Range Hood Parts

This control knob replaces a worn, broken, or missing range/cooktop control dial to restore a secure grip and reliable setting selection. It gives you a simple parts-level fix so burners and oven controls respond properly. What it does:

• Replaces damaged or missing control knob so you can turn and set burner or oven controls again
• Provides secure engagement with the control shaft to prevent slipping or spinning
• Helps restore precise selection of temperature or cook settings when the original knob is cracked, loose, or missing
• Matches OEM fit and function for direct swap-on installation with the original control shaft

• Always turn controls OFF and ensure the appliance is cool before removing or installing the knob
• Pull the old knob straight off the control shaft (use a cloth or knob puller if it's tight); align the marker and push the new knob fully onto the shaft
• If the new knob does not seat correctly or control operation still fails, the underlying switch or valve may need replacement.

This pre-wired capacitor replaces the factory capacitor used to help start and stabilize appliance motors and controls. The attached lead wires make hookup straightforward for compatible appliance connections. What it does

• Provides the necessary capacitance to help motors start and run smoothly
• Helps stabilize electrical signals to reduce motor stalling or inconsistent operation
• Addresses humming, failure-to-start, or intermittent motor performance when the capacitor is faulty
• Used wherever a compact, pre-wired run/start capacitor is required by the appliance

• Disconnect power to the appliance before servicing to avoid shock or injury
• Capacitors can hold a charge; discharge safely
• Verify terminal style, polarity (if applicable), and electrical rating match the original part before installation

Lamp holder that secures the interior light bulb and provides the electrical connection for reliable refrigerator illumination. Replacing a worn socket restores steady contact and helps fix no-light, flickering, or intermittent interior lighting. What it does:

• Secures and aligns the interior light bulb while providing the electrical contact to the appliance lighting circuit.
• Replaces corroded or damaged sockets that can cause no light, dim or flickering bulbs, or bulbs that won't stay seated.
• Fits behind the interior light cover and connects to the existing wiring in the lighting assembly.
• Serves as a direct single-piece replacement when the socket shows visible damage, burn marks, or loose contacts.

• Disconnect power at the wall outlet or breaker before you begin to avoid electrical shock.
• Allow the bulb to cool and remove it before replacing the socket; handle wiring and terminals carefully.
• Make sure connections are secure and insulated; if wiring is frayed or damaged, replace wiring.

This retaining nut is a small threaded fastener that secures appliance components in place, restoring stable mounting and preventing vibration or movement. It's a simple replacement for worn or missing nuts on compatible GE appliances. What it does:

• Secures elements, brackets or terminals to prevent loosening during use
• Stops rattling or movement caused by a missing or stripped nut
• Helps maintain proper alignment for heating and electrical connections
• Commonly used where a compact, threaded retaining nut is required

• One retaining nut

• Inspect mating threads and surrounding hardware; replace damaged studs or bolts as needed
• Hand-start the nut to avoid cross-threading, then tighten with the appropriate tool
• Disconnect power to the appliance before working near electrical components

This motor bracket secures the appliance motor to the cabinet, keeping the motor aligned and stable for reliable operation. It's a direct-fit replacement that restores proper motor support and reduces noise from misalignment. What it does:

• Supports and positions the motor so the shaft and pulleys line up correctly
• Prevents excess motor movement that can cause vibration or rubbing noises
• Helps maintain proper belt/pulley tension for effective power transfer
• Restores secure motor mounting after damage or corrosion

• Follow the appliance service manual for removal and reassembly; secure all mounting hardware to the specified torque.
• Disconnect power before starting work to avoid electrical shock.
• Inspect surrounding mounting holes and fasteners; replace any damaged screws or hardware.
• Check belts, pulleys, and motor mounts for related damage.

This replacement chimney is the exterior cover that hides the hood's ductwork and mounting hardware, restoring the finished look of your kitchen range hood and protecting internal components from grease and dust. Fits the upper section of select chimney-style hoods. What it does:

• Covers and protects ductwork and mounting brackets for a clean, finished appearance
• Helps prevent grease and dust from settling on internal hood components
• Replaces damaged, dented, or missing chimney pieces that affect appearance or fit
• Restores proper alignment of the hood's upper housing for secure installation

• One chimney upper cover

• High-level replacement — basic hand tools typically required; lift and support the chimney during installation
• Consider a second person for safe handling and alignment of the cover
• Turn off power to the hood before removing or working near electrical components

The Range Hood Cover is an OEM replacement part for GE range hoods. It serves as a protective barrier for internal components, shielding them from grease, smoke, and debris while also contributing to the overall aesthetic of the range hood. This cover is essential for maintaining the efficiency and cleanliness of the appliance.

Over time, range hood covers can become damaged or discolored due to exposure to heat, grease, and cleaning agents. A compromised cover may fail to protect internal parts effectively, potentially reducing the performance of the range hood.

Symptoms of a bad range hood cover include:

• Visible cracks, warping, or discoloration
• Difficulty securing the cover to the range hood
• Increased grease or debris buildup on internal components
• A diminished appearance of the range hood

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This switch box is the outer housing that protects and organizes oven/stove control switches and wiring, helping keep electrical components secure and stable for reliable cooktop operation. What it does:

• Holds and shields control switches and related wiring from spills, heat, and movement
• Provides secure mounting points for switch terminals to prevent loose connections
• Helps prevent shorting, arcing, and exposure of live wiring
• Restores proper alignment of controls when cracked, melted, or broken

• Disconnect power at the breaker before starting any repair to avoid shock or injury
• Inspect and label wiring before removal; reattach wires to the same terminals
• Handle sharp edges and retainers carefully; some models use clips or screws for attachment
• If switches or wiring are damaged, replace those parts as well for a complete, safe repair

This electronic power board supplies and regulates voltage to the appliance's control system, helping restore reliable startup and control functions. Replace a damaged board to address intermittent power, no display, or failure to start. What it does

• Regulates and distributes power to the appliance's control modules and user interface.
• Helps restore normal startup when the unit won't power on or shows a blank display.
• Can stop erratic cycling or intermittent operation caused by failed power regulation.
• Works with the control electronics to enable responsive button/display behavior.

• One electronic power board (control PCB)

• Disconnect power at the breaker or unplug the appliance before servicing.
• Handle the board by the edges and avoid static discharge; use antistatic precautions if available.
• Verify harness connections match and seating is secure before reassembly.

This chimney vent cover is the exterior metal shroud that finishes the range hood's vertical duct area and helps direct exhaust up into the ductwork. It restores the hood's finished appearance and ventilation pathway. What it does

• Covers and protects the hood's vertical duct section while maintaining a neat, finished look
• Guides exhaust upward into the house ductwork for proper ventilation
• Prevents exposure of internal components and duct seams
• Commonly replaced when dented, scratched, or missing

• One chimney vent cover

• Designed for bolt/screw attachment to the hood body or duct bracket; verify fastener locations before installing
• Turn power to the hood off at the breaker before any service that requires access behind panels
• Handle with care to avoid scratching the finished surface during installation
• If ducting or mounting hardware is damaged, replace those items separately; this part is the exterior cover only