Refrigerator Parts

The Defrost Thermostat is an OEM replacement part for Frigidaire refrigerators. This component plays a crucial role in the defrost system, monitoring and regulating the temperature to ensure proper defrosting of the evaporator coils.

Causes of a faulty defrost thermostat can include normal wear and tear over time, exposure to excessive temperature fluctuations or moisture, or electrical malfunctions.

Symptoms of needing to replace the defrost thermostat include:

• Improper defrosting or lack of defrosting
• Frost buildup on the evaporator coils
• The refrigerator running constantly or cycling frequently

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore refrigerator models.

The Fan Motor Grommet is an OEM replacement part for GE refrigerators. This small but essential component serves as a seal and insulator around the area where the fan motor shaft protrudes from the appliance body.

Causes of needing to replace the fan motor grommet can include normal wear and tear over time, exposure to extreme temperatures or moisture, or physical damage due to impact or improper installation.

Symptoms of a faulty or missing grommet include:

• Air leaks or drafts around the fan motor area
• Condensation buildup or frost formation near the motor shaft
• Increased noise or vibration from the fan motor assembly
• Reduced cooling efficiency due to air leakage

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerator models.

The Pantry Drawer Door Cover is an OEM part for Whirlpool refrigerators. It serves as the front cover for the refrigerator's pantry drawer, helping to maintain consistent temperature and humidity levels within the compartment. This part is crucial for preserving the freshness and longevity of fruits, vegetables, and other perishables.

Symptoms of a bad Pantry Drawer Door Cover include:

• Difficulty maintaining consistent humidity levels in the drawer
• Visible cracks or damage to the cover
• Problems with the drawer not closing properly

Causes of a bad pantry drawer door cover can stem from mechanical stress, accidental impacts during loading or unloading of groceries, or material fatigue over time.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Water Inlet Valve is an OEM part for Whirlpool refrigerators. This part is responsible for controlling the flow of water into the refrigerator's ice maker and water dispenser system. It operates by opening and closing to allow water from the household supply line to enter the refrigerator as needed.

Over time, water inlet valves can fail or become clogged with mineral deposits, especially in areas with hard water. 

Symptoms of a bad Water Inlet Valve include:

• No water being dispensed or ice being made
• A slow or irregular flow of water from the dispenser
• Unusual noises coming from the valve area during operation
• Water leaking from the valve or at the connection points

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Door Shelf Bar is an OEM part for GE refrigerators, designed to securely hold items within the door shelves. This bar is responsible for maximizing storage space and keeping items in place, preventing them from falling out when the door is opened or closed. Made from durable materials, the door shelf bar is designed to withstand the regular opening and closing of the refrigerator, as well as the weight of items typically stored in door shelves, such as condiments, bottles, and jars.

This shelf bar measures 23” wide by 2.5” high and 7” deep.  

Symptoms of a failing Door Shelf Bar include:

• The bar becoming loose or detached from the door
• Cracks or breaks in the bar 
• Difficulty fitting the bar back into its slots 

Causes of a bad Door Shelf Bar can range from normal wear and tear, which weakens the bar over time, to accidental damage, such as placing too much weight on the bar or mishandling. Additionally, exposure to extreme temperatures or cleaning chemicals can degrade the material of the bar, leading to brittleness.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

The Vegetable Pan Cover is an OEM replacement part for GE refrigerators. It is a crucial component designed to fit snugly over the vegetable or crisper drawers, helping to maintain the optimal humidity and temperature levels within these compartments. This white cover measures approximately 24 inches wide by 19 inches deep.

Causes of a bad vegetable pan cover can include physical damage, such as cracks or warping, or wear and tear over time, which can affect the cover's ability to seal properly.

Symptoms of a bad vegetable pan cover include:

• Wilted or dried-out produce in the crisper drawers
• Condensation buildup within the drawers or on the cover itself
• Difficulty in properly sealing or closing the cover
• Visible signs of damage or wear on the cover

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Run Capacitor is an OEM replacement part for Frigidaire refrigerators. This electrical component plays a crucial role in providing the initial torque needed to start and run the compressor motor, ensuring efficient and reliable operation of your refrigerator's cooling system.

Causes of needing to replace the run capacitor can include normal wear and tear over time, exposure to high temperatures or electrical surges, or physical damage to the capacitor itself.

Symptoms that may indicate a failing run capacitor include:

• The refrigerator not running or cooling properly
• The compressor failing to start or running intermittently
• Humming or buzzing noises coming from the compressor area

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore refrigerator models. 

The Refrigerator Ice Bucket Assembly is an essential component for maintaining efficient ice storage in your Samsung refrigerator. This genuine OEM part is specifically designed to ensure a perfect fit and seamless integration with your appliance. The Ice Bucket provides a reliable and durable compartment for storing ice cubes, making it easy to access ice whenever you need it. Crafted from high-quality materials, this assembly helps maintain the purity and integrity of your ice, preventing leaks and spills that can lead to a messy refrigerator. Installing the Refrigerator Ice Bucket Assembly is simple and straightforward, allowing you to restore your fridge's functionality without any hassle. Compatible with a wide range of Samsung refrigerator models, this genuine OEM part guarantees long-lasting performance and optimal ice management. By choosing the Ice Bucket Assembly , you ensure that your refrigerator operates smoothly, enhancing your overall kitchen experience. Whether replacing a damaged or missing ice bucket, this genuine OEM part is the perfect solution to keep your Samsung refrigerator organized and efficient.

NOTE: AS OF 07/2014 IF CHANGING ICE TRAY BUCKET ASSY YOU WILL

• NEED TO ORDER NEW LATCH PRT# DA97-14471A OR CAN GET KIT WITH
• BOTH PARTS PRT# DA82-01396A 

The Refrigerator Defrost Thermostat is essential for maintaining the optimal performance of your Samsung refrigerator. This genuine OEM part precisely controls the defrost cycle, preventing excessive frost build-up and ensuring efficient cooling. Designed specifically for Samsung refrigerators, it guarantees a perfect fit and easy installation. By regulating the defrost heater, the thermostat helps extend the lifespan of your appliance and enhances energy efficiency. If your refrigerator is experiencing issues like excessive frost or inconsistent cooling, replacing the defrost thermostat with this reliable part can restore its functionality. Trust the Refrigerator Defrost Thermostat to keep your fridge running smoothly, ensuring your food stays fresh and your kitchen operates efficiently.

Replaces a worn refrigerator door seal on the fresh-food compartment to restore a tight, even seal. Helps maintain cold temperatures, reduce condensation around the door, and cut energy loss when the old gasket is torn, warped, or gapped.

What it does

• Creates a continuous seal around the fresh-food door to keep cold air in.
• Helps prevent warm-air leaks that cause temperature swings.
• Reduces moisture/sweating along the door edge.
• Addresses gaps, tears, cracks, or a gasket that won’t lie flat.

What’s included
One refrigerator door gasket for the fresh-food door (black).

Install notes

• Unplug the refrigerator before starting.
• Warm the new gasket (soak in warm water or use low-heat hair dryer) to relax folds.
• Seat the gasket lip fully into the door channel—start at the corners and work around.
• Close the door and check for uniform contact (paper-pull test); level/adjust hinges as needed and allow 24 hours for the gasket to conform.

The Bucket Auger is an OEM replacement part for GE refrigerators. It is located inside the ice bucket and is responsible for moving ice from the storage compartment to the dispenser chute when you select ice dispensing. The auger rotates to transport ice cubes or crushed ice to the dispenser, ensuring smooth and efficient operation.

Over time, the bucket auger can wear out or become damaged due to regular use, exposure to moisture, or ice jams. A faulty auger can disrupt the ice dispensing process and reduce the functionality of your refrigerator’s ice maker.

Symptoms of a bad bucket auger include:

• Ice not dispensing or dispensing inconsistently
• Grinding or clicking noises during ice dispensing
• Ice cubes getting stuck or not moving through the chute
• Visible damage or corrosion on the auger

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Cantilever Bin is an OEM part for Whirlpool refrigerators. It attaches to the inner door panel, providing adjustable and accessible storage for various items like condiments, jars, and drinks. This bin measures approximately 14 by 4-1/4 by 3-3/8 inches

Causes of a bad Cantilever Bin can include cracking due to overloading or impact, wear and tear from regular use, and damage from harsh cleaning chemicals that can weaken the plastic. It's also possible for the mounting hooks to break, which would prevent the bin from securely attaching to the refrigerator door.

Symptoms of a bad Cantilever Bin include:

• Difficulty in securing the bin to the door
• Visible cracks or stress marks in the plastic
• Sagging or leaning when the bin is loaded
• The bin detaching from the door unexpectedly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Dairy Door is an OEM replacement part for  Frigidaire side-by-side refrigerators. Located inside the fresh food compartment, it provides a dedicated storage area for milk, yogurt, cheese and other dairy products requiring colder temperatures. The door measures approximately 9 inches wide and 5 inches high.

Causes of a bad dairy door include normal wear from repeated opening and closing over time. Exposure to spills inside the refrigerator can also potentially damage door shelf components or seals.

Symptoms of a bad dairy door are: 

• Difficulty opening or closing the door smoothly  
• Door alignment issues where it does not sit flush in the frame
• Leaks or moisture inside the dairy storage area
• Damage or cracks in shelf supports or gasket seals

This OEM part is also compatible with models from brands like Electrolux, Gibson, and Kelvinator brand models.

NOTE: For white use 240337701

The Refrigerator Shelf Glass is an OEM part compatible with GE refrigerators. It is a durable and transparent glass shelf designed to provide ample storage space within the refrigerator compartment while allowing clear visibility of the items stored on it.  The shelf measures 22" W x 13 3/8" D and 1/8" thick.

Causes of needing to replace a refrigerator shelf glass can include physical damage from impact or excessive force, warping due to temperature fluctuations or moisture over time, or general wear and tear from repeated use.

Symptoms of a bad refrigerator shelf glass include:

• Visible cracks or chips in the glass
• The shelf becoming loose or unstable, causing items to slide off
• Difficulty sliding the shelf in and out of its designated position

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Water Valve Assembly is an OEM part for LG refrigerators. It is essential for controlling the flow of water to the ice maker and the water dispenser. This solenoid-operated valve responds to signals from the refrigerator’s electronic control system to accurately manage the release of water, ensuring efficient operation and reliability.

Symptoms of a bad Water Valve Assembly include:

• The ice maker not producing ice or producing very small cubes
• The water dispenser not functioning or dispensing a trickle instead of a steady flow
• Water leaking from the refrigerator

Causes of a bad water valve assembly can stem from mineral deposits that clog the valve, electrical failures that impair the valve’s operation, or wear and tear from normal usage leading to leaks or malfunctions.

This OEM LG part is also compatible with Sears/Kenmore.

Note: Flow meter is not needed on all models, remove if necessary. Redesigned single valve replaces older dual solenoid valves. Wiring harness is included. Located behind the refrigerator.

The Water Inlet Valve is an OEM replacement part for Frigidaire washing machines. It is a component responsible for controlling the flow of water into the washing machine tub during the wash and rinse cycles.

Symptoms of a faulty Water Inlet Valve include:

• No water or insufficient water entering the washing machine tub
• Washing machine not filling or taking an excessive amount of time to fill
• Leaks or water dripping from the inlet valve area
• Unusual noises or vibrations during the fill cycle

Causes of a bad water inlet valve can include normal wear and tear over time, sediment buildup or blockages, electrical malfunctions, or physical damage from water pressure issues or freezing conditions.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore washing machine models.