Need Help?
Call or text
Adjustable leveling leg installs on the front or rear corners of your range. Replace if broken, cracked, or worn to stabilize and level your appliance.
Installed it according to video watched. Read more
Ice won't switch between crushed and cubed? The dispenser solenoid controls the crusher mechanism. Most DIYers replace it in 25-30 minutes with basic tools.
Although the solenoid I purchased did not fix the problem, nor the "mother electronic board", or the motor, my experience with Appliance Parts Pros has been excellent. Extremely easy to look-up parts for my model refrigerator. Best part is their video instruction that gives you step-by-step hands-on how to remove and install. I would highly recommend these folks. If a lady such as myself can do repairs based on their instruction, anyone can. Thank you for providing such an informative... Read more
Ice dispenser not working or coupling spins freely? This motor coupling connects the dispenser motor to the auger. 10-minute fix with channel lock pliers.
I first thought it was the auger in the ice container so I changed it and it was not the problem. I then talked to ApplianceParts customer service that it might be the yoke on the motor that turned the auger or even the motor itself even though it worked. I ordered the parts, the yoke was supposed to be able to be changed by itself but mind would not come off the motor shaft so I had to cut it off just to remove it from the unit so I had to change the motor anyway because of this. So I advise... Read more
Ice maker not producing ice? This complete ice maker kit replaces failed units in 30-60 minutes. Includes all components to restore ice production.
Purchased the kit, followed instructions, within 30 minutes had the new ice maker installed. Works wonderfully. We were quoted over $350 to fix it from a repair agent, but it only cost $150 including shipping from you guys. Very happy. Read more
This replacement wire harness routes electrical power and control signals between components in your appliance. Replacing a damaged harness helps restore reliable operation and prevents intermittent electrical issues caused by broken or overheated wiring.
Ice maker stopped making ice or won't turn off? This ice level control board monitors bin levels to control ice production. Simple DIY repair.
Bought new optic control boards, both the emitter and the receiver. The repair process was so simple. The KitchenAid repair tech came out to diagnose our issue. He was only going to come back and install a new emitter. They wanted a lot of money to do the repair. They were going to charge us $257 just for the part (emitter board). We bought both boards for $300 from AppliancePartsPros. We decided to replace both boards, because if one went bad the other might not be far behind. Read more
Fix frost buildup and grinding noises with a refrigerator defrost heater. Melts ice on evaporator coils. Video guide included for easier installation.
Replaced heating element and thawed out ice buildup. Read more
Freezer frosting over and fridge warm? This defrost thermostat senses evaporator temperature to control defrost cycles. DIY-friendly repair fix.
Ended up being the defrost sensor. Ordered the heater and control board just in case. Started with the control board still didn't defrost. replaced the sensor and all is well. Super helpful tech staff answered all my questions... Read more
Fix food freezing in fresh food or crisper drawers with this refrigerator air damper assembly. Regulates airflow between compartments. DIY video included.
Checked air damper, it was blocked with ice. Replace it and defrosted it. Good to go. Read more
Vertical divider rail between refrigerator doors. Replace if cracked, broken, or not sealing properly. Installs with one screw. Easy DIY replacement.
Received exact part and easy to replace, took all of 5 minuets to replace. All you need is a 1/4" nut driver or 1/4" wrench. Super easy ! Read more
Structural support that holds the crisper drawer frame in place. Replace if cracked, broken, or missing. Slides into liner holes for stability.
Replacement of parts found on this site- great explanation and pictures as shown! Read more
Freezer not cooling or making loud noise? This evaporator fan motor circulates cold air throughout compartments. Common DIY repair for temperature issues.
The fan blade had vibrated down the shaft of motor and was hitting the fan supports. I replaced motor and new fan blade. The motor was still operating but since I had everything opened up I changed out the motor anyway. Freezer working fine now. The only unforeseen problem is there was a black wire that had to be transferred to the three prong wiring harness. Read more
Houses and protects your refrigerator's water filter. Replace if cracked, leaking, or seals are worn to prevent water damage and maintain water quality.
Rubber door gasket seals the refrigerator compartment to prevent air leaks and temperature loss. Replace if torn, cracked, or not sealing properly.
Replaced door seal as per video from your resources. went very well no problems Read more
Ice not dispensing from your refrigerator? The auger motor powers the mechanism that pushes ice through the chute. Moderate DIY repair with basic tools.
Installed a AP6007346 motor Read more
Fix water leaking from ice maker or low water flow to dispenser with this refrigerator water inlet valve. Controls water to ice maker and dispenser.
The parts were easy to order, arrived quickly, and were good quality. I am very satisfied with my purchase and the service of the appliance parts pros! Read more