gas cooktop valve stem.

• Turn off the cooktop and gas supply and ensure all surfaces and burners are cool before installing.
• Align the knob splines with the valve stem and push firmly until fully seated; do not force if it won't align.
• If you smell gas, stop and ventilate the area; do not install.

Color: Black