String Trimmer Cap, Lid & Cover

Here is an authentic fuel cap assembly that is a replacement for the cap that comes on many gas-powered lawn and garden tools. The cap provides protection and security for the fuel tank opening, so no dirt or debris gets into the fuel. This fuel cap assembly features a retainer, which will keep the cap attached to the tank when refueling. The retainer ensures that the cap does not become lost or fall to the ground. Over time, there could be many issues with the current fuel cap on the machine. It might no longer provide a tight seal. It might no longer have a retainer, or it could have cracked due to age or an accident. Regardless, it is a good idea for owners to get a new fuel cap assembly to ensure the integrity of their fuel. No tools are needed for adding the new cap to the machine. This genuine OEM replacement fuel cap assembly is sold individually. The assembly will work as a replacement for more than 50 machines including edgers, string trimmers, brush cutters, and leaf blowers. It is compatible with models from Husqvarna and Craftsman.

This genuine MTD belt cover can be used as a replacement part for lawn and garden appliances that are operated by small engines, such as lawn tractors, snowblowers, chipper shredders, leaf blowers, edgers, and lawnmowers. The purpose of a belt cover is to protect the gears, the belt, and the engine and its components from accumulating dirt and debris internally, which can cause individual components to malfunction and fall into disrepair.A belt cover will have to be replaced in the event that it can no longer protect the gears, the belt, and the engine. A belt cover can suffer from damage as a result of overuse or direct collision; this form of damage can limit the ability of the belt cover to perform its precautionary function. Remember that gloves must always be worn when handling, repairing, and operating outdoor equipment. This OEM belt cover part is compatible with the following brands: MTD, Craftsman, Cub Cadet, and Yard Machines. This part is sold individually.

This is a genuine replacement air box cover. It fits over the air box housing and helps to prevent dirt and debris from entering, while also preventing the air filter from becoming wet in the case of rain or falling out during use. The air filter is essential for ensuring clean air for combustion within the engine. The air box cover is made of durable plastic. However, over time, plastic components can become brittle with exposure to high heat and harsh sunlight, leading to cracks and damage. The air box cover can also be damaged if the machine is dropped or through contact with hard surfaces. Replacing the air box cover is a simple process. A plastic knob holds the cover to the base. Simply twist and remove the knob, and then remove the damaged air box cover. Replace it with the new cover and put the knob back in place. This replacement air box cover fits several Husqvarna edgers, brush cutters, and trimmers. Note that this is a genuine OEM part and is sold individually.

This is a replacement oil cap for a variety of small gasoline-powered tools they build. These devices include power saws, chainsaws, trimmers, and pruners. The oil cap is tethered to the oil tank, granting easy access to the engine oil for filling or replacement while preventing outside contaminants from getting into the oil basin and, thus, the crankcase. While the cap is not a moving part, it is one of the most exposed pieces of this work equipment. As such it collides with multiple heavy objects such as other tools, trees, cement structures, and truck beds. This type of wear and tear can cause the interior threads of the cap to warp so that the cap cannot be closed tightly. The cap can also be damaged so that it leaks. For safety reasons as well as for the proper operating condition of the equipment, a damaged oil cap should be replaced immediately. Make sure when removing the old cap that the tether is completely freed from the power tool, and make sure the new tether is properly attached. This replacement cap is a genuine OEM part, built to the same specification as the factory original piece and fits Ryobi and Poulan machines.

This is a fuel cap that is used with several types of small engine lawn and garden equipment. The purpose of the fuel cap is to make sure that all gasoline in the fuel tank stays in place and there are no leaks present. The fuel cap can experience wear and tear over time or become cracked, broken, or damaged if it impacts other items. If fuel can be smelled through the cap, if the cap doesn't tighten, or if it is otherwise visibly damaged, the fuel cap should be replaced.Prior to replacement or even removing the fuel cap, the equipment should be placed in a well-ventilated area. It's also important to disconnect the spark plug wire to create a safe environment. Empty any fuel in the tank into an appropriate container before moving on. Once empty, you can replace the old cap with a new one.This is a genuine OEM replacement component that is directly sourced from the manufacturer. It is sold as a single fuel cap. The part is created to be compatible with string trimmers, hedge trimmers, and leaf blowers manufactured by Poulan, Poulan Pro, and Craftsman.

This is a standard fuel cap for a hedge trimmer, chainsaw, or weed eater. The fuel cap assembly goes into the tank then screws onto the top of the fuel tank. A fuel cap keeps dirt and debris from falling into the fuel tank and gunking up the engine, causing it to misfire or corrode. Fuel cap assemblies are made of plastic, so they can dry out and snap. If the rubber seal on the fuel cap assembly is no longer preventing fuel from leaking, it’s time to replace it. Installing a new fuel cap assembly is simple. Just push the stopper in and screw on the lid. This is a genuine OEM product shipped from Husqvarna, the manufacturer of this part. This part is also compatible with Craftsman and Poulan products. Part sold individually.

This replacement part includes one fuel cap assembly and is compatible with specific models of gas-powered blowers and trimmers. This part is made of high-quality plastic. It consists of a black cap that is approximately 2 inches in diameter with a retainer connection to keep the cap from falling on the ground. The cap is meant to cover the fuel tank's fill nozzle. Replacing a lost, leaky, or damaged cap won't require any tools. This original OEM part is designed to deliver a perfect fit for compatible equipment. It is compatible with outdoor power equipment from Craftsman, Husqvarna, Poulan, and Weed Eater. This replacement part is sold individually.

This replacement part is a gear cap. This is a genuine replacement part made by Husqvarna. This part is small but used to keep different gears within the lawnmower safe and secure during use. This part is made of durable plastic and meant to be a strong protector for many gears. A new gear cap might be needed if the current one is missing or damaged in any way. This can include being dented, bent, cracked, or chipped. If the gear cap is not able to stay in place, it might be time to replace it. Be sure to wear work gloves during this repair. It is also recommended that the user refers to the appropriate user manual before replacing this part. This part is sold individually and is sourced directly from the manufacturer. This part is also a genuine OEM replacement part to ensure proper fit and long-lasting use.

This genuine OEM air filter assembly is a complete unit that aids in filtering the air that comes into the engine while the trimmer is in use. The plastic housing protects a foam filter that catches dust and debris. Over time, air filters become clogged with regular use and are usually replaced as a part of routine maintenance. In the event that the air cover or base becomes damaged, however, a replacement of the entire assembly may be needed. This part can do the job for compatible machines. This OEM air filter assembly is manufactured by MTD and meets exact standards for original equipment manufacturing. It is compatible with many trimmers from MTD and Craftsman. The replacement of the air filter assembly requires a screwdriver to remove the mounting screws of the old base and secure the new unit in place. Be sure to allow the engine to cool completely before doing any repairs. Since air filters are known to clog, it may be a good idea to purchase an extra one to have on hand in case of emergencies. This is sold as an individual unit and includes the foam filter along with the plastic housing.

This genuine Husqvarna oil cap can be used as a replacement part for string trimmers, chainsaws, pole pruners, and pole saws. An oil cap in a small engine appliance provides a shield between the fuel line and the exterior of the appliance such that dirt, debris, pebbles, or other external materials cannot enter into the fuel line and such that fuel cannot leak out of the appliance.If an oil cap shows visible signs of damage, it should be removed and replaced immediately with this genuine OEM replacement part. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This oil cap is compatible with the following brands: Husqvarna, Poulan, and Weed Eater.