Need Help?
Call or text
Fix washer leaks, overfilling, or no water flow issues. This 3-way inlet valve controls water routing to wash and dispenser. Simple DIY repair in 15-20 min.
I changed the water inlet (3 way). Now my washing machine working properly with fabric softener. The parts i order is a next day delivery. Thanks appliace partspros. Read more
Fix continuous water flow or won't-stop-filling issues with this washer hot water inlet valve. Controls hot water during fill cycles. DIY-friendly, 30-minute repair.
After researching on line I was able to narrow down the problem to either the cold water of hot water fill valve. These valves are electronically controlled and can go bad thus causing the washing machine to not fill properly. Nf stands for "no fill". I replaced the cold water valve first which was held by two screws and a couple of wires. It literally took me 5 minutes to replace the part. As soon as I started the wash cycle I could tell I had fixed the problem because the humming noise that... Read more
Fix washer not filling, slow fill, or LF error codes. This water inlet valve controls water flow into your washer. Moderate DIY repair, 30-45 minutes.
I simply replaced the existing water intake assembly with the one that I purchased from the Appliance Parts Pros and the washer now functions like new! Very fast delivery and exact part as my original. Thanks! Read more
Fix washer that won't fill, shows OE/NF error, or keeps running water even when off. Cold water inlet valve replacement takes 5-10 minutes with basic tools.
Fix a washer that won't fill with cold water or fills continuously. This water inlet valve controls hot and cold fill cycles. DIY-friendly repair.
Thanks to Appliance Parts Pros® I was able to replace that old water valve drip with a new valve. Simply unplug power cord, turn off water, disconnect hoses from machine, with front off machine and top unscrewed, tilt top back and unplug wires to old valve remove screws holding valve from back of machine, remove small hose from old valve to top ring and replace if worn. Then just attach wire harness to new valve, screw valve to back using old screws (2), attach hose to top ring, close top of... Read more
Fix water leaking onto the floor or high-pitched squealing during fill. This washer water inlet valve is a common fix. DIY repair takes about 2 hours.
At first I replaced the water intake hoses which did nothing to remedy the noise. I watched a you tube on how to repair - repair was rated 2 (5) 'hammers' - easy. I ordered the part via Appliance Parts pro website - extremely easy. It shipped that day and arrived the next and included every part I needed. I followed the you tube video while completing the repair myself (female 62). It took me 2 hours to complete the whole job. The washer is now quiet on water intake (fill). No more high... Read more
Fix low flow error codes or slow filling with this washer water inlet valve. Controls water flow into the tub. Takes about 10-20 minutes to install.
Replaced both hot and cold water inlet valves. Works like a charm, issue resolved. Read more
Fix washer leaking from base or not filling with water. This water inlet valve controls hot and cold water flow into your washer tub. Easy DIY fix.
Usually ships within 4 - 14 days
Fix washer LF error code or slow filling with this water inlet valve. Common DIY repair taking 30-45 minutes. Includes new wiring harness for easier install.
Googled the model number with the trouble code LF and was given a result of "bad fill valve " 99% the problem. Entered the model number with part discerption, Appliance Part Pros .com came up with the part availability . ordered it researched on you tube found a few vids on how to change none where right , But after removing the control panel and then the back could see how too get it out , the new pat came with new wiring harness so that made it even easier. After repair ran machine... Read more