Refrigerator Ice Maker & Related

This replacement ice cube pan holds and organizes ice in your refrigerator's freezer. Replacing a cracked or warped pan restores clean, contained ice storage and smoother access or dispensing, depending on your model's design. What it does:

• Collects and stores ice produced by the icemaker or manual trays
• Keeps cubes contained and easy to access; fits designated guides in the freezer
• Helps ensure proper ice access or dispensing on applicable models
• Typical symptoms: cracked bin, broken tabs, bin won't seat, ice spilling or clumping

• 1 ice cube pan/bin

• Disconnect power to the refrigerator and turn off the icemaker before starting
• Remove the old pan and empty any remaining ice
• If your model reuses a drive/crusher or other hardware, transfer those parts from the original pan as directed for your unit
• Seat the new pan fully in its tracks/coupler, restore power, and allow normal ice production

This automatic refrigerator ice maker assembly molds water into cubes and ejects them into the bin, restoring steady ice production. Replace a failed icemaker that no longer cycles, fills with water, or ejects cubes reliably.

• Freezes water in its mold and harvests finished cubes into the ice bin
• Controls the fill, freeze, and harvest sequence for automatic ice making
• Works with the refrigerator's controls to start/stop ice production as designed
• Common symptoms: no ice or low ice volume; won't fill; cubes won't eject; unit stalled mid-cycle

• Disconnect power and shut off the water supply before servicing
• Remove the ice bin; loosen mounting screws; unplug the wire harness; lift out the old assembly
• Transfer any brackets, covers, or fill cup from the original unit if required
• Align with the fill tube; secure screws; reconnect harness; restore power and water; allow up to 24 hours for full ice production

The Ice Container is an OEM part for Whirlpool refrigerators. It is responsible for holding and dispensing ice from the icemaker into the dispenser chute.

The ice container ensures the proper storage and convenient access to ice whenever you need it. It is designed to provide a reliable ice storage solution.

A bad ice container assembly can occur due to wear and tear over time or damage to the container or its components. If you notice symptoms such as the ice not dispensing properly, leaks from the dispenser area, or a broken or cracked ice container, it may be time to replace this part.

Symptoms of a bad ice container include:

• Improper dispensing of ice
• Leaks from the dispenser area
• Broken or cracked ice container

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This cup fill spout directs the dispenser's water stream cleanly into a cup. If the spout is cracked, clogged, or warped, it can cause splashing or persistent drips—replacing it restores a steady, controlled flow.

• Funnels water from the dispenser outlet for a smooth, targeted stream
• Helps reduce splashing and water running down the door
• Can resolve drips after dispensing, erratic spray, or a damaged/missing spout
• Visible cracks, mineral buildup, or deformation are common failure signs

• Unplug the appliance and turn off the water supply
• Open the dispenser area and release the spout from its locking tabs or clips
• Seat the new spout fully; transfer any seals from the old part if applicable
• Restore water and power, then test for proper flow and leaks

The Ice Container is an OEM replacement part for Whirlpool refrigerators. It is responsible for storing and dispensing ice from the refrigerator's ice maker.

A bad ice bucket assembly can occur due to wear and tear, cracks, or damage to its components. If you notice symptoms such as a broken or damaged assembly, difficulty in dispensing ice, or leaks from the ice maker, it may be time to replace the ice bucket assembly.

Symptoms of a bad ice bucket assembly include:

• Broken or damaged assembly
• Difficulty in dispensing ice
• Leaks from the ice maker

Restore your refrigerator's ice maker by replacing the faulty or damaged ice bucket assembly with this genuine OEM part.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

This replacement plastic ice scoop makes it easy and sanitary to transfer ice from the bin to glasses or trays. Durable, lightweight design restores convenient ice handling after the original scoop is lost or worn. What it does:

• Provides a hygienic way to scoop and serve ice without using hands
• Fits standard refrigerator ice bins and buckets for easy access
• Helps prevent spills and keeps ice contained while serving
• Replaces missing, cracked, or discolored scoops to restore everyday use

• No tools required — simply place scoop in the ice bin or store in a convenient location
• Wash before first use and after each use with warm, soapy water
• Keep away from high heat to avoid warping or damage
• Not an electrical component; disconnecting power is not required for replacement

The Ice Scoop is an OEM part for Whirlpool refrigerators. This accessory is designed to make scooping ice from your refrigerator's ice bin easier. It features a comfortable handle and a well-designed scoop, allowing you to easily serve ice for your beverages or other cooling needs.

A bad ice scoop can occur due to wear and tear, damage, or loss. If you find yourself struggling to scoop ice or if your current ice scoop is damaged or missing, it's time to replace it with this genuine OEM part.

Symptoms of a bad ice scoop include:

• Difficulty in scooping ice
• Broken or cracked scoop
• Missing or lost ice scoop

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

This assembly stores ice and delivers it from the ice maker to the dispenser. Replace it when the bin is cracked, warped, or its drive components are damaged, causing weak dispensing, jams, or being stuck on one ice type.

• Stores ice and interfaces with the dispenser system to deliver cubes or crushed ice
• Resolves no or weak ice dispensing
• Corrects grinding/clicking noises or auger jamming from a damaged bin
• Addresses visible cracks, broken tabs, or a bucket that won't seat securely

• Disconnect power to the refrigerator before servicing
• Open the door and pull the old bucket straight out; depress any release tab if equipped
• Align and seat the new assembly fully so the drive coupling engages—do not force it
• Restore power and test the dispenser (cube and crush selections)

The Icemaker is an OEM part for Whirlpool refrigerators. This component is responsible for producing ice by automatically filling with water, freezing it, and then ejecting the ice cubes into the storage bin. Please note that for installation, you will need to reuse the original cover and bracket from your existing icemaker. Makes 5 cubes at a time.

Causes of a bad icemaker can include mechanical failures, clogged water lines, or electrical issues. Over time, wear and tear from constant use or exposure to hard water and impurities can also affect its performance.

Symptoms of a bad icemaker include:

• The icemaker not producing ice
• Ice cubes being smaller than usual or misshapen
• Leaking water inside the freezer
• Unusual noises during the ice-making process
• The ice bin not filling up

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Ice Maker Assembly Kit is an OEM replacement part for LG refrigerators. This kit includes the ice maker assembly and installation mounting hardware. For the ice maker to function correctly, it is important to set the temperature of the freezer within the range of 0 to 5 degrees Fahrenheit (-18 to -15 degrees Celsius).

Over time, the ice maker can wear out or malfunction due to continuous use, mineral buildup from hard water, or electrical issues. These problems can hinder its ability to produce and dispense ice efficiently.

Symptoms of a bad ice maker assembly include:

• Ice maker not producing ice
• Ice cubes jamming or backing up inside the maker
• Leaks or wetness under the refrigerator
• Ice dispenser not functioning properly

This OEM LG replacement is also compatible with Sears/Kenmore refrigerators.

The Refrigerator Icemaker Assembly is an essential component for maintaining a reliable ice supply in your Samsung refrigerator. Designed specifically for Samsung models, this genuine OEM part ensures a perfect fit and seamless integration with your existing appliance. The assembly is crafted with high-quality materials to provide durable and consistent ice production, helping you enjoy fresh ice whenever you need it. Easy to install, the Refrigerator Icemaker Assembly allows you to quickly restore your fridgeGÇÖs ice-making functionality without the hassle of complex repairs. By choosing this genuine OEM part, you can trust in the performance and longevity that matches the original design of your refrigerator. Whether youGÇÖre replacing a faulty icemaker or upgrading your current setup, this assembly offers a straightforward solution to keep your kitchen running smoothly. Enhance your refrigeratorGÇÖs efficiency and ensure a steady ice supply with the reliable Refrigerator Icemaker Assembly .

The Icemaker is an OEM part for Whirlpool refrigerators. This part produces ice, automatically filling the ice mold with water and freezing it to create ice cubes, which are then dispensed into the ice storage bin.

Common causes of a bad icemaker include wear and tear over time, mineral buildup from hard water, electrical failures, or mechanical issues within the ice-making components.

Symptoms of a bad Icemaker include:

• The icemaker not producing ice
• The icemaker producing ice cubes that are smaller or irregular in shape
• Ice cubes stuck together or not being ejected from the mold
• Unusual noises coming from the icemaker

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Note: The icemaker does not include the harness or the shut off arm.

This replacement ice maker cover snaps over the icemaker assembly to shield moving parts and keep frost and debris out. Replacing a cracked or missing cover helps restore reliable ice production and a clean, finished look inside the freezer.

• Protects the ice maker's internal components from accidental contact and debris
• Helps reduce frost buildup around the ejector and motor area
• Maintains proper fit and clearance for smooth ice harvesting
• Common symptoms: cover cracked, broken tabs, loose or missing cover, excess frost around the icemaker

• Disconnect power to the refrigerator and turn off the water supply
• Remove the ice bin to access the ice maker
• Release any retaining tabs or screws and remove the old cover
• Install the new cover, ensuring the ejector and shutoff arm move freely; restore power and water

This ice maker lever is the mechanical arm that controls ice production by interacting with the ice maker's on/off and level-sensing mechanism. Replacing a broken or missing lever restores proper operation and helps prevent overfilling or no-ice conditions.

• Acts as the ice maker's shut-off arm to regulate ice production
• Lowers to allow ice making; raises to stop when the bin is full
• Common symptoms: ice maker won't stop making ice, no ice when arm is stuck up, broken/missing lever, lever won't stay in position
• Helps ensure consistent, reliable ice production control

• Disconnect power and shut off water before service
• Remove the ice bin to access the ice maker; gently release the lever from its pivots/linkage
• Note lever orientation; transfer and reuse any original springs, clips, or fasteners
• Reinstall components, restore power, and verify free up/down movement of the arm

This ice container deflector attaches to the ice bucket assembly and guides cubes toward the dispenser chute. Replacing a cracked or missing deflector restores proper ice flow and helps keep ice from spilling inside the freezer during dispensing.

• Directs ice from the bucket into the dispenser chute/crusher path
• Helps maintain consistent dispensing and minimizes stray ice inside the freezer
• Replace if cracked, warped, or missing
• Symptoms include erratic dispensing, ice spilling or jamming, or a visibly damaged/missing guide on the ice bin

• Disconnect power before servicing; remove the ice bucket
• Position the new deflector in the original location; reuse existing screws/clips if applicable
• Ensure the curved face points toward the dispenser chute
• Reinstall the ice bucket, restore power, and test ice dispense