Wall Oven Parts

After doing some research the problem appeared to be the door safety switches. I ordered 3 new ones to replace all the original ones. Some minor disassembly of the microwave front was required to reach the fuse and switches. To reach the switches the control panel wires needed to be unplugged and the panel removed. After doing that replacing the switches was pretty strait forward. As of this comment the microwave has worked for 5 days without blowing the fuse so far. This has probably fixed the... Read more

• Won't start

Purchased new burner assemblies and burner grates from Appliance Parts Pros to replace old, worn out ones. This job was easy as all parts purchased were unpack and place. My range is about 15 years old but is in pristine condition so instead of replacing the range, I chose to replace dirty, worn parts. Read more

• Takes too long to dry

Get some acetone at a Hardware Store before you start. A pint will do. Unplug the dryer from 110 VAC. Pull the top off of the dryer, by lifting it from the front first. It is attached with snap metal fittings. Do not completely remove the top, just tip upright to gain access to the front interior of the dryer. Before you pull any wires from the door switch, record which color wires go to which terminals on the door switch. If you reassemble the connections incorrectly, the gas value will... Read more

After many years of excellent service the burner I use most often on the top of my JenAir range rusted through. After trying to remove the burner, which was firmly rusted into place, I decided to replace the cooktop pan, both burners and igniters. It was an easy repair to swap out the new parts for the old, and the only tool necessary was a #2 phillips screw driver. The only difficulty was that although the cooktop pan appears symmetrical, the screw hole pattern on each side is different. I did... Read more

Installed new heater element. Read more

Replaced the damaged items. I ordered the items in the afternoon and received them the next day. Read more

Ordered replacement drip pans Read more

I went online to Appliance Parts Pros and with only my model # and serial # of my range, it was a simple fix! They not only had the part I needed, but they provided the expanded drawing so I could see what was needed and when I had a question and emailed them, I received a response within a couple of hours. They shipped right away and the glass was at my front door in 2 days! This company is fantastic!!!! Read more

• Element will not heat

My cooktop repair was a total success from start to finish. I reviewed and later followed the APP repair video, which helped me decide if I wanted to tackle the repairs and guided me right before I started. The APP phone staff member was very helpful verifying the parts I had identified online using the model number of my older GE Profile cooktop to locate and view the correct online exploded view diagram. I told him it was a pleasure working with him. The parts arrived within 3 days of... Read more

I found the one at great price at Appliance Parts Pro. Fan came fast! TaDa fixed within days! Thanks!! Read more

The heating element contact ears and the terminal block contacts were burnt on the existing burner. I ordered the new terminal block kit and surface heating element from Appliance Parts Pros. Delivery was exceptionally fast (I just used regular shipping). The new terminal block kit came with very long wires, so I cut them and installed new terminal ends, rather than zip-tie the long wires together. Very happy with repair. Read more

I tried swapping the cables around by putting the cables from the burners that would light onto the ones that didn't light. When I did that the problem would move. So this is how i determined that the issue was with this module and not the burners or cables. Once this new module arrived it was simple to disconnect the old one and put the cables back on the new one. I tested it (holding by breath!) and then all of the burners started. HOORAY! Read more

Watched the video here, took the leap that burner was the problem and ordered it. Also found another vid on you tube that was more specific to my Kenmore. Tip: find out how to take off the oven door. For mine it was very easy but not detailed in the APP vid. I followed instructions in APP vid but also first took off back panel of range and tested resistance of old burner to ensure that was truly the problem (as suggested by other YT vid). Also, dis/connecting the wires from the back is easier... Read more

I ordered the correct part from AppliancePartsPros.com. When I received it, I opened the package and identified the parts I would need for my application. I cleaned up around my work space, then turned the power off to the appliance. I removed all the burners to get to the mounting screws for the range top. I then lifted the range top and supported it so I could see what I was working on . I first inspected all the wiring for breaks, or fraying. Then I moved on to the switch. Two screws... Read more

I bought the replacement knobs from Appliance Parts Pros.com and they were much better knobs that what originally came with the unit. They are actually metal and the plastic posts that connect with the range are a much higher grade plastic. To be honest I think the stove works better than it did when it was new. Some of the original knobs may have been broken when we purchased the unit. Replacement took under 5 minutes for all of the knob. Oh....and by the way....they appear to be the same... Read more