Microwave Damper & Related

The Damper Bracket is an OEM component for LG microwaves. Located inside the microwave cavity above the wave stirrer, this bracket holds the position of the damper assembly that helps distribute heat evenly during cooking. The bracket measures approximately 12” by 5”.

Symptoms of a bad damper bracket can include:  

• Hot or cold spots developing within the microwave cavity
• Looseness in the damper assembly fit
• Reduced heat circulation leading to uneven cooking

Causes typically consist of cracking over long-term heat exposure. Repeated opening/closing of the damper may also weaken attachment points on the bracket.

This OEM LG part is also compatible with Sears/Kenmore microwaves. 

The Air Damper is an OEM part for Whirlpool microwave/range hood combos. It is a crucial component that regulates the flow of air into the microwave cavity, helping to maintain proper temperature and airflow during operation.

Symptoms of a faulty Air Damper include:

• Overheating or uneven heating of food items
• Excessive noise or rattling sounds during operation
• Error codes related to temperature or airflow issues

Causes of a bad Air Damper can include wear and tear over time, physical damage or obstruction, or issues with the damper's motor or control system.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore microwave models.

The Damper is an OEM component for LG microwaves. Located within the cooking cavity, it regulates airflow and safely vents steam escaping heated foods. 

Causes of a faulty damper can involve standard wear and exposure accepting steam and condensation release. Food or liquid particles drying within tracks also threaten eventual adhesion issues restricting travel if left unaddressed between cleanings.

Symptoms of a damaged or defective damper include:

• Inability to adequately vent excess moisture from heating  
• Potential messes spilling beyond the microwave frame  
• Grating sounds or squeaks emitting during cooking
• Flaps possibly stuck inhibiting steam circulation 

This damper is also compatible with Kenmore microwaves as well.

This damper is the exhaust vent flap for a microwave. It opens to let air flow out while venting and closes when the fan is off to help prevent drafts, moisture, and debris from entering the unit.

• Directs airflow from the microwave to the outside or recirculation duct
• Helps prevent backflow of air and odors when the fan is off
• A common cause of rattling noises, poor venting, or backdrafts during operation
• Replaces a warped, stuck, or missing vent flap to restore proper ventilation

• Disconnect power before servicing
• Access is typically from the top or rear once the unit is removed or tilted forward
• Note airflow direction and hinge orientation before removal
• Ensure the flap moves freely after installation and proper airflow

The Microwave Damper Main Assembly is an essential component for maintaining optimal airflow in your Samsung microwave. Designed to ensure proper ventilation, this genuine OEM part helps regulate the temperature inside your appliance, preventing overheating and enhancing performance. Crafted with high-quality materials, the Microwave Damper Main Assembly offers durability and reliable functionality, ensuring your microwave operates smoothly for years to come. Installing this part is straightforward, allowing you to quickly restore your microwaveGÇÖs efficiency without the need for professional assistance. By replacing a faulty or damaged damper with this genuine OEM component, you can enjoy consistent cooking results and prolong the lifespan of your Samsung microwave. This assembly is specifically compatible with a variety of Samsung microwave models, guaranteeing a perfect fit and seamless integration. Investing in the Microwave Damper Main Assembly not only improves your microwaveGÇÖs ventilation system but also contributes to energy efficiency, providing a better overall user experience. Trust in this high-quality replacement part to keep your kitchen appliance running at its best.

The Damper is an OEM part for Frigidaire microwaves. This part regulates airflow within the microwave, ensuring that steam and odors are properly vented out during cooking.

Causes of a bad damper can include wear and tear over time, buildup of grease and debris, or damage from high temperatures.  

Symptoms of a bad Damper include:

• Poor ventilation during cooking, leading to lingering odors and steam
• The microwave overheating or not ventilating properly
• Unusual noises coming from the damper area
• The damper not opening or closing as it should

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Hood Damper Assembly is an OEM part for GE microwave ovens. This part controls the flow of exhaust air to minimize odors and smoke from cooking. This damper opens to allow air to vent outside during microwave operation and closes to prevent outside air from entering when the microwave is not in use.

Causes of a bad hood damper assembly can include mechanical failure such as a stuck or broken damper, deterioration of the linkage or springs that operate the damper, and blockage caused by grease or debris accumulation, which can impair its functionality.

Symptoms of a bad Hood Damper Assembly include:

• Ineffective venting of smoke or cooking odors
• External air leakage into the microwave system
• Unusual noises during operation indicating a damper misalignment or obstruction

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Damper is an OEM part for GE microwaves. This part controls the airflow within the microwave, allowing steam and hot air to be vented properly during cooking. The damper opens and closes to regulate the release of excess moisture and heat, ensuring optimal cooking performance and preventing overheating.

Causes of a bad damper can include wear and tear from regular use, buildup of grease or food particles, or mechanical failure.

Symptoms of a bad damper include:

• Excessive steam or heat buildup inside the microwave
• Unusual noises during operation
• The microwave overheating or shutting down unexpectedly
• Inconsistent cooking results

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This is an authentic OEM replacement waveguide sourced directly from the manufacturer. Waveguides are used in microwave ovens to help transmit the radiation throughout the microwave's inner cavity. The waveguide also protects the microwave's inner parts from damage due to steam or spattering food during operation. If the waveguide breaks or cracks, as can happen to plastic parts over time, it should be replaced to protect the mechanical workings of the microwave. Although the microwave can be used without the waveguide, it is not recommended.The waveguide is located inside the cooking area of the microwave over the control panel. It is a thin piece of material that may resemble cardboard. To start, disconnect the microwave from the wall outlet and use a screwdriver to remove the two screws holding the waveguide in place. Discard the broken waveguide and use the screws from the original waveguide to install the new one. Plug the microwave back into the outlet. This waveguide is made of durable plastic and is sold individually. This waveguide does not come with screws. It is designed for use in microwave ovens manufactured by General Electric.

This molded resin cover is a protective plastic shield used inside the microwave. It helps protect internal components and ducting from splatter and debris and restores a secure, finished fit when the original cover is cracked or missing. What it does:

• Shields internal components from grease, steam, and food splatter inside the unit
• Helps maintain proper airflow paths and a snug, rattle-free fit
• Common replacement when the original cover is cracked, warped, loose, or missing
• Visual cue: exposed internal parts or a cover that won't stay secured

• One resin (plastic) cover

• Disconnect power (unplug or switch off the breaker) and allow the unit to cool
• Access the cover location; remove retaining screws/clips and keep hardware for reuse
• Align the new cover and secure it without overtightening
• Ensure the cover is fully seated and not contacting nearby moving parts before restoring power

This damper assembly controls airflow between the freezer and refrigerator compartments to help maintain even temperatures. Replaces a faulty damper to restore proper cold-air distribution and reduce temperature imbalances. What it does:

• Opens and closes to regulate cold air flow from the freezer into the fresh-food compartment.
• Commonly used when the refrigerator section is too warm while the freezer remains cold.
• Can stop excessive air flow that causes frost build-up or noisy operation.
• Works with the fridge's control system to modulate compartment temperatures.

• One damper assembly

• Disconnect power before starting work to avoid electrical hazard.
• Access typically through the fresh-food or freezer interior; remove panels as needed.
• Handle the actuator and wiring carefully; ensure connectors are fully seated.
• Test operation after installation and reassemble panels securely.

This air guide directs airflow inside the dryer to improve venting and drying performance. Replacing a damaged guide restores proper air path and helps the dryer run more efficiently and quietly. What it does

• Channels warm air from the blower to the drum and exhaust system to maintain proper airflow.
• Helps prevent air leaks that can cause longer drying times or uneven drying.
• Reduces turbulence that may cause rattling or whistling noises during operation.
• Keeps airflow directed away from internal components to limit lint buildup in sensitive areas.

• Disconnect power (and gas supply for gas dryers) before starting any repair.
• Basic disassembly of the dryer cabinet or front panel may be required; follow the model's service manual.
• Keep track of fasteners and gently handle plastic clips to avoid breakage.