Range Hood Parts

This lamp ballast is the replacement lighting module that powers and stabilizes the oven/microwave/upper-cabinet light for consistent illumination. Replacing a failed ballast restores a flickering or non-working interior light for safe, visible cooking. What it does:

• Regulates power to the appliance light so the bulb or LED stays on steadily
• Commonly fixes symptoms like a light that flickers, stays dark, or works intermittently
• Works with the appliance's existing lamp socket and wiring harness
• Provides a direct replacement for the original ballast used in compatible units

• One lamp ballast

• Disconnect power to the appliance before starting — turn off breaker or unplug
• Handle gently and avoid bending terminals or damaging the wiring harness
• Reassemble panels and secure mounting fasteners before restoring power

This hood damper is the backdraft flap in the exhaust outlet. It opens when the blower runs to vent air outside and closes when off to help block outside drafts, odors, and pests from entering.

• Controls airflow from the blower to the duct during ventilation
• Closes when off to reduce backdrafts and outside air intrusion
• Helps maintain effective capture of smoke, steam, and odors
• Typical symptoms: drafts through the vent, flapping/rattling noises, poor venting, or a broken/missing flap

• Disconnect power; if vented, support or disconnect ducting as needed
• Access the exhaust outlet and remove the damaged damper
• Install with arrow/hinge oriented for airflow; the flap moves freely without binding
• Reassemble ductwork, restore power, and test the fan on all speeds

A replacement mounting plate that secures internal components and restores proper alignment in compatible Whirlpool appliances. Helps stop rattling and loose parts so the appliance runs more quietly and reliably. What it does:

• Secures and supports internal assemblies to maintain correct positioning
• Prevents vibration and rattling caused by a damaged or bent plate
• Helps maintain proper clearance so moving parts operate without interference
• Restores stable fit when the original plate is cracked, warped, or corroded

• Disconnect power (unplug or shut off breaker) before starting any repair
• Remove the appropriate access panel or trim to reach the plate; keep track of fasteners
• Use basic hand tools; avoid over-tightening screws to prevent distortion

This capillary clip secures the oven thermostat's sensing bulb/capillary to the cavity wall so it stays correctly positioned for accurate temperature control. Replace a missing or damaged clip to prevent a sagging bulb and erratic oven performance.

• Holds the thermostat capillary tube/sensing bulb in place inside the oven
• Helps maintain consistent temperature regulation by keeping the bulb properly located
• Direct replacement for a broken, corroded, or missing clip
• Symptoms include a loose or dangling bulb, uneven baking, or temperature swings

• Disconnect power (and gas, if applicable) and allow the oven to cool completely
• Access the oven cavity; locate the thermostat sensing bulb and capillary along the wall or back panel
• Position the bulb/capillary and secure with the new clip; avoid kinking or crushing the tube
• Restore power, and test operation

Solid-state triac that switches AC power under command of the appliance's electronic control board. Replacing a failed triac restores proper power control to heating elements or motors and resolves intermittent or no-power symptoms. What it does:

• Acts as a solid-state switch on the control board to regulate AC power to heating elements or motors
• Enables the electronic control to modulate output for temperature or speed control
• Failure can cause no heat, intermittent heating, or loss of motor control
• Designed to match the original control circuit; check board mounting and connections before replacing

• Always disconnect all power at the breaker or unplug the appliance before servicing — risk of electric shock
• This part mounts to the control board; handle the board and connectors carefully to avoid damage
• Use anti-static precautions when handling electronic components;
• Verify the part number on the original board before installation

This lamp socket holds the appliance light bulb and provides the electrical connection it needs, restoring reliable, steady lighting so you can see clearly during cooking and routine checks.

• Provides secure electrical contact to power the light bulb
• Holds the bulb firmly in the light assembly
• Replaces heat-damaged or brittle sockets that cause flickering or no light
• Common symptoms: light won't turn on with a known-good bulb, flickers, bulb won't seat, or visible charring/melting at the socket

• Disconnect power at the breaker and allow the appliance to cool before service
• Wear cut-resistant gloves; nearby metal and glass edges can be sharp
• Move wires one at a time from the old socket to the new to maintain correct connections
• Install a bulb that matches your model's specified type and wattage before restoring power

This lampholder is the light socket that secures the bulb and delivers power so your appliance lighting works reliably. Replace a worn or heat-damaged socket to restore steady illumination and dependable operation.

• Provides secure mounting and proper electrical contact for the light bulb
• Fixes issues such as no light, flickering, or bulbs that won't stay seated even after replacement
• Replaces sockets with visible cracks, discoloration, or burned contacts
• Uses the bulb type and wattage specified for your model

• Disconnect power at the breaker or unplug the appliance before servicing
• Use only the bulb type and wattage listed for your appliance; seat the bulb fully without overtightening
• Transfer any mounting screws, bracket, or connectors from the original part as required by your model

This Filter is an OEM part for Bosch Range Hoods. It plays a role in maintaining clean and purified air in your kitchen by trapping grease, smoke, and odors during cooking.

What Causes a Bad Filter:
Over time, the filter accumulates grease, dirt, and particles from cooking, causing it to clog and reduce its effectiveness. Additionally, if the filter is not cleaned or replaced regularly, it can become damaged or deteriorate.

Symptoms of a Bad Filter:

• Reduced airflow in the kitchen
• Lingering cooking odors
• Poor grease and smoke absorption

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This repair kit filter replaces a worn or damaged dishwasher filter to help restore normal drainage and prevent debris from recirculating. Use it to maintain wash performance and reduce odors caused by trapped food particles. What it does:

• Traps food and debris to protect the pump and spray arms
• Helps prevent clogs and poor drainage that can cause standing water
• Reduces buildup that leads to unpleasant smells or reduced cleaning results
• Restores proper filtration when the original filter is cracked, torn, or missing

• Turn off and unplug the appliance or disconnect power at the breaker before servicing
• Remove the old filter assembly per the manufacturer instructions; inspect seating area for debris
• Handle small parts carefully and ensure proper alignment to avoid leaks or poor sealing

This replacement lamp restores clear illumination so you can see the appliance interior and monitor items at a glance. Swap a failed bulb to bring back dependable lighting for everyday use. What it does:

• Provides illumination when the appliance calls for light (door opens or light button/switch engaged)
• Replaces a burned-out, broken, or dim bulb to restore visibility
• Helps you see contents and monitor cooking progress
• Common symptoms: no light, flickering, or intermittent operation

• One replacement lamp

• Disconnect power and allow the lamp area to cool before servicing
• Access the bulb per your user manual; remove any lens or cover carefully
• Handle glass with gloves or a clean cloth to avoid skin oils on the bulb
• Match the bulb type/wattage specified on the appliance rating label; do not exceed

This thermal cutoff fuse interrupts power if internal temperatures exceed safe limits, protecting motors and heating elements. Replacing a failed fuse can restore normal power to the appliance when overheating has caused shutdowns or no-start conditions. What it does:

• Acts as a temperature-sensitive safety device that opens the circuit when excessive heat is detected
• Prevents continued operation of overheating components to reduce fire and damage risk
• Common symptom of failure: appliance or fan won't start or runs intermittently
• Used where overheating protection is required for motors, blowers, or heating elements

• Always disconnect power to the appliance before accessing or replacing the fuse
• Verify the OEM part number and orientation before installing; replace only with the same type
• Do not bypass or defeat the fuse

Size: 10-24 x 3/8 inch.

Replacement wire harness that routes power and control signals between switches, lights and the motor on select ventilation units. Restores reliable electrical connections to help resolve intermittent operation, no-light, or no-fan symptoms. What it does

• Routes electrical power and control signals between controls, lights and the fan motor — use when a unit has intermittent or no power to components.
• Replaces frayed, damaged, or broken wiring that can cause open circuits, blown fuses, or erratic operation.
• Restores secure plug-and-socket connections when terminals are loose, corroded, or worn.
• Helps eliminate symptoms such as lights that won't turn on, fans that don't run, or components that work intermittently.

• Always disconnect power at the breaker before inspecting or replacing the harness.
• Match connector shapes and pin orientation; do not force connectors together.
• Route and secure the harness along the original path, avoiding sharp edges and pinch points.
• After installation, restore power and test all functions; if there are signs of burning, overheating, or repeated failure, stop.

This replacement fan blade restores airflow in hood and ventilation blowers by moving air through the fan assembly. Use it to replace cracked, bent, or worn blades and help reduce vibration and noisy operation. What it does:

• Spins on the blower motor to generate airflow for ventilation and exhaust.
• Replaces blades that are cracked, bent, or visibly damaged and causing reduced airflow.
• Can reduce unusual noise and vibration caused by an imbalanced or broken blade.
• Helps restore proper vent performance when airflow is weak or inconsistent.

• Disconnect power to the appliance before starting any service.
• Remove the blower housing or access panel to reach the blade; follow OEM instructions.
• Keep fasteners and spacers in order during disassembly; reassemble with original hardware unless replacements are specified.
• If vibration or noise persists after replacing the blade, inspect motor bearings, mountings, and blower housing for damage.

Replacement service light switch that restores the on/off control for a Broan ventilation or range-hood light. Use this switch to replace a worn, stuck, or non-functioning light control so the light operates reliably. What it does:

• Replaces the unit's user-control for the light circuit, restoring normal on/off operation.
• Fixes common symptoms such as the light not turning on, intermittent lighting, or a switch that feels loose, stuck, or unresponsive.
• Matches the original switch location and wiring style to simplify replacement and restore functionality.

• Always disconnect power to the appliance at the breaker before starting work.
• Removal typically requires taking off the light cover or access panel to reach the switch; keep screws and small parts for reassembly.
• Match wire colors/terminals when reconnecting; use proper connectors and secure wiring.

This is a filter latch that secures the refrigerator water/air filter housing so the filter stays seated and the housing seals correctly. Replaces a worn or broken latch to restore proper filter retention. What it does:

• Holds the filter housing cover or cartridge firmly in place to prevent dislodging
• Helps maintain a proper seal to reduce leaks or bypass around the filter
• Stops the filter from falling out when removing or replacing the cartridge
• Resolves symptoms like a loose or broken latch, filter not staying seated, or water bypass near the filter area

• Disconnect power and shut off water supply before servicing the filter area
• Remove the old latch per your model's service instructions; small hand tools may be needed
• Inspect surrounding housing for damage; replace housing if cracked or warped
• Do not force or overtighten; seat the latch so the filter seals correctly