Range / Cooktop / Oven Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: 12400035
The Flat Style Oven Igniter Kit is an OEM part for Whirlpool ovens. It is designed to ignite the gas in the oven burner, facilitating the start of the heating process. This igniter is crucial for ensuring your oven heats up quickly and efficiently, providing the necessary flame for cooking and baking.
Symptoms of a bad Oven Igniter include:
- The oven failing to heat up or taking a long time to reach the desired temperature.
- A noticeable gas smell when the oven is turned on, indicating the gas is not igniting.
- The igniter glowing without producing a flame, which can point to a lack of adequate temperature to ignite the gas.
Causes of a bad oven igniter can include the wear and breakdown of the igniter element over time, a faulty electrical connection, or a disruption in the gas supply.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Little to no heat when broiling
-
Gas igniter glows, but will not light
-
Little to no heat when baking
-
Gas smell
See more...
Do-It-Yourself Stories from Customers like You
Magic chef broken oven igniter Richard C. • Kew Gardens , NY • July 13, 2015
Followed linked video instructions and replaced with new flat style Oven Igniter Kit. Some repair info background, while out shopping for a replacement oven ($1000 plus) a terrific salesman listened to the issue with my current oven and recalled his same issue and solution. I thanked him for his time and recommendation. I went home and searched "oven Ignitor" where I was led to this website. The video showed the same exact flat oven igniter and how easy it would be to replace it. I immediately...
Read more
More
$47.95
- Compare At:
-
$57.06
- You Save:
-
$9.11
Genuine Ge part
By: Ge
Part Number: WB13X40206
This hot surface oven igniter heats up and lights the gas at the burner. Replacing a weak, cracked, or non-glowing igniter often restores reliable ignition when a gas oven won't heat or preheats very slowly.
- Heats to ignite gas at the oven or broiler burner
- Draws the correct current to open the safety gas valve
- Common symptoms: no heat, intermittent heat, glows but no flame, very slow preheat, no glow at all
- Helps restore consistent burner ignition and temperature recovery
What's included: 1 igniter Install notes:
- Disconnect power and shut off gas; allow the appliance to cool completely
- Handle by the base/bracket only—the ceramic element is very fragile
- Reuse original mounting screws; route wires away from the flame path
- After install, verify a steady bright glow followed by burner ignition
Do-It-Yourself Stories from Customers like You
Oven not heating. Ignition assembly was defective. Love Joy F. • Kahului , HI • February 03, 2023
I was able to remove the culprit part and replace it with a new one. Tested the unit for normal operation unit is working properly.
Read more
More
$62.93
- Compare At:
-
$65.55
- You Save:
-
$2.62
Genuine Frigidaire part
By: Frigidaire
Part Number: 3051162
The Front Drawer Glide is an OEM replacement part for Frigidaire ranges and ovens. It facilitates the smooth opening and closing of the storage drawer typically located at the bottom of the range.
Symptoms of a faulty Front Drawer Glide include:
- Difficulty in opening or closing the drawer smoothly
- The drawer becoming stuck or jammed in its track
- Excessive noise or grinding sounds when operating the drawer
- Visible signs of wear, damage, or misalignment in the glide mechanism
Causes of needing to replace the front drawer glide can include normal wear and tear over time, physical impact or mishandling, or exposure to excessive heat or moisture.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore range and oven models.
Do-It-Yourself Stories from Customers like You
Broken glides on my range drawer John H. • Shelton , WA • September 19, 2014
Replaced guides
Read more
More
$6.95
- Compare At:
-
$8.20
- You Save:
-
$1.25
Genuine Frigidaire part
By: Frigidaire
Part Number: 318254906
The Bake Element is an OEM part for Frigidaire ovens. It is responsible for providing the necessary heat for baking by converting electrical energy into heat within the oven cavity, ensuring even and consistent cooking results. It measures 19-1/2" wide, 15" long, and has 3-1/2" inserts, with a rating of 3400 watts and 240 volts.
Causes of a bad bake element can include normal wear and tear over time, damage from high temperatures, or electrical malfunctions that cause the element to short out or break.
Symptoms of a bad bake element include:
- Uneven baking results
- The oven not reaching the desired temperature
- Visible damage or breakage on the element
- The element not glowing red when in use
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This part fixes the following symptoms
-
Little to no heat when baking
See more...
Do-It-Yourself Stories from Customers like You
Broken Newton W. • Austin , TX • August 23, 2016
With my tools
Read more
More
$153.95
- Compare At:
-
$184.74
- You Save:
-
$30.79
Genuine Whirlpool part
By: Whirlpool
Part Number: W10820036
The Washer Door Switch is an OEM part for Whirlpool washing machines. This component is crucial for ensuring the washer operates safely by detecting whether the door is open or closed. The door switch prevents the washer from starting or continuing its cycle when the door is open, and it allows the machine to function only when the door is securely closed.
Symptoms of a failing Washer Door Switch include:
- The washer not starting or stopping unexpectedly during a cycle
- Error codes related to door closure issues displayed on the washer's control panel
- The washer door not locking properly or the lock mechanism not engaging
- The washer continuing to operate with the door open
Causes of a bad door switch can include wear and tear from frequent use, damage from repeated opening and closing of the door, electrical faults such as short circuits, or physical damage from mishandling or impact.
This OEM Whirlpool part is also compatible with some models from Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore.
This part fixes the following symptoms
-
Will not drain
-
Pumps but will not spin
-
Timer will not advance
-
Doesn't shut off
See more...
Do-It-Yourself Stories from Customers like You
Sometimes the washer wouldn't start the wash cycle when the fill cycle was done it would just sit until the lid was picked up or bumped Eugene N. • Roswell , NM • August 28, 2016
The lid shut-off switch is located behind the lid How About That. I order the plastic ball the hold the lid in place plus the lid shut off switch. I watched the video that AppliancePartsPros.com has on how to replace the lid and the plastic balls. I removed the lid to get to the two philips head screws to remove that part of the shut-off switch. I took the new switch out of the package and compared it to the old switch. I assembled the switch just like the old switch look using the new...
Read more
More
$20.95
- Compare At:
-
$32.43
- You Save:
-
$11.48
Genuine Ge part
By: Ge
Part Number: WB24X10047
The Door Interlock Switch is an OEM part for GE microwaves. It ensures the safety of the microwave by preventing the appliance from operating while the door is open. This switch is part of a microwave's safety mechanism, which includes multiple interlock systems designed to stop the generation of microwaves immediately once the door is opened, thereby protecting users from exposure to microwave radiation.
Signs that it's time to replace your door interlock switch include the microwave not starting or stopping unexpectedly, the microwave continuing to operate with the door open, or a failure to heat food even though the appliance seems to be running.
Symptoms of a bad Door Interlock Switch include:
- Microwave does not start
- Microwave stops unexpectedly
- The microwave operates with the door open
- Microwave turns on but does not heat food
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
Do-It-Yourself Stories from Customers like You
When a power up of any kind was selected timer or clock ran down but turntable or cook mode never started when door was moved a little it would start to work then stop research suggested door switch James D. • Smyrna , TN • December 28, 2014
Removed and replaced 3 door switches and mounting bar that holds switches plastic gets brittle with age and each switch comes out slightly different from each other, the chances of breaking a mounting pin is very easy. care should be taken when snapping mounting bar back into place to insure top latch and bottom latch locate properly insure bar is proper aligned when tightening screws their is free play in mounting bracket that could affect door properly engaging switches. NOTE that their are...
Read more
More
$31.95
- Compare At:
-
$38.02
- You Save:
-
$6.07
Genuine Ge part
By: Ge
Part Number: WB28K10222
The Burner Cap Assembly is an OEM part for GE cooktops and ranges. It is designed to cover the burner head, ensuring even flame distribution for efficient and effective cooking. The cap also protects the burner head from spills and debris, which can interfere with burner performance and cause clogs.
You should replace the burner cap assembly if it becomes damaged or worn out. Causes of a bad burner cap assembly can include regular exposure to high heat, food residue buildup, or accidental impacts that cause cracks or warping. A compromised burner cap can lead to uneven flames and inefficient cooking.
Symptoms of a bad burner cap assembly include:
- Uneven or yellow flames
- Difficulty igniting the burner
- Visible cracks, chips, or warping in the burner cap
- Poor cooking performance with hotspots on cookware
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
My mom's burner caps were cracked Marlena H. • Chicago , IL • October 27, 2015
I ORDERED NEW CAPS AND PUT THEM ON.
Read more
More
$28.95
- Compare At:
-
$34.45
- You Save:
-
$5.50
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10245259
The Terminal Block is an OEM part for Whirlpool ranges. It serves as a crucial connection point for the range’s electrical wiring, ensuring a safe and reliable transfer of power to the appliance.
Over time, terminal blocks can deteriorate due to factors such as heat exposure, electrical surges, or wear and tear. When the terminal block becomes damaged or corroded, it can lead to poor electrical connections or potential safety hazards.
Symptoms of a bad terminal block include:
- Burnt or scorched connections
- Intermittent power loss to the range
- Difficulty in the range heating up properly
- Visible damage or corrosion on the terminal block
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Won't start
-
Element will not heat
-
Little to no heat when baking
See more...
Do-It-Yourself Stories from Customers like You
Oven would only heat up to 347° f in bake mode Chris M. • Scottsdale , AZ • October 25, 2021
I determined the hidden bake element below the oven cavity was not working, because the bottom of the oven was cold during normal use. If you have a built-in microwave + oven combination (mine is KitchenAid Model No. KEMS308SSS05), this is a difficult repair. The engineer who designed this oven should be invited to succeed elsewhere. It is impossible to access the bake element from the inside of the oven, so the How To video associated with this part will not help you. I had to remove the...
Read more
More
$26.95
- Compare At:
-
$32.07
- You Save:
-
$5.12
Genuine Wci part
By: Wci
Part Number: 316538904
The Light Bulb (40W) is an OEM part for Frigidaire appliances. Specifically designed to fit and function with Frigidaire models, this 40-watt bulb illuminates the interior of your oven, making it easier to check on the progress of your baking or roasting without opening the oven door.
Over time, oven light bulbs can burn out or be damaged from high temperatures or accidental bumps during cleaning or cooking. A functioning light bulb is crucial for the optimal operation of your oven, enhancing visibility and improving your cooking experience.
Symptoms of a bad Light Bulb include:
- The oven interior remains dark when the light switch is engaged.
- Flickering light, indicating a loose connection or nearing the end of the bulb's lifespan.
- Completely non-functional light, which can hinder your ability to monitor cooking progress.
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
The bottom heating element wasn't working in top oven Kevin Scott W. • Parker , CO • January 09, 2015
Before we replaced the board, my wife tried to replace just the element. We had one we had ordered several years ago when this same thing happened. When that didn't work we replaced the board and could see where the old board was damaged so we figured this was the solution. It would have been except the bottom element my wife used to replace the old element (which was fine but had been thrown out figuring the new one was new so why keep the old one) was 1" shorter in the back than the old...
Read more
More
$23.95
- Compare At:
-
$28.74
- You Save:
-
$4.79
Genuine Frigidaire part
By: Frigidaire
Part Number: 3051163
The Rear Drawer Glide is an OEM part for Frigidaire ovens and ranges. It is designed to provide smooth movement for the oven's rear drawer. The rear drawer glide allows the drawer to slide in and out with ease, providing convenient access to storage space or broiler pans. This is the glide that attaches to the rear of the oven drawer. For front glide that attaches to the body use 3051162. Two front and two rear are used for each stove. One for each corner.
Causes of a bad rear drawer glide can include normal wear and tear over time or accidental damage. When the glide becomes defective, it can lead to difficulties in smoothly opening or closing the drawer.
Symptoms of a bad rear drawer glide include:
- Difficulty in sliding the drawer in or out.
- Uneven movements or sticking of the drawer.
- Excessive noise or scraping sounds when operating the drawer.
- The drawer not staying securely closed or aligned.
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Stove top worked. No power to oven or broiler. Samuel C. • Monroe , GA • February 18, 2019
First off, shipping was ridiculously fast. Ordered at 3:30pm EST, shipped same day, and arrived at my house by 10:30am the following day. This was with standard shipping. Granted, the package only was delivered from one state away, but WOW, was not expecting that.
Replacement of the control board was much easier than I expected. I truly had it fixed in 15 minutes. The video was pretty much spot on. I user a single edged razor blade to carefully go around the edge of the overlay and remove it...
Read more
More
$7.95
- Compare At:
-
$12.43
- You Save:
-
$4.48
Genuine Ge part
By: Ge
Part Number: WB44T10018
The Bake Element is an OEM replacement part for GE ranges. It is a crucial component responsible for generating the intense heat necessary for baking and roasting in the oven cavity.
Causes of a bad bake element can include mechanical failure, electrical malfunctions, or simply reaching the end of its lifespan due to repeated heating and cooling cycles.
Symptoms of a bad bake element include:
- Oven not heating up properly or failing to reach the set temperature
- Uneven heating or hot spots within the oven cavity
- Visible damage or breaks in the element coil
- Unusual smells or burning odors emanating from the oven
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore oven models.
This part fixes the following symptoms
-
Little to no heat when baking
-
Element will not heat
See more...
Do-It-Yourself Stories from Customers like You
The self cleaning feature of my ge double oven hasn't worked in years and recently the upper oven baking element stopped working Robert A. • Enfield , CT • October 19, 2015
I wanted to get the upper oven baking element replaced; it hasn't been working for a few months. This double oven has had two other issues, there is a fan that comes on to cool the electronics panel, That fan has made excessive noise and it operates for 2-3 hours after the oven turns off. The other problem with the oven is the Self-Cleaning feature runs for about 15-30 minutes and then turns off with an error code. I've had a local appliance repair person in to address the error code and...
Read more
More
$93.95
- Compare At:
-
$112.74
- You Save:
-
$18.79
Genuine Ge part
By: Ge
Part Number: WB30T10133
The Element Radiant 9 Dual is an OEM part for GE cooktops and ranges. It provides the heating surface for cooking and is designed to offer two different heating zones, allowing for versatile temperature control depending on the size of the cookware.
Causes of a bad element radiant can include burnouts from excessive use, damage due to spills or impacts, and electrical issues. A faulty heating element can result in uneven cooking or the element failing to heat up at all.
Symptoms of a bad Element Radiant 9 Dual include:
- The element not heating or only partially heating
- Uneven heating across the surface
- Visible damage or discoloration on the element
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Dual burner did not work the warm light for burners was always on Mary S. • Portage , WI • May 30, 2015
Replace 9" dual burner.
Read more
More
$104.95
- Compare At:
-
$124.89
- You Save:
-
$19.94
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304506545
The Oven broil Igniter is an OEM part for Frigidaire ovens and ranges. This component is responsible for igniting the gas in the oven burner, allowing the oven to heat up. It works by drawing electrical current through the igniter filament until it becomes hot enough to ignite the gas, providing the flame necessary for cooking.
Common causes for an Oven Igniter to fail include a burnt-out filament, a break in the igniter's ceramic base, or a malfunction within the igniter's electrical system.
Symptoms of a bad Oven Igniter include:
- Oven not starting or heating up
- Gas smell when the oven is turned on
- Weak or no glow from the igniter element
- Unusual noises when attempting to ignite the gas
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Oven ignitor failure Andrew B. • Monticello , IL • April 01, 2014
Replaced ignitor. Very simple project.
Read more
More
$83.75
- Compare At:
-
$98.82
- You Save:
-
$15.07
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3148953
The Range Infinite Control Switch is an OEM part for Whirlpool ranges. This switch is used to control the heat levels of the surface burners, allowing for precise temperature adjustments. It works by regulating the electrical current that flows to the burner elements, enabling users to set the burners to their desired heat setting from low to high.
Symptoms of a failing Range Infinite Control Switch include:
- The burner not heating up or getting too hot regardless of the setting
- Inconsistent or fluctuating heat levels
- The control knob feeling loose or not turning smoothly
- The burner not turning on or off properly
- Electrical sparking or unusual noises from the control switch area
Causes of a bad infinite control switch can include wear and tear from regular use, internal electrical failures, damage from overheating, or mechanical issues within the switch mechanism.
This OEM Whirlpool part is also compatible with some models from Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore.
Do-It-Yourself Stories from Customers like You
Couldn't control the heat on the big burner it intermittently got red hot (and stayed there) Fred S. • Emerald Isle , NC • March 26, 2016
I first diagnosed the problem by replacing the burner control (Infinite switch) with one from a smaller burner (one that I knew worked fine). That seemed to solve the problem. I ordered the correct control for the big burner on Saturday night, it arrived Tuesday and installed it in less than 10 minutes using only a Phillips screwdriver.
Remember to unplug the stove before performing any service. Take this time to clean around and under the stove. (You know it needs it!)
Read more
More
$53.95
- Compare At:
-
$64.74
- You Save:
-
$10.79
Genuine Ge part
By: Ge
Part Number: WB30T10155
The Triple Haliant Element is an OEM part for GE cooktops and ranges, designed to provide versatile and powerful heating options. This element features a triple-ring design that allows for three different sizes of cookware to be heated efficiently on the same burner. It's ideal for situations requiring precise temperature control and flexibility, such as when cooking with large pots or pans that need even heat distribution.
Causes for a Triple Haliant Element to fail can include prolonged use leading to wear and tear, overheating that damages the internal components, or electrical issues such as short circuits.
Symptoms of a bad Triple Haliant Element include:
- The element does not heat up
- Only parts of the element heat up
- Unusual fluctuations in heat levels
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
Do-It-Yourself Stories from Customers like You
Inner most burner not working on GE triple haliant burner. Ben M. • Chattanooga , TN • October 05, 2023
Did research to determine what might cause problem. Determined that it was either the infinity switch or the triple haliant burner. Watched several YouTube videos on testing the infinity switch, but none exactly replicated this switch. Chatted with AppliancePartsPros.com on a Saturday on how to test, but later determined I needed more information, so I posted a question on the APP page for the triple burner. Received a quick response from APP which isolated the problem as the burner, not the...
Read more
More
$175.95
- Compare At:
-
$207.62
- You Save:
-
$31.67
Genuine Ge part
By: Ge
Part Number: WB29K10023
The Burner Cap Assembly is an OEM part for GE gas ranges and cooktops. It sits atop the gas burner to help distribute the flame evenly for better cooking performance. This cap is crucial for achieving precise temperature control and consistent heating, ensuring that food cooks evenly across the cookware.
Symptoms of a bad Burner Cap Assembly include:
- Uneven flame distribution, leading to uneven cooking or heating.
- Difficulty igniting the burner, or the flame going out unexpectedly.
- Visible signs of wear, such as warping, discoloration, or chipping of the burner cap.
Causes of a bad burner cap can include accumulation of food particles or cleaning products that clog the ports, physical damage from impact or dropping, or general deterioration from regular exposure to high temperatures.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Largest burner taking too long to light up on my ge model jgp933sek1ss Gary D. • Louisville , KY • February 23, 2015
Replacing head burner d solved the problem. The 8 year old original developed a mild warp, replacing it was the solution. GE gas cook top Model JGP933SEK1SS. I replaced the other burner caps for a cosmetic renewal.
Read more
More
$19.51
- Compare At:
-
$23.41
- You Save:
-
$3.90