Need Help?
Call or text
Control panel overlay for range hoods. Replaces worn, faded, or peeling labels on the control interface. Restores clear function markings for buttons.
Replaced the digital control and sticker on the front Read more
Captures grease and smoke from cooking emissions in your range hood. Replace when clogged or visibly dirty to maintain ventilation. Verify fit with model.
Ordered new one after reading Q&A. Read more
Protects range hood bulbs from grease and smoke buildup. Replace if cracked, melted, or discolored to restore proper lighting. Confirm fit by model number.
I ordered a new light cover and snapped it into place. Read more
Replace your range hood grease filter to trap cooking grease, smoke, and odors effectively. Install when filter appears clogged or discolored. Verify fit.
Replaced the old ones with these new ones. Read more
Decorative overlay label for range hood control panel. Fits over touch pad to provide clear button labels. Replace if cracked, faded, or peeling.
Pretty easy job for a DIYer. The control panel gets loose when the plastic tabs break for one reason or the other. You can replace the control board housing without having to replace the control board. Note also that the control board housing comes with a new control overlay label, so you don't need to buy the label like I did. You will need torx screw drivers or torx bit set - two sizes T20 and maybe T15. Start by remove the three metal filters (I replaced mine during this repair as they... Read more
Captures cooking grease and smoke particles to maintain clean air. Replace when clogged or damaged. Measure your existing filter to confirm fit.
We ordered new filters from AppliancePartsPro.com one afternoon. The next afternoon we were very surprised to receive the order! We removed the old filters, installed the new filters, and we are now using our ventilation. Read more
Control knob for range hood fan speed and light settings. Replaces broken, cracked, or missing knobs. Installs on control panel with half-circle mount.
Replaced it with the ordered part. Read more
The Vent Control Button is an OEM component specifically designed for select Bosch downdraft ventilation ranges. Pressable from the countertop, its reliable switch operates the vent position. Precise guidance aligns ductwork airflows.
Symptoms of a faulty control button may include intermittent or unresponsive vent movement. Over-activation degrades contacts requiring change.
Causes of a bad button relate to typical contact wear reducing conductivity. Splashes introduce moisture necessitating replacement over time.
Causes of a bad vent control button involve:
This OEM Bosch part is also compatible with some Thermador, Dacor, and Viking downdraft ventilation ranges. Replace to maintain convenient vent management directing smoke and odors safely outdoors.
Found replacing the switch to be doable, but it was quite a delicate operation. This was for a Thermador range with a broken downdraft switch. It required the removal of 5 small screws which could easily be fumbled and dropped down where it would be difficult, if not impossible to retrieve. Two of the screws were facing the back, so it was a blind operation to remove and replace the screws. Required an offset screwdriver, as space was tight. So, be EXTREMELY careful to not drop the screws and... Read more
Light housing mounts and protects bulb wiring in your range hood. Replace when corroded or damaged to restore secure bulb connections and reliable lighting. Confirm fit by model.
Replaced corroded light housings, where bulb connections to housing felt "scratchy" when plugging in--suspect corrosion. I was hoping that the new housings would simply plug in (wired connections would disconnect easily). However, I found that the originals were soldered and heat-shrunk in. I had to trace and cut the original connection, butt-connect in (can't solder in the air, above my head...), heat-shrink and then tape my connections. However, the lights are working much better... Read more
Hood motor stopped working or won't turn on? This motor with capacitor assembly restores ventilation power to remove smoke and odors from your cooking area.
Purchased a new one works good so far Read more
Replace your range hood's halogen bulb when it burns out or dims. Restores bright, focused stovetop lighting. Verify fit with your model number.
Replace it Read more
Secures the fan blade to the motor shaft, preventing vibration and noise. Replace if blade is loose or clip is missing to restore proper airflow.
Removed the brackets that sheltered the fan blade, removed the fan clip (was a little difficult but a needle nose plier was helpful), removed broken fan blade collar. Attached new fan blade and clip. Getting the new fan blade seated on the stem was difficult. I used a socket (so that the stem had room to move down onto the fan) and a rubber mallet on the socket to achieve a complete seating. Reattached brackets. Also ordered a charcoal filter to replace the standard filter. The charcoal... Read more
Captures grease, smoke, and airborne particles from cooking. Replace when visibly dirty or clogged to maintain air quality and prevent buildup. Verify fit with your model number.
Replace the filter with a new one. Read more
Replace a cracked, broken, or missing control knob on your range hood. This knob installs on the control panel to operate fan speed and settings.
Ordered a new knob and bezel. Both worked perfectly and the hood looks good as new. Read more
Recirculation filters for non-ducted range hoods capture grease and odors from cooking. Replace when airflow weakens. Verify fit with your model number.
This was a none vented new install. Unit came with regular filter for a vented system, so had to order charcoal filter. Read more
Replace your range hood's halogen lamp assembly when bulbs burn out or the socket becomes damaged. Complete assembly includes housing and bulb socket.
The cover itself could not be purchased separately, so I bought the whole assembly. It was an easy fix (unplug old, plug in new) so I replaced the whole thing reven though I ony needed the cover. Read more