Maytag Knob, Dial & Button

The timer dial fits over the timer shaft on the control panel. It displays cycle options and provides a secure, aligned surface for the knob to rotate the timer so selections line up correctly.

• Surrounds the timer knob and shows cycle names/markers
• Aligns with the timer so the knob can index and turn settings properly
• Typical symptoms: cracked or broken ring, faded markings, loose/wobbly dial, difficulty selecting or aligning cycles
• Direct-fit replacement of the original timer dial

• Disconnect power to the appliance
• Pull off the timer knob; remove any retaining clip or nut if present
• Lift off the old dial; align the new dial with the panel indexing and timer shaft, then press into place
• Reinstall the retainer and knob; restore power and verify alignment

This small button fits into the microwave door handle to cover the mounting screw opening, restoring a clean, factory look. Replace a missing or damaged button to refresh appearance and help keep the handle area tidy.

• Covers the handle's mounting screw opening for a finished appearance
• Helps keep debris out of the handle cavity
• Replaces a lost, cracked, or discolored button
• Common signs include a missing cap, visible screw, or a loose/broken button

• Disconnect power before servicing any microwave
• Gently pry out the old button; avoid scratching the handle—use a plastic tool if needed
• Align the new button with the opening and press until fully seated
• If your model requires door disassembly, microwaves can retain high voltage.

This replacement control knob restores reliable, easy adjustment of your appliance's settings. Use it when the original knob is cracked, stripped, loose, or missing to regain precise control and a secure grip. What it does:

• Re-establishes firm manual control for setting temperatures, cycles, or power levels.
• Replaces cracked, worn, or stripped knobs that slip or won't turn properly.
• Restores alignment of the selection indicator for accurate setting reference.
• Provides a direct fit onto the appliance's control shaft splines for secure operation.

• Always disconnect power to the appliance (and shut off gas for ranges) before servicing.
• Remove the old knob by pulling it straight off the control shaft; align splines and push the new knob on until fully seated.
• If the knob won't seat easily or slips after installation, do not force it — inspect the control shaft splines for damage.

Color: chrome. The main part of the knob is about 1 inch in diameter. The handle is about 2 inches.

This surface burner knob fits the valve stem for a cooktop/range burner control. It restores a secure grip and accurate adjustment when the original knob is cracked, stripped, loose, or missing.

• Attaches to the surface burner valve stem to turn the burner on/off and adjust flame level
• Replaces a knob that slips, won't stay on, cracks, melts, or free-spins
• Helps restore proper Off alignment and a clean, finished look

• Ensure all controls are in the Off position; disconnect power and shut off gas as a safety precaution
• Pull the old knob straight off the valve stem—do not pry sideways
• Align the flat/D-shaped opening with the valve stem and press firmly until fully seated
• Verify smooth operation and correct Off alignment before restoring power/gas

Color: Black. For biscuit use WP8522567. For white use WP8522565.

Color: Black. It measures about 2 inches in diameter.

This selector knob attaches to the control shaft so you can choose cycles and options on your appliance. Replace a cracked or stripped knob to restore smooth, accurate settings without forcing or damaging the control stem.

• Attaches to the control shaft to operate the cycle/timer or option switch
• Common symptoms: knob is cracked, stripped, loose, spins freely, falls off, or is missing
• Restores positive, accurate control feel when selecting settings

• Disconnect power before servicing
• Pull the old knob straight off the shaft; avoid prying against the control panel
• Align the keyed/flat side and press the new knob on until fully seated
• If your original knob used a spring clip or insert, transfer it to the new knob before installation

This white switch knob replaces a damaged or missing control knob, restoring a clean look and smooth, confident operation when selecting settings. It press-fits onto the control shaft so you can adjust functions without wobble or slip.

• Attaches to the control switch shaft to turn and select settings
• Replace if the knob is cracked, stripped, loose/wobbly, or missing
• Common symptoms: knob falls off, won't engage the switch, or is hard to turn
• Normal wear, heat, or impact can damage the original knob over time

• Disconnect power and ensure the appliance is cool before servicing
• Pull the old knob straight off the shaft; avoid prying against the panel or switch stem
• Align the new knob with the shaft and press straight on until fully seated
• Verify alignment with the OFF position and test operation

Color: black. It measures about 2 inches in diameter.

Color: White

Color: White. Measures about a little over 2 inches in diameter. For black order WP74011287.

This replacement surface burner knob restores reliable control of your cooktop or range. It attaches to the control shaft so you can turn the surface element/burner on and accurately adjust the heat level. What it does:

• Mounts on the surface control valve/switch shaft to select OFF and adjust heat settings
• Replaces knobs that are cracked, stripped, loose, or missing
• Helps resolve issues like a knob spinning freely, wobbling, or not staying on the stem
• Restores confident, consistent control over the surface burner/element

• 1 surface burner knob

• Disconnect power and allow all burners to cool; if applicable, shut off gas
• Pull the old knob straight off the control shaft—do not pry against the panel
• Align the new knob with the shaft and press straight on until fully seated
• Verify smooth operation and OFF alignment; reseat if needed

This knob assembly replaces the "modifier" control knob on the console so you can adjust settings smoothly and reliably again. Restore a secure, positive-turn feel when the original knob is cracked, stripped, or missing.

• Attaches to the control shaft to select and adjust options/settings
• Replaces knobs that are cracked, broken, or missing
• Fixes a knob that spins freely, slips, or won't turn the control
• Restores proper selection and tactile feedback during use

• Disconnect power to the appliance before servicing
• Pull the old knob straight off the shaft; avoid prying against the panel
• Align the flat/splines on the new knob with the shaft and press on firmly until fully seated
• The pointer aligns with the panel markings before use

This is the thermostat knob that mounts on the control shaft so you can set the temperature. Replace a cracked, stripped, or missing knob to restore smooth, reliable adjustments and clear control of your settings.

• Attaches to the thermostat shaft to select and adjust temperature
• Restores secure engagement if the original knob is cracked or stripped
• Helps ensure settings can be changed as intended
• Common signs include a loose, wobbly, broken, or missing knob

• Disconnect power and allow the appliance to cool before servicing
• Pull the old knob straight off the control shaft; avoid prying that could damage the shaft
• Align the new knob with the keyed/flat side of the shaft and press on firmly
• If your model uses a set screw, align the knob and tighten it before testing operation

The Grommet is an OEM part for Whirlpool gas cooktops. It forms a protective barrier and seal where wiring or mounting bolts pass through ventilation cutouts.

Causes of a bad grommet typically include degradation of the rubber material over time due to heat exposure during cooking. Physical stress from repeated installation/removal can also crack or loosen the seal.

Symptoms of a bad grommet include:

• Air leaks appearing around wiring/bolt openings  
• Drafts disturbing burner or element temperatures
• Noise from loose fixtures rattling 
• Risk of sparks near exposed connections

Replacing with an OEM grommet restores the protective seal while blending seamlessly with range aesthetics. Compatible brands include KitchenAid, Jenn-Air, and select Kenmore cooktop models.