Range / Cooktop / Oven Heating Element

This surface heating element replaces a failed cooktop coil to restore even, reliable heating for electric ranges. Designed to match original fit and electrical connections for straightforward replacement. What it does:

• Heats cookware when the range control is turned on to provide consistent cooking temperatures.
• Commonly replaces elements that fail to heat, heat intermittently, or do not reach expected temperatures.
• Also used when an element shows visible damage, burning, or breaks at the coil or terminals.
• Works with the range's existing burner receptacle and infinite switch to deliver power to the cooktop.

• Disconnect power at the breaker or unplug the range before starting any repair.
• Allow the cooktop to cool completely to avoid burns; wear gloves to protect hands from sharp edges.
• Remove the old element by gently lifting and pulling it from the terminal block; align and seat the replacement terminals fully.
• Do not overtighten nearby fasteners; verify proper electrical connection and that the element sits flat in the cooktop before restoring power.

This bake element is the oven's lower heating element that produces the consistent heat needed for baking. Replacing a worn or damaged element restores proper oven heating and improves cooking results. What it does:

• Heats the oven cavity from the bottom to provide consistent baking temperatures
• Replaces a burned-out or broken element that prevents the oven from reaching set temperatures
• Helps eliminate uneven baking or undercooked bottoms caused by a faulty lower element
• Works with the oven's existing control and safety systems to heat only when commanded

• Disconnect power to the appliance before starting any repair
• Allow the oven to cool completely and wear gloves to protect hands from sharp edges
• Typically installs from inside the oven or from the rear panel; keep track of mounting screws and wire connectors

Broil element provides the oven's upper heating for broiling and surface browning. Replacing a failed broil element restores broil performance so foods brown evenly and the oven properly completes broil cycles. What it does:

• Produces the high, direct heat used for broiling and top-surface browning.
• Restores heat in the oven's upper cavity when the broil setting is selected.
• Common fix when food doesn't brown, the element doesn't glow, or the broil cycle delivers little heat.
• Works with the oven's broil control and thermostat to achieve required broiling temperatures.

• Disconnect power to the appliance at the breaker before starting any repair.
• Remove oven racks and access the element mounting screws or rear terminal cover as required by your model.
• Handle the element carefully and avoid touching terminals; ensure connections are tight and insulated.
• Replace damaged mounting hardware or connectors before re-energizing the oven.

This oven bake element replaces the lower heating element in compatible electric ranges to restore normal baking and roasting performance. It provides a direct heating surface that converts electrical energy into consistent oven heat. What it does

• Heats the oven cavity during bake cycles to cook food evenly.
• Commonly used when the oven fails to reach set temperatures.
• Visible signs of failure include breaks, blisters, or the element not glowing.

• Disconnect power to the appliance at the breaker before starting work.
• Handle with care; wear gloves to avoid cuts from sharp mounting edges.
• Verify fit and terminal type match your oven before installation.

This surface cooktop element provides the heating source for electric ranges and replaces a damaged or non-working burner to restore normal cooking heat. Designed to match OEM fit and function for compatible Whirlpool ranges. What it does:

• Heats cookware for stovetop cooking when the burner control is turned on
• Replaces a burned-out or broken surface element that no longer heats
• Can resolve symptoms like no heat from the burner, intermittent heating, or visible damage to the element
• Restores even heating when the original element has hot spots or partial failure

• Disconnect power at the breaker or unplug the range before servicing to avoid shock
• Allow the element and cooktop to cool completely before removing or installing
• Remove the old element by unplugging the connector or detaching mounting hardware, then connect the new element securely

This oven heating element provides the heat source for baking and roasting so your oven reaches and maintains cooking temperatures. It restores proper oven heat when the element is damaged or no longer heats evenly. What it does

• Generates heat for the oven cavity so food cooks and browns correctly
• Replaces a visibly broken, burned, or non-glowing bake element
• Helps resolve symptoms like no heating, slow heat-up, or uneven baking
• Works as the lower bake element in standard electric ovens

• One oven heating element

• Disconnect power to the range at the breaker before starting any work
• Installation typically requires removing the oven floor or rear panel and disconnecting terminal wires; keep track of any mounting screws
• Handle the element carefully to avoid bending or contaminating the surface

This lower bake element assembly heats the oven cavity for baking and roasting so you can cook food evenly. It replaces a damaged or failed lower heating element to restore normal oven heating performance. What it does:

• Produces the oven's lower radiant heat used during bake cycles
• Common fix when the oven won't reach or hold set temperature
• Replaces elements that are visibly burned, broken, or arcing
• Helps correct uneven baking when the lower element is not working

• Disconnect power to the appliance at the circuit breaker before servicing
• Allow the oven to cool completely; handle the element carefully to avoid damage
• Inspect wiring and connectors for heat damage and secure connections during installation
• After installation, restore power and run a short bake cycle to verify correct operation

This oven lower bake element is the heating element that warms the oven cavity for baking and roasting. It restores proper baking heat so food cooks evenly and reaches set temperatures. What it does:

• Generates heat for the oven's bake function to cook and brown food
• Commonly causes no-heat or weak-heat oven symptoms when failed
• Can cause uneven baking or longer preheat times if damaged
• May show visible breaks, burn spots, or arcing when defective

• Disconnect electrical power to the appliance before starting any work
• Handle carefully and avoid bending the element; use gloves to protect hands
• Verify proper wire connections and secure mounting during reassembly

This broil element replaces the upper heating element in an electric oven to restore broiling performance and even top-down browning. It heats the top of the oven cavity so broil cycles and high-heat functions work correctly. What it does:

• Provides the high heat at the top of the oven for broiling and browning
• Replaces a burned-out or visibly damaged broil element
• Commonly used when the oven broil setting produces no heat or uneven browning
• Matches OEM form and terminal layout for direct replacement

• Disconnect power to the range at the breaker or unplug before starting
• Handle carefully to avoid bending the element or damaging terminals
• Remove oven racks and any necessary panels for access; support the element while disconnecting wires
• Tighten mounting screws and secure electrical connections before restoring power

This dual radiant surface element replaces a damaged haliant-style cooktop heating element to restore even, powerful surface heating for electric ranges. Designed to match OEM fit and function for compatible cooktops. What it does:

• Heats cookware across two concentric zones for small and large pots
• Replaces a cracked, non-heating, or intermittently working surface element
• Helps fix uneven heating or elements that won't turn on
• Matches OEM electrical and mounting connections for direct replacement

• Disconnect power at the breaker before starting any repairs
• Handle the glass/ceramic element carefully to avoid cracking
• Verify connector fit and secure all wiring; do not force terminals