Range / Cooktop / Oven Burner & Related Parts

Sits under the cooktop and channels gas from the valve to the front burner head. Replace if cracked, kinked, bent, or broken from lifting the cooktop.

This natural-gas burner orifice spud meters the correct fuel flow for a 15,000-BTU surface burner. Replacing a clogged, damaged, or wrong-size orifice restores proper flame size, cleaner combustion, and reliable cooktop performance. What it does:

• Meters gas through a calibrated opening to the burner head for correct flame height
• Sized for a 15,000-BTU surface burner using natural gas
• Installs in the orifice holder/valve body beneath the burner
• Typical symptoms of a faulty or mismatched orifice: weak/small flames, yellow/sooty flames, uneven heating, delayed ignition, burner won't reach high heat

• 1 natural-gas 15,000-BTU orifice spud

• Shut off gas supply and disconnect power; allow all burners to cool completely
• Remove grates, caps, and burner heads; lift the top or access the orifice holder as required
• Match each orifice to the correct burner location by BTU rating; do not overtighten
• After reassembly, check all connections for leaks with a non-corrosive soap solution and verify proper flame color/size

• For natural gas applications only; use the correct LP/propane orifice when converting fuel types

This is a black burner cap that sits on top of a small surface burner on a gas range. It distributes the flame evenly around the burner for consistent heating. Replace this cap if it is chipped, cracked, warped, or if you notice uneven or yellow flames on the small burner.

LP conversion kit for gas ranges switching from natural gas to propane. Includes LP orifices, regulator, and instructions for safe installation.

Replace your cracked or damaged gas range burner head assembly. This black burner head component ensures proper fit and flame distribution when installed.

Oven won't heat or ignite? A faulty gas control valve prevents gas flow to the burner. Moderate DIY repair restores reliable baking in 1-2 hours.

Replaces chipped, cracked, or missing burner cap on your gas range cooktop. This grey cap sits atop the burner base to direct and shape the flame properly.

Color: black. Small size. Measures about 2-1/2 inches in diameter.

Kit contains 4 burner caps

Grill burner for gas cooktops and modular grill accessories. Replace if cracked, corroded, or producing uneven flames. Installs on grill module.

Burner cap set for gas range cooktops. Fits over surface burners to distribute heat evenly. Replace cracked, chipped, or missing burner caps.

Converts natural gas burners to propane with correctly sized orifices for safe, efficient operation. Replaces worn or incorrect orifices during fuel conversion.

Burner base that sits beneath the burner cap on your cooktop. Replace this component if damaged, cracked, or missing to restore your burner's appearance.

Burner head for gas ranges and cooktops. Sits on top of the burner base to distribute flame. Replace if cracked, corroded, or clogged with debris.

Replacement oven bake burner for gas ranges with direct spark ignition. Distributes gas evenly under the oven floor. Replace if cracked, corroded, or damaged.

Burner orifice spud for gas ranges. Meters gas flow to control flame height. Replace if clogged, damaged, or when converting between natural gas and LP.