Maytag Knob, Dial & Button

This replacement control knob restores smooth, precise adjustment of your cooktop's surface burner. A worn or cracked knob can be hard to turn or fail to set the flame correctly—swap it out to regain reliable control and a clean, finished look.

• Turns the surface burner valve stem to control flame/heat level
• Helps fix symptoms like slipping, sticking, cracks, or missing knob
• Restores accurate burner setting and easy grip for daily use
• Color-matched to blend with compatible appliances

• Disconnect power and allow all burners to cool before servicing
• Pull the old knob straight off the valve stem; align and press on the new knob
• Do not force—verify the flat (D) orientation on the stem matches the knob insert
• Test each burner for proper operation after replacement

This surface burner knob replaces a worn or missing control knob on your gas cooktop or range, restoring precise flame adjustment and a clean, finished look. It fits onto the burner valve stem for smooth, reliable operation.

• Turns the surface burner valve to control flame level from low to high
• Common fix for knobs that are cracked, stripped, loose, hard to turn, or missing
• Helps when burner heat is difficult to set or won't hold steady
• Restores consistent, easy-to-grip control of the burner

• Turn off power and ensure all burners are cool before starting; shut off gas supply if working near the control area
• Pull the old knob straight off the valve stem—do not pry against the control panel
• Align the new knob with the stem orientation and press firmly until fully seated
• Test burner operation to confirm smooth adjustment through the full range

Color: White

A replacement grounded-heat safety label that restores the appliance's original heat/grounding marking so important safety information remains visible. Ideal when the original label is torn, faded, or missing. What it does:

• Replaces a damaged or missing grounded-heat safety label so warnings and grounding info are readable.
• Identifies heat/grounding points and cautions about hot surfaces to help owners stay safe.
• Helps maintain the appliance's original safety markings needed for proper service and inspection.
• Adhesive-backed label designed to be applied to the appliance at the OEM-specified location.

• Clean and dry the surface thoroughly before applying to ensure proper adhesion.
• Peel backing and press the label firmly into place; avoid stretching or folding.
• Install in the OEM specified location; refer to the appliance diagram for exact placement.
• Disconnect power before servicing the appliance to access the label area safely.

This thermostat knob is the control dial used to set temperature on compatible ranges and ovens, restoring a clear pointer and easy grip when the original knob is cracked, faded, or missing. It provides a simple, user-facing control for the appliance thermostat. What it does:

• Turns the thermostat control shaft to select cooking temperature settings.
• Replaces cracked, worn, broken, loose, or missing knobs that make temperature adjustments difficult.
• Restores a visible pointer/indicator for accurate temperature selection.
• Improves grip and tactile feedback for safer, easier temperature changes.

• Turn appliance controls OFF and cool before replacing the knob.
• Remove the old knob by pulling it straight off the control shaft; align the new knob splines with the shaft and push on until fully seated.
• If the knob is stuck, use gentle rocking while pulling; do not pry on surrounding surfaces or force the shaft.

This white control knob fits an infinite switch for a surface element. It lets you turn the burner on/off and smoothly adjust heat, restoring secure control and a clean look when the original knob is cracked, stripped, or missing.

• Attaches to the infinite switch to turn the surface element on/off and adjust heat
• Restores a secure grip and engagement when the old knob is cracked, loose, or stripped
• Helps ensure proper alignment with the control markings for accurate settings
• Common symptoms: knob broken, missing, wobbly, hard to turn, or won't stay on the shaft

• Turn off power to the appliance to prevent unintended activation during replacement
• Pull the old knob straight off the switch shaft; avoid prying on the control panel
• Align the new knob with the shaft orientation and press straight on until fully seated
• Verify the pointer aligns to Off before restoring power

Color: White/chrome

Gas valve burner control knob. Color: White. It measures about 2 inches in diameter. For black order WP74011260.

This burner knob replaces a worn or damaged control knob on ranges and cooktops, restoring a secure grip and clear settings for safe, reliable heating control. Simple swap keeps controls looking and functioning like new. What it does:

• Fits onto the stove/cooktop control shaft to select burner heat levels.
• Restores tactile control when the original knob is cracked, melted, or loose.
• Helps prevent accidental heat changes from slipping or damaged knobs.
• Matches OEM shape and mounting for proper engagement and alignment.

• One replacement burner control knob.

• Remove power to the appliance or disconnect gas for safety before servicing.
• Pull off the old knob and push the new knob straight onto the control shaft until seated.
• Do not force or rotate excessively during installation; confirm proper fit and function before normal use.

Color: Bisque

This replacement control knob restores a worn or broken factory knob so you can easily and safely set your appliance's functions. It provides a simple push-on fit to make appliance adjustments quick and reliable. What it does

• Replaces a damaged or missing control knob so settings can be selected accurately
• Restores tactile grip and clear pointer alignment for repeatable control
• Helps prevent slipping or accidental changes to selected settings
• Fits the original control shaft for correct operation when installed

• Disconnect power to the appliance before servicing to reduce shock risk
• Remove the old knob by pulling straight off the shaft; align the new knob's splines and push on until fully seated
• Verify proper seating and function before returning the appliance to normal use
• If the knob feels loose or won't engage, stop and check shaft type and part number compatibility

Color: White

Control knob that replaces a damaged or missing appliance dial to restore simple, reliable selection of temperature or cycle settings. Provides a secure grip and clear position control for everyday use. What it does:

• Replaces cracked, worn, stripped, or missing control knobs so you can select settings reliably.
• Mounts on the appliance control shaft to allow accurate pointer alignment and selection.
• Reduces slipping, spinning, or inconsistent selection when turning the dial.
• Restores the user interface so controls are easier and safer to operate.

• Disconnect power to the appliance before servicing controls.
• Most knobs simply pull off the control shaft and the replacement presses on until seated.
• If the original knob used a set screw or retaining clip, save and reinstall that hardware.
• If the knob does not seat easily, stop and verify shaft type and fit to avoid damage.

This white valve knob replaces a worn, cracked or missing control knob so you can safely and easily adjust burner or oven settings. It restores a secure grip and precise control for temperature or flame adjustments. What it does:

• Replaces a damaged or stripped control knob used to turn gas or electric valve controls
• Provides a positive grip so settings can be changed smoothly and accurately
• Helps stop slipping or spinning that prevents proper temperature or flame adjustment
• Matches original fit to engage the control shaft properly when installed

• Turn off power and gas supply before removing the old knob
• Pull off the old knob straight from the control shaft; align splines and push new knob fully onto the shaft
• Do not force or hammer the knob; ensure it seats squarely to avoid damage
• Test control operation after installation and restore power/gas only when connection is secure

A replacement burner knob for electric ranges that restores reliable control of a surface element. Simple, direct fit for the matching original control shaft and restores user control of heat settings. What it does

• Replaces a worn, melted, cracked, or missing burner control knob to allow safe adjustment of the surface element.
• Engages the stove/range control shaft so settings click and hold as intended.
• Helps prevent slipping or inaccurate temperature selection caused by a damaged knob.
• Matches the original shape and fit for intuitive operation.

• One replacement burner knob (single).

• Install is typically plug-and-play: pull off the old knob and push the new knob onto the control shaft; no tools usually required.
• Disconnect power to the appliance before working near controls if removing any control panel components.
• If the knob does not seat properly, stop and verify shaft style to avoid damage.

This surface burner control knob restores smooth, precise heat selection on your cooktop or range. Replace a cracked, loose, or missing knob to regain clear settings and confident control with a clean, factory look.

• Attaches to the burner valve/infinite switch shaft to turn the surface burner on/off and adjust heat
• Resolves issues like slipping, wobbling, or a knob that won't turn or stay on the stem
• Helpful when indicator markings are worn or hard to read
• Returns the front panel to a clean, factory appearance with the correct fit

• Ensure all controls are off and the cooking surface is cool before starting
• Pull the old knob straight off the stem; do not pry against the panel
• Align the new knob with the stem and press firmly until fully seated
• Turn through all settings to verify smooth, accurate operation